Jump to content
SAU Community

Recommended Posts

Thought I'd throw them up tonight... if you want your plate fuzzed let me know and I'll think about it! :) (Luke I'll send you the vid somehow)

sau_group_1_1200x900.jpg

High Res 3264 x 2448

sau_group_2_1200x900.jpg

High Res 3264 x 2448

sau_group_3_1200x900.jpg

High Res 3264 x 2448

heslo_1_1200x900.jpg

High Res 3264 x 2448

heslo_helslo_1200x900.jpg

High Res 3264 x 2448 ^^^ Gotta love these 2 plates together

s880aci_1200x900.jpg

High Res 3264 x 2448

hostile_1200x900.jpg

High Res 3264 x 2448

scandy_1_1200x900.jpg

High Res 3264 x 2448

writeoff_1200x900.jpg

High Res 3264 x 2448

Edited by 32godzilla
  • Replies 383
  • Created
  • Last Reply

Top Posters In This Topic

Here are some pics I manage to grab...

Meeting up for the morning before heading to Mallala

P1040059.JPG

Parked at Malala

P1040060.JPG

The TYPEVU and HESLO awesomeness

P1040064.JPG

The class

P1040065.JPG

The casualty and the mechanic

P1040068.JPG

Didnt get any on-track photos with my camera though...

best part of the day, vu spinning on the warm down lap! :)

Oh and thanks for the pie Dave... PS... Eliza is hot

f**ker.

is that what her name is? cant say i was paying much attention to her name...

Just came on here to add a special mention to our super-mod Andrew the Nightcrawler. Had only a few hours sleep, from what I gather he drove well and then played mechanic for David's R33 GTR at the end of the day as seen in Vu's last pic above. Made sure no-one was left behind. Top effort mate. :)

And Vu - powersliding usually occurs at speeds above 20kmph. It was the final lap and was for a warm down. Failing to keep your car on the black stuff at that point in time IS a fail. ;) (But nice pics)

Thanks Kim for organising the day and letting me tag along ;) it was fun, though I don't think I fully pushed my car to it's limits as I kept freaking out with the thought I wasn't covered under my insurance lol (grrr)

did anyone manage to take pics of the s15?

Please post or email to kandykane_AThotmailDOTcom

thanks!!

Yeah thanks Kim - definately an enjoyable day. Good to meet a lot you finally, with the only familar face being Andrews (from back in 03/04). As with Luke I learnt a hell of a lot and was very happy with how my car went considering the extra weight. Will definately be there in November. Gotta love the many handbrake attempts... I think Luke won that contest, followed closely by krishy - pretty good guys!! I'll post some pics up tomorrow - is anyone precious about their number plates?? If so speak out. :) Oh and still bummed HESLO got 168km/h max speed, beat me by 2km/h - bastard!! ;)

I managed to crank up to 170 when we were doing those laps towards the end of the day.....it was so much fun, also learnt a lot about driving techniques and also VISION.....car worked a treat till the end of the day started to get the "long brake pedal" freaked me out a bit but then 2 cool down laps did the trick.....next is some EBC RED STUFF i reackon.....to stop the "long brake pedal" happening again....it was awesome as Lukey (ENR) started the handbrake u turns followed by me and pretty much the rest of the group lol....oh and VU learn how to make handbrake u turns and not end up on the grass all the time....

Josh did some nice tractor work in his 33 GTR....cannot wait for the next performance day

And Vu - powersliding usually occurs at speeds above 20kmph. It was the final lap and was for a warm down. Failing to keep your car on the black stuff at that point in time IS a fail. :) (But nice pics)

Who said I was under 20km/h? Pretty sure the car is warmed down enough already when I'm like freezing my tits off ;)

oh and VU learn how to make handbrake u turns and not end up on the grass all the time....

Handbrake is softcock shit... learn how to drop the clutch and do mad skids and ending up where your not suppose to be.

Hey Krishy - if it's not on the power FC memory then it doesn't count!! :( Just jokes mate - your car is suprisingly quick for a GTS-T. :)

Thanks mate....i was suprised by the handling of the 260 as well mate...specially during the slalom

Who said I was under 20km/h? Pretty sure the car is warmed down enough already when I'm like freezing my tits off ;)

Handbrake is softcock shit... learn how to drop the clutch and do mad skids and ending up where your not suppose to be.

No TRYING to drop the clutch to whip the back end around and ending up 10-15 meters off the track and into the grass is softcock shit + Epic Fail......i think a lot of people who tried the handbrake u turn found it a bit difficult to start with but got it towards the end of the day.....cheers to lukey for starting it lol

I managed to crank up to 170 when we were doing those laps towards the end of the day.....

I managed to top out at 164km/h with my 200kw (boost set to 12psi).

My brake pedal was consistant all day, even after the 6 laps at the end of the day. I'm running RDA slotted discs up front with QFM A1RM pads and some unique autosports front brake air deflectors, nismo crossdrilled discs on the rear with genuine nissan pads and BMW dot4 fluid in the system (barely a week or 2 old), also have a Cusco brake cylinder master stopper as well.

No TRYING to drop the clutch to whip the back end around and ending up 10-15 meters off the track and into the grass is softcock shit + Epic Fail......i think a lot of people who tried the handbrake u turn found it a bit difficult to start with but got it towards the end of the day.....cheers to lukey for starting it lol

Epic failed are those f**king tossbag f**king wankstains f**king criticizing how I want to f**king drive on a f**king race track where your meant to f**king learn how the car behaves and learn driving techniques and shit and have a f**kING FUN TIME aswell.

f**king.

Epic failed are those f**king tossbag f**king wankstains f**king criticizing how I want to f**king drive on a f**king race track where your meant to f**king learn how the car behaves and learn driving techniques and shit and have a f**kING FUN TIME aswell.

f**king.

ahaha thats pretty funny to read :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...