Jump to content
SAU Community

Recommended Posts

Maybe a newbie question but a search didn't turn up anything useful:

How do you change the oarking light globe? I had a dig around and it looks as though I either have to pull off the whole front bar or pull out the plastic guard liner just to get at the globe holder? Is there an easier way?

Link to comment
https://www.sau.com.au/forums/topic/271314-stagea-m35-parkers/
Share on other sites

short answer. No. :D

I did it through the wheel arch and removed the liners.

I think you could also do it by removing the airbox on the passanger side and the removing the washer bottle on the drivers.

Oh, and make sure your hands are flexible..... Good luck

Cheers

Andy

i did a whole HID conversion without removing the front bar or wheel liners :D

yes i have flexible hands. and i remove the airbox/afm and moved the overflow bottle

seriously?! I don't even have the airbox and i reckon i'd struggle toget my fingers in there.

Just pop out those plastic fasteners towards the front of the wheel arch and unscrew the screw that is at about 9-10 o'clock (if looking at the wheel arch as a clock face).

Pull the arch liner away enough to get your hand in there.

Feel around for the parker connector (helps to look for it first to get a general idea), turn anti-clockwise and pull out.

Chuck in your LED with wedge connection (T10?), do everything up.

Should take ~10mins all up.

  • 2 weeks later...
Just pop out those plastic fasteners towards the front of the wheel arch and unscrew the screw that is at about 9-10 o'clock (if looking at the wheel arch as a clock face).

Pull the arch liner away enough to get your hand in there.

Feel around for the parker connector (helps to look for it first to get a general idea), turn anti-clockwise and pull out.

Chuck in your LED with wedge connection (T10?), do everything up.

Should take ~10mins all up.

wish i had seen this post earlier today! I f@*#ed around for 1/2 hour this arvo, pulled the plastic fastener out, spent fruitless minutes trying to feel/get to the parker, failed.

pulled the bolt off the headlight assembly, couldn't remove it, tried to get my hand in, failed.

went back to liner, turned wheel full lock to get it out of the way, thought I could feel the light (hadn't removed said screw cause didn't know it F@*$ing existed), turned, failed.

Gave up, went inside to have a drink! :ninja:

wish i had seen this post earlier today! I f@*#ed around for 1/2 hour this arvo, pulled the plastic fastener out, spent fruitless minutes trying to feel/get to the parker, failed.

pulled the bolt off the headlight assembly, couldn't remove it, tried to get my hand in, failed.

went back to liner, turned wheel full lock to get it out of the way, thought I could feel the light (hadn't removed said screw cause didn't know it F@*$ing existed), turned, failed.

Gave up, went inside to have a drink! :)

NOT happy Jan!! :woot:

  • 8 months later...

Well that was fun... not.....

LED lights now installed and looking closer in colour to the HID headlamps... Took about 30 minutes to do both, but have removed skin on both hands...

but if the bulbs blow, they ain't coming out...

This is not a job for 6'4" people with large hands...

Maybe a newbie question but a search didn't turn up anything useful:

How do you change the oarking light globe? I had a dig around and it looks as though I either have to pull off the whole front bar or pull out the plastic guard liner just to get at the globe holder? Is there an easier way?

I found the easiest way to the back of the light unit is to use an hacksaw blade and cut away the f/glass moulding which blocks you getting your hand down to the lights. It doesn,t destoy the structural integretity of the moulding and certainly stops a lot of swearing, just saw between the excisting holes and clean up the edges with a file, makes life oh so easy.

enough time has passed so I might try again. I'll happily take a hacksaw to the b%$*dard.

Are you sure you don't want to leave it for another 7 months? :P

No real need for hacksaws mate (a bit dramatic IMO :down: )

It helps to look in fro the top but to reach in from the side (if your arms are long enough)

Edited by iamhe77

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...