Jump to content
SAU Community

Recommended Posts

As a simple rule of thumb, you can usually use the following formula as a guide:

(Injector CC / 5) X No. of Injectors.

That will give you flywheel hp. This is only an indication and things like rail pressure and rpm will effect their overall capability.

I would say 650-700whp would be a safe upper limit. Up the base rail pressure to 45psi and you might get them to squeeze out to 750whp but things become unsteady at that point if you haven't got the supporting hardware

Personally - I'd say 650rwhp would be the upper limit when you take into account acceleration enrichment and similar things.

I like safety blankets :P

But yeah, in the region around 400rwkw basically on PULP - rules change with Ethanol, race fuel and so on of course

Can anyone give actual figures for injectors they've used instead of just theoretical estimates? I will be pushing the limits of 700cc injectors very shortly.

So far they've done 403wkw with standard fuel pressure on 98 ron.

Can anyone give actual figures for injectors they've used instead of just theoretical estimates? I will be pushing the limits of 700cc injectors very shortly.

So far they've done 403wkw with standard fuel pressure on 98 ron.

These aren't just theoretical estimates. I gave him the ability to work it out for himself. Maybe he is going to purchase injectors and needs to know so he can decide whether or not to go for larger or smaller items.

Out of the many cars I have fitted 700cc injectors to, only 3 have ever really 'pushed close to the limit'. 420rwkw roughly for all with more room to move... none were running standard rail pressure or standard fuel pumps

Nismoid and I wouldn't have posted if we didn't have actual figures in mind.

These aren't just theoretical estimates. I gave him the ability to work it out for himself. Maybe he is going to purchase injectors and needs to know so he can decide whether or not to go for larger or smaller items.

Out of the many cars I have fitted 700cc injectors to, only 3 have ever really 'pushed close to the limit'. 420rwkw roughly for all with more room to move... none were running standard rail pressure or standard fuel pumps

Nismoid and I wouldn't have posted if we didn't have actual figures in mind.

You and Nismopid are tight aye Dan. :D

These aren't just theoretical estimates. I gave him the ability to work it out for himself. Maybe he is going to purchase injectors and needs to know so he can decide whether or not to go for larger or smaller items.

Out of the many cars I have fitted 700cc injectors to, only 3 have ever really 'pushed close to the limit'. 420rwkw roughly for all with more room to move... none were running standard rail pressure or standard fuel pumps

Nismoid and I wouldn't have posted if we didn't have actual figures in mind.

Wasn't supposed to come across as having a go, was just curious to see what figures people have seen on the dyno. 650rwhp is a nice figure, but I've never seen 700's do that before (personally, not saying it isn't possible).

At 403wkw we were at 97% duty, so basically maxxed, but will be pushing the fuel pressure up a bit more this time, think the single nismo pump was letting it down.

Wasn't supposed to come across as having a go, was just curious to see what figures people have seen on the dyno. 650rwhp is a nice figure, but I've never seen 700's do that before (personally, not saying it isn't possible).

At 403wkw we were at 97% duty, so basically maxxed, but will be pushing the fuel pressure up a bit more this time, think the single nismo pump was letting it down.

Yeah, the fuel pump could be starting to let you down. If you have the 245L/hr Nismo pump, they are good for up to around 600whp I think. CBF doing the calculations right now but yeah, I think I worked out that the bigger GTR pump (265L/hr??) is good for up to around 750hp or so.

You may find that if you increase the pump size, your duty cycle will decrease. Or you could try increasing the fuel line size.

What size fuel line are you running?

Yeah, the fuel pump could be starting to let you down. If you have the 245L/hr Nismo pump, they are good for up to around 600whp I think. CBF doing the calculations right now but yeah, I think I worked out that the bigger GTR pump (265L/hr??) is good for up to around 750hp or so.

You may find that if you increase the pump size, your duty cycle will decrease. Or you could try increasing the fuel line size.

What size fuel line are you running?

GTR nismo pump flows 276L per hour. with the stock/nismo wiring. and with good power feed with flow every mil of that if not more.

a set of 6 700cc injectors can flow 252 L per hour at 100% open. so in my eyes nismo GTR pump is the perfect match for 700cc injectors. it should be just able to oversupply them.

edit: I've run nismo GTR pumps in a number of my cars, with stock 440 njectors, 600cc injectors and the sard 700cc inejctors. no problems with any of those set-ups, but never really stretched any of those systems.

Can anyone give actual figures for injectors they've used instead of just theoretical estimates? I will be pushing the limits of 700cc injectors very shortly.

So far they've done 403wkw with standard fuel pressure on 98 ron.

poo poo did 627rwhp on 700cc injectors

single 044 in tank, i think fuel pressure was 3 bar or whatever standard is

i wouldnt think ur going to push the limits of them with a gt35r :D

GTR nismo pump flows 276L per hour. with the stock/nismo wiring. and with good power feed with flow every mil of that if not more.

a set of 6 700cc injectors can flow 252 L per hour at 100% open. so in my eyes nismo GTR pump is the perfect match for 700cc injectors. it should be just able to oversupply them.

edit: I've run nismo GTR pumps in a number of my cars, with stock 440 njectors, 600cc injectors and the sard 700cc inejctors. no problems with any of those set-ups, but never really stretched any of those systems.

remember that a nismo pump flows 276l/hr at a specific pressure (i think around 3 bar), when you increase the pressure with boost (say 1.5 bar) it actually flows less than that...

all pumps are rated at a particular quoted pressure. at least the nismo one is quoted at the actual base pressure of a modern EFI system. 3 bar. sure pumps flow changes with pressure (they will increase to a point, then hold, then drop and some like walbro's will drop drastically at a given pressure).

all skyline systems run a 3 bar system + boost. I haven't seen a nismo pump @ base + 1.5 bar be unable to supply 6 X 700cc injectors at around 90% duty. They are designed for boosted EFI applications so they do handle pressure a lot better than some pumps that are designed for high flow, low pressure systems. which is where people get caught out.

when you say it flows less than 276l/ph @ base + 1.5bar, how much less does it flow? I'd be keen to know what you found as I'm running one in the new car too. and in my previous experience it doesn't flow less than quoted.

GTR nismo pump flows 276L per hour. with the stock/nismo wiring. and with good power feed with flow every mil of that if not more.

a set of 6 700cc injectors can flow 252 L per hour at 100% open. so in my eyes nismo GTR pump is the perfect match for 700cc injectors. it should be just able to oversupply them.

edit: I've run nismo GTR pumps in a number of my cars, with stock 440 njectors, 600cc injectors and the sard 700cc inejctors. no problems with any of those set-ups, but never really stretched any of those systems.

Yeah, I think Power Enterprise and HKS rate them at 265, Nismo rate them at 276. I always like to stay ont he lower side.

With what Cerbera is saying, the flow charts for that pump are:

post-10554-1241683893_thumb.jpg

And yeah +1 on the GTR version being a perfect match for 700cc's

I have nismo fuel pump, and 800cc injector. run 1.28bar, make 312kws on all 4. the tuner told me this is the limit of this fuel pump. if go up boost, the afr will leaning out. now the afr is between 11.5-12 which is safe. but my injector duty only about 70%. tuner suggest me replace a fuel pump or surge tank setup.

does that mean my nismo fuel pump failure? or it was really tue limit of nismo fuel pump.

my car is gtr 34.

I have nismo fuel pump, and 800cc injector. run 1.28bar, make 312kws on all 4. the tuner told me this is the limit of this fuel pump. if go up boost, the afr will leaning out. now the afr is between 11.5-12 which is safe. but my injector duty only about 70%. tuner suggest me replace a fuel pump or surge tank setup.

does that mean my nismo fuel pump failure? or it was really tue limit of nismo fuel pump.

my car is gtr 34.

Is your pump still on the FPCM circuit? because what FPCM does is vary the ground in order to vary

the available current to the pump, so that at low RPM the pump isn't working very hard.

This works great with stock but at higher boost and injector

and fuel rail pressures, the pump draws more current. When it starts to need more than the FPCM

can deliver, the car will lean right out, the measured voltage over the pump will suddenly dip..

if you direct wire the pump to the alternator, it'll get 14v, not variable power, and do the best it is

ever going to do.. it'll also be one less point of failure..

Racepace told me this week that the stock GTR pump is good till over 400kw, when hardwired.

He also said they have been unable to pick any significant difference between the nismo pump and

the stock pump, the suggestion being that if the stock pump isn't good enough, you're going to need

a more elaborate fuel setup rather than just fixing it with a nismo pump.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...