Jump to content
SAU Community

Recommended Posts

You should be able to do this your self.

Maguire’s all metal polish works well and they come up like new again.

Just be aware they will need to be done regularly as it removes the protective film, but it's definately worth doing.

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4585917
Share on other sites

on my old Gt-t the the build up was actually on the inside of the headlights, I was the first owner is aus and when I bought it it didn't have that

My guess was it had something to do with when the compliancer took out the factory xenons it ruined the seals and let the haze gradually build up over time.

Was going to open up my headlights using the DIY on here somewhere then clean the inside but I sold the car anyway

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4585930
Share on other sites

The only way you'd stop it coming back is to have some sort of protective film re applied professionly.

Don't know if this is possible or not.

why bother.... $20 for the bottle that will last you at least 20 cars life spans and 2 mins of your time every 6 months is fine...... recon that would be cheaper and just as effective....... plus you get the feeling of making something ugly become beautiful again lol

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4586280
Share on other sites

anyone know if you can get glass covers for the 33/34's instead of the plastic jap specs? mine look clear untill i turn the lights on. i've heard you can spray clear coat on them and it stops them from oxidizing, makes sense but haven't seen it done to confirm it.

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4586305
Share on other sites

You should be able to do this your self.

Maguire's all metal polish works well and they come up like new again.

Just be aware they will need to be done regularly as it removes the protective film, but it's definately worth doing.

Metal polish????? should use plastX instead then lol....

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4587939
Share on other sites

When I polished my headlights I started with some 1200 grit wet and dry abrasive paper, moved onto 2000 grit then finished with Maguire's StratchX. Probably spent a good 45 mins per headlight, but 18 months later they only show a slight yellow tinge :D

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4588342
Share on other sites

Couldn't agree more, any fine cut abrasive will do a good job, including toothpaste, autosol metal polish is what I use cos I found some in my shed.

It's quicker to start with 2000 grit wet/dry paper, soaked in water for half an hour, then rubbed over avoiding the surrounding paintwork. When it looks like shite, hit it with the finest cut polish you can and plenty of elbow grease and marvel at the results! I've done mine 3 times in 5 or so years of ownership.

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4597438
Share on other sites

  • 1 month later...

http://www.gtglass.com.au/HeadlightRepairs.htm

I booked in with these guys for tomorrow, will let you know how it goes!! $70 a headlight sounds a bit pricey I know, but mines coming from both outside and inside, and I'm getting desperate

(P.S. I have done the sand down + polish technique a couple of times since last year and it keeps coming back (maybe it is due to the fact it lives outside)

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4685152
Share on other sites

$140 is cheap considering the whole front bar has to come off to take the headlights out of the car and also taking the lense off is a major pain in the ass (needs to be over baked or use a heatgun)...but NOT CHEAP at all if he's only gonna sand/machine polish the outside of the lens (which is the most likely scenario). Let us know how it goes .. these guys have franchisees everywhere it seems

Edited by Delta Force
Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4685584
Share on other sites

Hey guys,

This was done yesterday and overall I'm pretty pleased with the result. The outside of the headlights are almost perfect (the surface is now smoother than the finish on my car) although the inside wasn't done which mean there are some very feint cracks even more visable now that the outside is crystal clear.

With the headlights on at night there isn't any more cloudy dirty appearance from the plastic so I won't bother getting them opened up anymore.

Photo's attached but I don't have any before shots :sick:

Link to comment
https://www.sau.com.au/forums/topic/269352-r34-headlights/#findComment-4688922
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...