Jump to content
SAU Community

Recommended Posts

Hi guys,

I have heard differing stories about this. Some people on here seem to have mentioned that the V35 (specifically the VQ25DD engine for the 250GT) runs with a timing chain instead of a belt, which hence would not need replacing.

However, I have checked both in my V35 Skyline owner's manual (with maintenence schedule) and also under the bonnet, and in both places it says to replace the timing belt at 100,000km.

Does anyone here know for sure?

maybe they mean engine belts, like what would have been called the fan belts except they are now thermostatically controlled or viscous controlled.

anyway, all VQ engines run a timing chain that probably wont need changing in the life of the engine if its looked after

zei20l is correct.

Timing CHAINS for all VQ's.

Yes, under my bonnet it states timing belt change at 100,000kms... But I assure you, the VQ engine has a timing chain.

Why don't you call Nissan if you are still unsure?

Thanks for this info. I guess I just struggle to understand why they would put that under the bonnet and also in the service guide if it wasn't necessary and they run a chain. That would seem strange.

I've asked Nissan many things regarding the V35/VQ engine, and frankly they have been pretty useless on every occasion so far.

But thanks for clarifying.

I've asked Nissan many things regarding the V35/VQ engine, and frankly they have been pretty useless on every occasion so far.

Try a different dealership. :banana:

Or just change the vehicle reference to "350z"

Some know what they are talking about and find a imports interesting whereas others (the majority, unfortunately) just go through the motions.

Edited by iamhe77

those manuals you get have probably been 'converted' from the R32/32/34 days and they neglected to change the timing belt thing because - well, i dont know why, but whatever the reason its wrong :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...