Jump to content
SAU Community

Recommended Posts

yup the softest setting on mine is pretty pussy, but its firm, like a new car.

i run mine around 7-8 at the rear, and about the same at the front, maybe a little softer so it doesnt rattle the entire front end off the car

It's always interesting to see the differences in peoples preferences, even when using very similar set ups. Stiff is not necessarily fast; but it can often give that impression.

I'm running 3 clicks in from full soft on the rear, and fully soft on the front. Before fitting my Sway Bars, I was running 3 clicks in from full soft on the front to get some bite on turn in, but once I had the bars on, I found the front wanted to follow every groove and was just too "darty" on turn in and had to soften it. I'm not running any Preload on my front springs as I feel it only adds to the bouncy feel (springs pushing back too hard on rebound) some people find with coilovers.

I still have stacks of bite on turn in, but the front end is much more compliant over choppy stuff and I believe it has more "feel" and is quicker in corners now. I think if you set up too stiff, you don't allow the weight transfer that is needed to get good mid corner grip and feedback. You just end up with a really sudden transition to understeer/oversteer; especially in wet conditions.

Like I said, not saying anyone is right or wrong; but I'm interested in others opinions in this regard.

Cheers, Dale.

Front 10kg/mm, rear 12kg/mm. That's the BR's, not sure about the V1's.

I'll go the BR's as there isn't much of a price difference.

Also where do you get adjustable bushes for the standard arms?

Cheers.

Front 10kg/mm, rear 12kg/mm. That's the BR's, not sure about the V1's.

I'll go the BR's as there isn't much of a price difference.

Also where do you get adjustable bushes for the standard arms?

Cheers.

I'll go the BR's as there isn't much of a price difference.

Are you getting yours thru Paul at Street to Track (www.streettotrack.com) ?

Price via him is $1,165 delivered. He won't sell the V1's, only the BR series.

I'll go the BR's as there isn't much of a price difference.

Also where do you get adjustable bushes for the standard arms?

Cheers.

http://www.superpro.com.au/find-superpro-parts-for-my-vehicle?listMake=51&listModel=334&listSeries=485&button=Search+Now

Whiteline do replacement bushes, but no adjustable one as far as I know.

Are you getting yours thru Paul at Street to Track (www.streettotrack.com) ?

Price via him is $1,165 delivered. He won't sell the V1's, only the BR series.

I was just going to go through just jap, has any one purchased through Paul?

Just got a quote from Paul, he's down to $1155 for the BC BRs. Got to love this dollar at the moment! 10 days delivery.

At that price, why would you buy V1s from Just Jap? They want $1149!

I need to do mine sooner rather than later, it just wallows awfully. Really ruins the great effect of the swaybars :(

Hi guys, been trolling through this thread for some time trying to find info on AXIS suspension.. but that aside. With all this talk of kg rates for fronts and rears.. doesn't ride quality also come down to rim size and tyres? I have 35 series tyres on 20" rims (came with the rims) with stock suspension. while being quite comfy it will still jar when hitting bumps and holes and will hop badly if taking a corner in a spirited manner :P and hitting a bump. Shouldn't there be a balance between tyre sizing and suspension tweaking? I know when I finally get my head around this car I will definitely be changing tyre sizes (maybe even rim size) and then try to balance the suspension to suit my driving. Not that there's much selection for the AXIS :(

So just in case I've missed something, is there anything adjustable available for the AXIS??

I think AXIS is the same as any other NM35, so you should be fine with the BCs.

I know what you mean with tyres, found the same thing when I bought a car with 17" 35 series. Awful ride. Hated it. I'll be putting 18s or 19s on mine, the biggest I can use while maintaining 40-45 profile.

Funny thing is my parents have an Audi they bought with 19" 35 profile tyres, and the ride is fine.

Hi guys, been trolling through this thread for some time trying to find info on AXIS suspension.. but that aside. With all this talk of kg rates for fronts and rears.. doesn't ride quality also come down to rim size and tyres? I have 35 series tyres on 20" rims (came with the rims) with stock suspension. while being quite comfy it will still jar when hitting bumps and holes and will hop badly if taking a corner in a spirited manner :P and hitting a bump. Shouldn't there be a balance between tyre sizing and suspension tweaking? I know when I finally get my head around this car I will definitely be changing tyre sizes (maybe even rim size) and then try to balance the suspension to suit my driving. Not that there's much selection for the AXIS :(

So just in case I've missed something, is there anything adjustable available for the AXIS??

IMO it does.....low profile IMO can look better(sometimes) but does mean better handling......I don't mind having a bit of a sidewall on the tyre not only to save the rim but to also stuff around with pressures to ensure the best response from your grip level in all circumstances......a bumpy road with 35 series tyres at speed can end up pretty messy and usually slower that 45 series tyres......naturally this all depends on the tyres your running!blush.gif

I think AXIS is the same as any other NM35, so you should be fine with the BCs.

I know what you mean with tyres, found the same thing when I bought a car with 17" 35 series. Awful ride. Hated it. I'll be putting 18s or 19s on mine, the biggest I can use while maintaining 40-45 profile.

Funny thing is my parents have an Audi they bought with 19" 35 profile tyres, and the ride is fine.

I thought i was in the same boat as ARX owners, being that we have HICAS and the wider track and higher stock suspension. I see the 'non ARX' note on each set of suspension and so fear the worst.

what width tyres are on the Audi? If they were like 335's or something killer like that the 35 profile would be much thicker than on our 225's and 235's

I'm actually thinking to change my rims to something smaller, maybe slightly wider and definitely thicker. I hate gutter bash so need bumper bowling tyres lol

IMO it does.....low profile IMO can look better(sometimes) but does mean better handling......I don't mind having a bit of a sidewall on the tyre not only to save the rim but to also stuff around with pressures to ensure the best response from your grip level in all circumstances......a bumpy road with 35 series tyres at speed can end up pretty messy and usually slower that 45 series tyres......naturally this all depends on the tyres your running!blush.gif

agreed on all counts. sidewall definitely helps keep power to the ground, look at street drag radials. they can hook 1000hp no problem.. and its street legal! If the Stagea wasn't 4wd I would love to put a fat tyre on the rear, both for ride and handling

I thought i was in the same boat as ARX owners, being that we have HICAS and the wider track and higher stock suspension. I see the 'non ARX' note on each set of suspension and so fear the worst.

Axis is the same as RX and RS models for suspension.

RX and RS can both have HICAS.

Axis is the same as RX and RS models for suspension.

RX and RS can both have HICAS.

Sorry mate, RX never had hicas as an option.

and AXIS has lower springs and different shocks, but yes the suspension is setup the same.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...