Jump to content
SAU Community

Recommended Posts

  • Replies 245
  • Created
  • Last Reply

Top Posters In This Topic

LOL

So.....how do you find time to work on all these vehicles??

I mean...what if I was to ask you to build me a motor, when you going to find the time?? LOL

Mate i'd love a steer but i'd be too scared!

Will be good to catch up on friday mate!

and still cant wait to see the new project/keep following it, sounds awesome!

I dunno where the time comes from. I work all day and then end up stuffing around with other stuff when I get home.

I don't really build any engines anymore, I sublet all the machining to the one person I trust and I only do the final assembly after its been checked and pre-assembled. Duncan's are a love job, and its easy cause the sealer lives over the hill from me.

Its actually not that scary to drive. The biggest thing is maintaining corner speed and the acceleration when you mash the throttle can be daunting at first. We have worn the transfer case out so its currently a RWD POS. Its alot harder to drive atm but besides the wheel spin its okay.

Friday after the track day your welcome to drop past home and have alook at it, should be totally gutted and stripped down by then.

Yea I'm out of the S13 as well,,,he's sending me pics,,,but just the seat cut outs turn me off,,,Oh well I'll keep looking,,,no way am I building from scratch.

I don't have your access to plasma cutters and the like at the moment young Brad,,,but it will happen.

I'm after another Sporty but after the Capri it has to be a Nissan with Nissan power.

At least now the Sports Sedan guy's have a half desent web site to interact.

Neil.

The photos are not great Neil.

chassis/engine mounting/position/diff etc etc its all pretty much "home grown"

Duncan and I were talking about it again today.

Take a close look when you get photos at the wishbone design. We'll discus it off air!

Plus its Chromolly tube frame. Everyone knows how much of a head f**k chromolly chassis are when they age and start cracking.

Id rather the engine mounted so you dont have to cut the seat which was my comment previously about mounting the engine the right way. He'll also send you a inventory which clearly says ASTRON turbo not RB25.

The photos are not great Neil.

chassis/engine mounting/position/diff etc etc its all pretty much "home grown"

Duncan and I were talking about it again today.

Take a close look when you get photos at the wishbone design. We'll discus it off air!

Plus its Chromolly tube frame. Everyone knows how much of a head f**k chromolly chassis are when they age and start cracking.

Id rather the engine mounted so you dont have to cut the seat which was my comment previously about mounting the engine the right way. He'll also send you a inventory which clearly says ASTRON turbo not RB25.

Mate you can also mount the engine off to one side of the chassis and angle the tailshaft...

I also looked at the s13 some of the designing was below standard , he had to change to the astron because the rb in the end wouldn't physically fit.

Thats exactly what I plan to do with this car. Ill mount the engine as low as possible with the dry sump pan and angle the tail shaft as little as possible to make it work the way it should.

I mentioned earlier that to fit an RB into that chassis it would need to be cut up and it wasn't worth it.

Glad someone looks along the same lines i do and seen the flaws as well before saying its a bargain with an RB fitted.

It looks like they have built the chassis and tried to make an engine fit instead of building the chassis to suit the engine.

Yea I'm out of the S13 as well,,,he's sending me pics,,,but just the seat cut outs turn me off,,,Oh well I'll keep looking,,,no way am I building from scratch.

I don't have your access to plasma cutters and the like at the moment young Brad,,,but it will happen.

I'm after another Sporty but after the Capri it has to be a Nissan with Nissan power.

At least now the Sports Sedan guy's have a half desent web site to interact.

Neil.

Neil what sort of sports sedan are you after?

Im building 2 sports sedans at the moment, one car has the engine completely off to one side of the car the other has the engine mooved over 100mm

btw its profi from the sports sedan forum...

Edited by Riverside Racing Parts

From my measurements I should get away with moving the inline 6 across about 200-240mm so I shouldnt have any problems. The inlet manifold of the RB is the killer but something interesting has been designed for that.

Not sure how far back to go yet, Was contemplating leaving the front two cylinders in the engine bay which is well behind the front axle.

I did think it was you Liam.

We started building ours and had to pull the engines forward, they were going to end up too rear heavy.

one of our cars has an sr and the front of the engine is level with the firewall/base of windscreen...

if you want some pics pm me your email address..

Edited by Riverside Racing Parts

That was my thought with the weight issue. Sounds like Im on the right track leaving two cylinders poking out the front then.

Obviously it will be weighted before final mounting.

The idea of just pulling the engine forward is so good! None of this worrying about front drive shaft angles and rubbish I've had before.

Neil what sort of sports sedan are you after?

My wish list is:-

Aussie spec Gazelle coupe

R33 GTS-T,,,no you lot I am not cutting up the wifey's car!!!.

S13/S14

OR

Really left field a

Morris Marina coupe with RB30 power,,,when I was a kid my dad took me to Warrick Farm and one of these was running a V8 chev,,,I fell in love with it. I have a pic somewhere taken with my instermatic poloriod camera. Shit I'm an old bastard.

Oh while waiting for the train home I'll never forget my 1st view of this spunk in a mini-skirt,,,my dad said I shouldn't look but he was and so was every other bloody male,,,great day indeed.

Neil.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...