Jump to content
SAU Community

Recommended Posts

I have been told how many k's a car has done is a very poor judge of the condition of the car as it is common for odometres to be tampered with or replaced. It is illegal but if it was a professional job can anyone tell without taking the panel apart (you are not allowed to do this at the auctions). Are their any quick non intrusive tests you can do apart from having suspicions.

Service books? Alot of cars are listed on auctions as having their service books missing where stamps from the dealer show the car has been regularly serviced. I was wondering if this is a big negative as it might be if it was in australia. Should we view this as a cynical attempt to conceal potential problems with the car.

"Stop and Start Driving is bad for the car" I was told alot of japanese cars are driven in congested areas and as a result they have to stop and start frequently. This is a big negative for the engine. Can someone tell me why it is a negative? Given that Japan is very congested wouldn't this mean most cars suffer from this problem. Does this mean engines are likely to fail much earlier then Australian cars which have longer distances to travel. (My friend told me this and warned me against importing a japanese car) So really a engine which has done 50,000km in stop start driving conditions would be in worse condition then my friends Nissan Navara which has done 200,000km mostly doing country driving as he works on a farm.

Thanks for your shedding any light on these issues

Link to comment
https://www.sau.com.au/forums/topic/273249-odo-tampering-is-rampant-in-japan/
Share on other sites

Odometer tampering is far, far less common than it used to be. Recently in Japan new laws were institured that meant every 2 years when a car is registered (and undergoes a roadworthiness inspection) the mileage is now recorded along with the official registration paperwork. This means that if a car has 60,000km and the registration paperwork says 2 years ago it had done 90,000km then you know there's a problem. As such, theoretically the worsed someone could do was windback 2 years worth of driving without anybody knowing.

There are also all sorts of other ways to know if mileage is sus' and anyone who is honest and knows what they are doing will pick them up straight away, the somple and most obvious being if the condition of the car doesn't match the mileage. What use is a car with 50,000km on the clock when it doesn't look like a 50,000km car? Service books in Japan are not as common as in Australia, Japanese people simpy tend not to hang on to the paperwork since they don't think it's important.

In regards to stop-start driving this can be bad because this kind of driving puts higher wear on a vehicle than just cruising at a steady pace at say 100kph, which is relatively unstressful for an engine and many components. Do Japanese cars do a lot of stop start driving? Just like Australia it depends who owns them. Some people in Japan do practically nothing but highway driving, I certainly know from personal experience if I want to get someone within the city here in Tokyo public transport is heaps chepaer and easier, and a lot of people feel the same so they don't use their car for that kind of thing. When it comes to modern engines (maybe some people will disagree) I'd rather have one that's done 50,000km of start start driving versus 200,000km of 'normal' driviing, and as I described I actually don't think that's often the case anyway.

Odometer tampering is far, far less common than it used to be. Recently in Japan new laws were institured that meant every 2 years when a car is registered (and undergoes a roadworthiness inspection) the mileage is now recorded along with the official registration paperwork. This means that if a car has 60,000km and the registration paperwork says 2 years ago it had done 90,000km then you know there's a problem. As such, theoretically the worsed someone could do was windback 2 years worth of driving without anybody knowing.

There are also all sorts of other ways to know if mileage is sus' and anyone who is honest and knows what they are doing will pick them up straight away, the somple and most obvious being if the condition of the car doesn't match the mileage. What use is a car with 50,000km on the clock when it doesn't look like a 50,000km car? Service books in Japan are not as common as in Australia, Japanese people simpy tend not to hang on to the paperwork since they don't think it's important.

In regards to stop-start driving this can be bad because this kind of driving puts higher wear on a vehicle than just cruising at a steady pace at say 100kph, which is relatively unstressful for an engine and many components. Do Japanese cars do a lot of stop start driving? Just like Australia it depends who owns them. Some people in Japan do practically nothing but highway driving, I certainly know from personal experience if I want to get someone within the city here in Tokyo public transport is heaps chepaer and easier, and a lot of people feel the same so they don't use their car for that kind of thing. When it comes to modern engines (maybe some people will disagree) I'd rather have one that's done 50,000km of start start driving versus 200,000km of 'normal' driviing, and as I described I actually don't think that's often the case anyway.

Very well said, I agree totally. Whenever I drive in Japan, I spend more time on the freeways at 100km/h (ok maybe a TOUCH over that hehe) than I do stuck in traffic.

  • 1 month later...
Recently in Japan new laws were institured that meant every 2 years when a car is registered (and undergoes a roadworthiness inspection) the mileage is now recorded along with the official registration paperwork. This means that if a car has 60,000km and the registration paperwork says 2 years ago it had done 90,000km then you know there's a problem.

Certainly sounds like good way to counter odo tampering but what if people decides to clock back the mileage just before registeration time? it's a possibility because i know for a fact that there are user-friendly tools that are commonly used by individuals in asia. in mainland china and taiwan. i think they call it "mileage correction tools". with modern odos being digital. i'd think one could easily edit mileage with access.

As for the condition of the age. i'd think owners who are serious about preserving the low mileage would put great effort into doing so. older parts can always be replaced with new.

But i can totally understand the logic of what your saying. it's just weird to me that the "common" and "famous" jap imports always seem to have ridiculously low mileage and the uncommon ones tend to have a much higher.

Edited by Mingy
  • 4 weeks later...

They're often wound back here also. I found the original ad for my car in Japan and it had 44,000 would out of it prior to compliance in Australia. :banana: The previous owner (who imported it) certainly told a few fibs. So it's not entirely fair to say it's all Japan, the grey factor often provides a cover for poor behaviour in Australia.

dishonest

fraudulent

deceitful

greedy

out of sight - out of mind

ignorant to other people's woes

disrespectful

taking advantage of even discriminating people as well as the gullible

sorry! just trying to put myself into the head of a scammer...

It also gives, particularly R32s, a bad name for the engine being weaker. Often in reality the kms travelled are often far higher.

Obviously there are still some exceptional cases where the car has genuine low kms, these are more common in Japan than Australia. So I'm not referring to all cars.

  • 2 weeks later...

http://www.japanpowerinc.com/car_details/1...SAN_SKYLINE_GTR

Tidy car - says 201,000kms. In Australia they would probably wipe 100,000kms off that. Also interesting is the condition, tidy car even in the engine bay. Hence the cars here don't get enough credit for their actual durability.

It seems that the Canadian importers are more honest than their Australian equivalents.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...