Jump to content
SAU Community

Recommended Posts

Hey guys,

I have done a search and nothing really has come up. I want to fit a slightly bigger cooler into my car, now I don’t want to go big aftermarket as I’m not a fan of the look. ( I am considering using a matt black spray can to help J)

I would like to get some insight if a gtr cooler will be a straight fit and how much bigger/ thicker it wil be?

I have also considered getting an r34 cooler too?

I only really want to be pushing 10-12psi through it, but not too keen on using aftermarket one. What is the easiest/ best option.

Plus I want to keep the pod, so I guess a stock cooler would make it leagal :D

Btw its an r33t.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/
Share on other sites

Pretty sure the R33 and R34 coolers can handle it. I think people just upgrade due to the lower cooling efficency at that boost level. R34 cooler should be alright for 12psi through a stock turbo

Edited by Boostin96
Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4594499
Share on other sites

I used a R34 SMIC on my R33 and noticed the difference straight away. Was a direct swap which was very easy to do, plus didn’t have to cut anything off the car. Seemed to rev out a lot easier and was more responsive. If you don’t want a FMIC and only aiming to do the usual mods with 10psi or 12psi, then the R34 SMIC is perfect.

Although Im running a FMIC on my R33 now and it feels even better. Kind of feels like more torque. I was very happy! :D

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4594524
Share on other sites

Running an R34 SMIC will work - However, once the power bug hits you, it will hit hard - and then you will regret not getting a fmic in the first place.

I believe the GTR coolers are more pricey then a aftermarket fmic kit.

The issue with those smic's is heat soak, and LOTS and LOTS of it.

If you can get an R34 smic for dirt cheap(40-50) then sounds ok, otherwise save the money and get a fmic and just paint it black.

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4594585
Share on other sites

r34 SMIC is a straight fit so its a piece of piss to do. Good for 200KW ATW but constant runs see a drop in power. Heatsoak. I havent installed a FMIC for the same reason. That and id rather not hack the shit out of my car to make it fit...

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4594941
Share on other sites

r34 smic on a r33 will handle 200rwkw easy...

but if you want something a little better and still stealthy, get yourself a r34 ARC SMIC..

harder to find, but worth it,,, they flow nearly as a front mount does without the heatsoak or the r34 smic...

or at least that has been the experience with the ARC cooler on my 33...

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4595205
Share on other sites

guys can u explain heatsoak concept i'm not gonna pretend that i understand it. I'm not gonna boost it past 10-12 aka 200 rwkw. So i think that an r34 cooler would be alright?

a) don't wanna cut up all the crap cause makes the car look mega cheap

b) the cooler look doesn't float my boat- Considering getting and aftermarket one and spraying it matt black.

But i reckon that a nissan cooler should be good, like some of the aftermarket crap floating around is pretty bad. The other think i was gonna ask, how does the stock ecu handle 10psi cause i took my blow off value (lol yer i don't like the cooler look haha) cause it was backfiring, skylines are just tuned really good stock i concluded plus the stututututu was too much attention lol

Edited by P1OTR
Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4595297
Share on other sites

  • 2 months later...

Heat soak occurs when the intercooler can't shed the heat that it removes from the compressed air of the turbo. On a hot day, the intercooler can, like a sponge, become "soaked" with heat and lose its effectiveness.

Heat soak is one of the major reasons that turbocharged cars tend to run slower when the weather is warm.

Common solutions to improve heat soak is the use of a higher-capacity intercooler, or one that's mounted more in-line with the air flow, as in front-mount intercoolers.

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4768033
Share on other sites

before you even consider doing a replacement SMIC please read in full detail;

http://www.skylinesaustralia.com/forums/R3...40&start=40

http://www.skylinesaustralia.com/forums/R3...tml&hl=smic

http://www.skylinesaustralia.com/forums/Up...tml&hl=smic

i would go straight for the GTR intercooler its perfect and a factory item

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4768468
Share on other sites

if it is only for street use and you don't drive that hard the r34 cooler will do the job. if you plan on going to track days at all then don't bother with the r34 cooler. it will suffer from heat soak extemely quickly which results in more chance of pinging and less power.

Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4768887
Share on other sites

before you even consider doing a replacement SMIC please read in full detail;

http://www.skylinesaustralia.com/forums/R3...40&start=40

http://www.skylinesaustralia.com/forums/R3...tml&hl=smic

http://www.skylinesaustralia.com/forums/Up...tml&hl=smic

i would go straight for the GTR intercooler its perfect and a factory item

As the OP was last heard of in May one presumes he has already made a choice but for the record I have read all three of the above links and I am still not convinced that the R34 smic is not a good choice for someone with a stock turbo. If you do repeated runs on a dyno with none of the fan air directed through the side vent then I am sure that the SMIC will get hot but I have used a trust smic on the track (around 200awkw) and when I pull in the inlet pipe (coming out of the intercooler) is cold. I am now running 16psi with a GCG highflow (around 220 -230awkw - will dyno again soon) and have a Nismo smic which is not much bigger than the R34 and it is now probably marginal. I am looking for an ARC smic and that will do me. I have slightly enlarged the vent and have made sure that the shroud directs all of the air that comes through the vent through the smic core. At this level and above I am sure that there will be benefits from a front mount but I don't want one. But with the standard turbo an R34 smic will definitely be adequate - you can pick them up here for $50 - $80 and there is no installation cost and no attention from the cops.
Link to comment
https://www.sau.com.au/forums/topic/270004-stock-cooler/#findComment-4769592
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...