Jump to content
SAU Community

Recommended Posts

Cool, I'll be on my way around to collect it in 5 minutes :)

That is a good price, I had a quick squiz on Ebay to see what they were going for. I would have gone down the NisTune road but it appears the M35 computer doesn't like the current versions of the NisTune boards available.

Let us all know how you go with the E-Management Ultimate, sounds like a cost effective solution instead of replacing the whole ecu system.

Let us know how it all goes, I did a bit of work on the ECU pinouts and have put together this drawing. There was some common inputs that I couldnt find / stopped trying to find on the harness like boost & O2 so if you know what pins these are then let me know.

ECU_Pinouts_Model__1_.pdf

well, pending avaliability next weekend - and thanks to your diagram - ill install it and get it running (with everything unadjusted) to make sure it works. then it will be a wait for the mods to happen before a drive to melbourne for a tune!

thanks for the offer of help, ill post in here so its available to anyone else that might be doing the same thing

well, pending avaliability next weekend - and thanks to your diagram - ill install it and get it running (with everything unadjusted) to make sure it works. then it will be a wait for the mods to happen before a drive to melbourne for a tune!

thanks for the offer of help, ill post in here so its available to anyone else that might be doing the same thing

No problems, Ive been waiting for a fully tunable ECU alternative, like FLASH'g the existing or aftermarket ECU but no one has done this yet. Im using SAFC2 at the moment and its working fine but not very tunable.

ok so im set to install this on the weekend.

the only thing that worries me is the settings on the actual unit, the jumpers, and also the firing order for ignition

in my S15 i had to wire 1,2,3,4 to 1,3,4,2 due to a 4 cylinder firing order, i destroyed 2 coilpacks with incorrect wiring, and i dont want to risk that on this car.

they mention V6 engines, and with nissan being nissan they will probably have kept it fairly standard config. im going to google emanage ultimate installs on a VQ35DE engine from the states, i believe they act the same, even if the ECU is wired differently.

fingers crossed!!!

ok here is an install doco for G35 (US) that looks pretty good. ignore the wiring to the ECU, however his technique and setup is good, and it covers some nissan 'problems' etc.....

DandyMaxEUWriteup.pdf

may as well keep all the Emanage Ultimate stuff in the same place. make it easier for other guys to find and us to assist with

so once ive done my install, are you gonna drive to sydney to get me to do yours too?? :)

cheap rates :):P

may as well keep all the Emanage Ultimate stuff in the same place. make it easier for other guys to find and us to assist with

so once ive done my install, are you gonna drive to sydney to get me to do yours too?? :)

cheap rates :):P

Haha. You would have to be bloody cheap.

Remember I can get it installed & tuned for a damn good price.

Edited by iamhe77
are you gonna drive to sydney to get me to do yours too?? :)

cheap rates :P:P

Ahem... I do hope you are referring to the E-Manage Ultimate :)

I'll be interested to see how it goes and what you think of it after it's had an optimal tune :D

I assume you are going for high output rather than fuel efficiency ;)

But I'm sure you can adjust that on the fly or atleast with a laptop running windows?

I've got a apple laptop so that wouldn't be too good for the whole USB software adjustment etc.

ahh yeah damn i forgot you were already IN melbourne for that tuner lol

yeah you can tune it on the fly with a laptop, but id be doing it on a dyno so its done properly.

ill be tuning for less fuel down lown, and more power up top because i drive easy around the city where i need economy, but when i put my foot down i dont give a shit lol

id be doing it on a dyno so its done properly.

ill be tuning for less fuel down lown, and more power up top because i drive easy around the city where i need economy, but when i put my foot down i dont give a shit lol

+1 (or is that +2?)

so yesterdays install didnt occur. the pin layout diagram i have may be incorrect. i was metering out +12v and 0v and neither of them were correct. so either i cant use a multimeter anymore, im reading it backwards, or the diagram is incorrect.

not sure what im going to do at this stage.............. might try again when i dont have a headache lol

so yesterdays install didnt occur. the pin layout diagram i have may be incorrect. i was metering out +12v and 0v and neither of them were correct. so either i cant use a multimeter anymore, im reading it backwards, or the diagram is incorrect.

not sure what im going to do at this stage.............. might try again when i dont have a headache lol

Hmm... Too many variables there.

Perhaps ask URAS (Trent from Status Tuning - here in Melb)

Also, check out his eManage Ultimate thread.

Edited by iamhe77

nah no updates mate, with mothers day yesterday i didnt get a chance. ill see whats on this weekend before i give it another go. im prepping the wiring so the hopefully ill just need to plug it in after i crimp the wires

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...