Jump to content
SAU Community

Recommended Posts

hey guys,

never meant to rebuild my 20 but it cracked a head so i built a new one

it has

-completely reconditioned head..valve grind and seals etc

-ACL race series main and big end bearings

-Mahle piston rings

-Cometic 1.2mm metal head gasket

-Every seal and gasket replaced

-GTR injectors

-Adjustable cam gears

-Gates Racing Triple Strength Timing Belt

-Getting the ECU retuned by MRC Performance with the nistune software

now it comes to turbo...hmmmm

dont have heaps of money so i cant afford the garrett i wanted

someone through work offered me an unused KKR560 turbo for a price i couldnt refuse

IS IT TOO LAGGY? its about the same size as a Garrett 3076

I dont care if it spools up to full boost at about 4000-4500rpm just not much later

advice pls

Link to comment
https://www.sau.com.au/forums/topic/266622-turbo-selection/
Share on other sites

To laggy IMHO. RB20 doesn't spool dtuff real well. What kind of stuff do you want to do with the car? If you went to the trouble to go forged internals on a RB20, one might assume you are chasing power levels that would involve turbo's that are going to be laggy anyways. Did you already buy it? Is it bolt on, or are you planning on a manifold and external gate or something. If your going to the trouble of a top mount and external wastegate anyways on a budget, I'm a big fan of Holset turbo's. Search on this board and you'll find some info. HX35 sounds like it would be right up your alley.

Also, can you please remove the HEEELP! from the title since you, in fact, don't actually need urgent help of any kind and you are just asking a question. I'm so sick of clicking on stuff like that expecting so see somebody needing urgent help with something like a blown motor or "I can't get this back together!" and seeing a question about which turbo or what blow off valve.

Edited by Cjmartz2k
Link to comment
https://www.sau.com.au/forums/topic/266622-turbo-selection/#findComment-4551217
Share on other sites

Also, can you please remove the HEEELP! from the title since you, in fact, don't actually need urgent help of any kind and you are just asking a question. I'm so sick of clicking on stuff like that expecting so see somebody needing urgent help with something like a blown motor or "I can't get this back together!" and seeing a question about which turbo or what blow off valve.

Sorry bout that i was looking at buying it then and there almost so i did want urgent help but point taken.

have decided to go with the humble KKR430

want to a tough street car with good circuit and drift ability so got all that stuff plus recaro seat and full whiteline catalog almost lol

also my speedo just randomly stopped working...not the drive in the gearbox or the bottom of the cable...new dash needed maybe?

Link to comment
https://www.sau.com.au/forums/topic/266622-turbo-selection/#findComment-4562152
Share on other sites

also my speedo just randomly stopped working...not the drive in the gearbox or the bottom of the cable...new dash needed maybe?

Can you see the nib spinning around inside the dash portion if you have somebody below the car spinning the other end of the cable?

Link to comment
https://www.sau.com.au/forums/topic/266622-turbo-selection/#findComment-4562380
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...