Jump to content
SAU Community

What Is This -> Black Plastic Cover Where Rear Mud Flap Should Be?

mario
 Share

Recommended Posts

mario Contributor

mario

Posted
Posted

hey guys,

Giving the car a good ol' detail the other day and while I'm washing I get to the rear wheel wells, and notice at the back of the

sideskirt where you would imagine a mudflap to located, that general area, there is a small black plastic cover/casing that seems

to serve no purpose other than to hold up to the last 6months of driving worth of dirt / glass / bits n pieces of whatever you ever

drive over and from wherever.

I didnt try get under the car to remove it, but there seems to be no hole so it doesnt act as a drain, its literally just there for what

seems to me, to catch dirt and make my cleaning job longer than what I had anticipated due to the amount of dirt that came out

of it.

Anyone able to shed some light on what this might actually be there for ?

You can almost bend it 120degree's to try remove the dirt it holds, and it wont snap or break and will just go straight back to its

original position also.

Be interesting to see what other people say/ think or even knew if it was there..

mario Contributor

mario

Posted
  • Author
Posted

time is limiting factor here with photos unfortunately, that and the fact it would be all black on black if I took something..

quite simple really... go to the rear wheel well of your car, you can see where the side skirt finishes, put your hand inside the wheel well

right behind the skirt and you will feel this big black plastic cover that is open at the top..

you can stick your fingers into the hole it creates, then you realise you can bend it back and all of a sudden you notice all the dirt n crap

it holds in it....

rs73 Grand Master

rs73

Posted
Posted

how would that work?

I didn't remember seeing anything around the door jamb when the doors were opened that could indicate some path of air to escape if that's to equalise the pressure...

maybe just a bad design, and they decided to put a plastic cover on top to reduce the whole crap load of sh1t it would have collected without the cover?

boodsGtr Enthusiast

boodsGtr

Posted
Posted
how would that work?

I didn't remember seeing anything around the door jamb when the doors were opened that could indicate some path of air to escape if that's to equalise the pressure...

Not necessarily from the door jam. Some cars have them so when you close the doors, the cabin pressure that builds up when you close the door is released through a vent at the rear, enabling the door to be closed easier.

Might not be the case for this, but a possibility.

Boods.

  • 2 weeks later...
scathing Grand Master

scathing

Posted
Posted (edited)

Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

Edited by scathing
BLISTC Experienced

BLISTC

Posted
Posted
Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

you still have not helped us solve the mystery... what does it do!?

mario Contributor

mario

Posted
  • Author
Posted
Is it behind the wheel? Almost like a L-shape when viewed from side on (a vertical piece, with a flat horizontal tray) where the horizontal bit is a quarter circle?

There'll be one on either side of the car, but have different shapes.

yeah thats it, no idea wtf it does or why it there though

scathing Grand Master

scathing

Posted
Posted (edited)
you still have not helped us solve the mystery... what does it do!?

Just making sure I'm talking about the right thing first. :(

yeah thats it, no idea wtf it does or why it there though

It is probably the OEM rear diffusers. They smooth the airflow leaving the rear wheel well.

On the Australian delivered 350Z, it's standard on the Track and optional on the Touring (I ended up picking up a set for my Touring from the USA). Apparently the Touring has a Cd of 0.30, and the Track (with a small chin spoiler, rear bootlid spoiler, and these rear diffusers) drop the Cd to 0.29.

When I spoke to Pro Concept about it they told me they took theirs off their race car. Like you, Josh said the only thing they were good for is collecting dirt whenever they came off the track. If it takes those 3 items above to drop the drag co-efficient by only 0.01, taking them off will probably do sweet f**k all.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • GTSBoy
      Rear Sway Bar Busshings - Holden Astra TS (2002)

      By GTSBoy · Posted

      I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Yeah - I mean, go the other way. Smaller range. Not larger.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
×
×
  • Create New...