Jump to content
SAU Community

Recommended Posts

Maybe a newbie question but a search didn't turn up anything useful:

How do you change the oarking light globe? I had a dig around and it looks as though I either have to pull off the whole front bar or pull out the plastic guard liner just to get at the globe holder? Is there an easier way?

Link to comment
https://www.sau.com.au/forums/topic/271314-stagea-m35-parkers/
Share on other sites

short answer. No. :D

I did it through the wheel arch and removed the liners.

I think you could also do it by removing the airbox on the passanger side and the removing the washer bottle on the drivers.

Oh, and make sure your hands are flexible..... Good luck

Cheers

Andy

i did a whole HID conversion without removing the front bar or wheel liners :D

yes i have flexible hands. and i remove the airbox/afm and moved the overflow bottle

seriously?! I don't even have the airbox and i reckon i'd struggle toget my fingers in there.

Just pop out those plastic fasteners towards the front of the wheel arch and unscrew the screw that is at about 9-10 o'clock (if looking at the wheel arch as a clock face).

Pull the arch liner away enough to get your hand in there.

Feel around for the parker connector (helps to look for it first to get a general idea), turn anti-clockwise and pull out.

Chuck in your LED with wedge connection (T10?), do everything up.

Should take ~10mins all up.

  • 2 weeks later...
Just pop out those plastic fasteners towards the front of the wheel arch and unscrew the screw that is at about 9-10 o'clock (if looking at the wheel arch as a clock face).

Pull the arch liner away enough to get your hand in there.

Feel around for the parker connector (helps to look for it first to get a general idea), turn anti-clockwise and pull out.

Chuck in your LED with wedge connection (T10?), do everything up.

Should take ~10mins all up.

wish i had seen this post earlier today! I f@*#ed around for 1/2 hour this arvo, pulled the plastic fastener out, spent fruitless minutes trying to feel/get to the parker, failed.

pulled the bolt off the headlight assembly, couldn't remove it, tried to get my hand in, failed.

went back to liner, turned wheel full lock to get it out of the way, thought I could feel the light (hadn't removed said screw cause didn't know it F@*$ing existed), turned, failed.

Gave up, went inside to have a drink! :ninja:

wish i had seen this post earlier today! I f@*#ed around for 1/2 hour this arvo, pulled the plastic fastener out, spent fruitless minutes trying to feel/get to the parker, failed.

pulled the bolt off the headlight assembly, couldn't remove it, tried to get my hand in, failed.

went back to liner, turned wheel full lock to get it out of the way, thought I could feel the light (hadn't removed said screw cause didn't know it F@*$ing existed), turned, failed.

Gave up, went inside to have a drink! :)

NOT happy Jan!! :woot:

  • 8 months later...

Well that was fun... not.....

LED lights now installed and looking closer in colour to the HID headlamps... Took about 30 minutes to do both, but have removed skin on both hands...

but if the bulbs blow, they ain't coming out...

This is not a job for 6'4" people with large hands...

Maybe a newbie question but a search didn't turn up anything useful:

How do you change the oarking light globe? I had a dig around and it looks as though I either have to pull off the whole front bar or pull out the plastic guard liner just to get at the globe holder? Is there an easier way?

I found the easiest way to the back of the light unit is to use an hacksaw blade and cut away the f/glass moulding which blocks you getting your hand down to the lights. It doesn,t destoy the structural integretity of the moulding and certainly stops a lot of swearing, just saw between the excisting holes and clean up the edges with a file, makes life oh so easy.

enough time has passed so I might try again. I'll happily take a hacksaw to the b%$*dard.

Are you sure you don't want to leave it for another 7 months? :P

No real need for hacksaws mate (a bit dramatic IMO :down: )

It helps to look in fro the top but to reach in from the side (if your arms are long enough)

Edited by iamhe77

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...