Jump to content
SAU Community

Recommended Posts

Regrettably, the time has come to sell my pride and joy in order to move on to bigger and better things in life. I'm the first and only owner of the car, since having it personally imported for me, through J-Spec. It was purchased in 100% stock condition right down to the factory exhaust and wheels. Every modification and all of the work done has been done here by RE customs.

The car has been serviced every 3 months/5000km's whichever came first, by RE customs, using top of the line Motul oils in the engine, gearbox and diff.

There is currently 123,000kms on the clock, with 28,000km's on the turbo and engine since the rebuild.

1998 Series 2, 40th anniversary edition

Engine

-Rebuilt RB25DET

-Arias forged pistons

-ACL race bearings (big end and main)

-Reconditioned head

-Gates Racing timing belt

-HKS GT-RS (purchased brand new from Nengun at the time of the rebuild)

-S15 440cc injectors (only been in a few thousand kms)

-Z32 AFM

-Splitfire coilpacks

-Bosh 023 fuel pump

-SARD fuel pressure reg.

-3" turbo back exhaust consisting of Xforce stainless steel bellmouth front/dump, Catco highflow cat and Xforce mild steel catback

Last dyno run made 253rwkw on 18psi

Cooling

-Blitz LM turn flow front mount (no holes in chassis, stock piping retained)

-Trust 13 row oil cooler kit

Suspension and handling

-Sydney Kid GB Bilstein shocks with Whiteline springs

-Front and rear Whiteline fixed sway bars

-Front and rear Whiteline camber and castor kits

-Whiteline rear subframe alignment kit (pineapples)

-HICAS lock bar

All suspension fitted by Centreline suspension in Thomastown

-Cusco front strut brace, Nissan rear strut brace

-Volk 18x8.5 18x9.5 +22 bronze TE37's in perfect condition

-Hankook K107's, 235 front 265 rear

-Rays Duraluminum lightweight locknut set

Braking

-RDA grooved and dimpled rotors front and rear

-QFM A1RM pads front and rear

-Rebuilt calipers front and rear

-ADR approved braided brake lines

-Brake cylinder stopper

Electronics

-Power FC with hand controller

-Blitz SBC Spec-R EBC

Interior

-Rare factory option MOMO steering wheel

-Autometer Cobalt series gauges (boost/oil pressure mounted on pillar, oil temp mounted in DIN slot)

-Genuine series 2 floor mats (not the ugly white speckled ones seen in most 33's)

-1kg CAMS approved fire extinguisher

-Pioneer DEH-8650 MP3 headunit

-Alpine DDD 6" splits front, 6" rears

-Amec black 300km/h cluster

-Blue L.E.D cluster lighting

-Nismo leather gear knob

-Apex-i turbo timer

-RAZO pedals

-Insurance approved black wire alarm system/immobiliser etc

Exterior

-Type-M body kit with factory fitted genuine adjustable GTR wing

-Tinted windows

-Nismo smoked side indicators

The plenum and all visible piping, as well as the intercooler, brake callipers and hubs have all been powder coated black.

I have receipts for pretty much all parts and work carried out as well. All parts have been purchased brand new and quality Jap brand name parts have been used in lieu of cheap Chinese imitations.

Price: $21,000 ono

I'm willing to sell without the TE's (stock rims will be provided) for a lowered price.

PB300014.jpg

post-a194518-23.jpg

post-a194517-22.jpg

n630251291_1453950_4461.jpg

IMG_5199.jpg

Link to comment
https://www.sau.com.au/forums/topic/274145-1998-series-2-r33-gts-t/
Share on other sites

I endorse this product and or service.

Was in mint condition when we imported it for Dezz, was the last of the R33 GTSt's and had all the factory goodies that Nissan could throw in it being a special edition. all mods done in oz from scratch, and its still mint.

GL with sale.

This is the best R33 gtst for sale i have ever seen, has everything i'd want for it and been rebuilt.

Thanks for the comments, usually comments like that only come from the sellers mates but pretty sure I don't know you lol

Listen to what he has said.

If the buyer doesn't want the rims, then he will sell them.

Yeah pretty simple really..

Also forgot to mention, rocker covers and timing cover have been professionally painted in Cusco blue.

Apex-i panel filter always used in the stock airbox

In a few of the pics it looks like theres gtr or aftermarket seats in it, something else you forgot to mention? lol

Edited by Joe_89

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • PRICE  : $1400 LOCATION   : NSW Central Coast FIT  :  All Nissan 350Z type Z33 and Infinity G35 Coupe. See delivery note. Hi, brand new, unused, still in the box.  ($1850.00 is what i paid ) My bad luck !!! I thought my right front  Bilstein was cactus so i bought the ST 's to replace all.  Turns out the right front is fine ( loose mounting after service  by a well known importer of Bilsteins ) So im selling the ST's. They are made by KW ( no intro needed ) . Iam on the Central Coast and im willing to meet up in Sydney metro, within reason and Newcastle.
    • Yep, yeah would need to do the flywheel although the 6 bolt NA clutch can handle a 20de if just wants to replace the stocker.
    • No it's fine. Heat sleeve is a thing. With oil running through it it is unlikely. Engine off heat soak can be a thing though. There is no way that you have a leak through the hose. That has pressure behind it and any small hole will turn into a large one in very short order. It is so much more likely to be leaking from the connection.
    • Really? That's piss weak. I didn't know they hobbled the shitboxen that badly. OK. So probs need to buy a flywheel too. But that's not too bad.
    • Hi all. I already posted some newbie-ish questions here and there but this will be my first "big" post. Last summer I went and fulfilled a kind of childhood wish, because I just thought I needed this experience in my life no matter what. The car I bought is a mildly modded 1995 BCNR33 Vspec. It was repainted to a metallic orange color all around and it had all windows reseated. Not so well done black respray in the trunk and a metallic black in the engine bay. From outside it looks very nice except for a minor paint error on the roof and the rear spats needing new adhesive tape. The inside is pretty clean and no broken plastics, missing or faded buttons. Even the adjustable mirrors and trunk antenna work like a charm. Despite a moderately long list of issues I don't (yet) regret buying this car. Most mechanical problems are just due to age, like worn rubbers here and there. The underside sadly has lots of corrosion, especially to the back. It looks like it either has been driven in the winter for a while or it lived near the saltwater in Japan, the rust is nothing terrible but it'll require to be looked after. Mostly panel gaps and all the mounted components underneath are a bit crusty, but I don't think anywhere has progressed so badly that there's going to be holes. Front right jacking rail is crushed and needs some care so it doesn't develop into a rust crater at some point. Worst part is definitely the strut towers. I thought they looked fine but after taking off the strut bar I noticed that it actually started bulging up on the passenger side. Probably would have passed on the car or negotiated down by some thousand Euros more if I had noticed this before buying, but here we are. Trunk area also has signs that there was a water leak to the interior once but nothing too crazy, I guess lots of Skylines had this at some point. As for the list of (known) issues, I'll try to make this compact. I hope the coloring is self explanatory. Mechanical: -Various busted or soon-to-be busted rubber bushings and ball joints. Will replace ball joints with OEM or better and bushings with polyurethane where possible. -Shaking steering wheel at above 80kph -downshift from 5th to 4th is a bit crunchy unless I rev-match, might just try to renew the shifter assembly, but it's not a priority issue -tailshaft centre bearing could use a replacement, is it worth going 1-piece tailshaft as it doesn't look too fresh all around? Chassis: -underbody corrosion on many spots and in hollow spaces, needs to be treated -corrosion on many bolts, hoses, lines, suspension components, subframes, will be treated when replacing of the bushings is needed as time goes on -strut tower top panels and some of the surrounding panels are rusty, so needs fixing. Will look into doing this with a buddy in the winter, otherwise bite the bullet and pay a professional -driver side door is misaligned to the body and needs to go a slight bit more inwards -both door windows are misaligned and have an airgap where the window meets the door at the B pillar -The Aerocatch latches for the bonnet have locks but no keys, need new keys. -driver side door window is kind of gritty and could use a polish -damaged jacking rails and front frame rails, from people lifting the car the wrong way, might have this fixed by a bodyshop Electrical: -Nismo tachometer is just bouncing and displaying nonsense, supposedly worked fine when the stock ECU was still in the car -An old Greddy boost controller sits on the dash which will be removed as it servers no purpose anymore. -a led segment rpm gauge is on the steering column, will probably also be (re-)moved once the Nismo tacho is working correctly -there was an attempt to make the sound system better by the previous owner but it was just inducing noise all the time, ripped out the amp and filters in the back, no music for now -trunk antenna goes up as long as the radio is on regardless of the mode, I want it to only rise if I choose Radio specifically or per switch -3rd brake light is a bit dimmer than the taillights but everything was converted to LEDs so mabye now it just seems dimmer? -reverse light flickers, have to test if that behavior changes when I fiddle with the gear stick. Hope I can get around changing the switch. -Left side taillight, blinker section has minor water intake and is humid after washing. Other side has a hole in it, probably for that exact reason. I'll probably reseal them entirely and plug the holes. Engine: -minor coolant drips on one or the other hose -rear turbo leaks oil onto the exhaust making the car essentially undriveable due to fire hazard -Oil filter relocation kit has an oil drip at the Dash lines, will probably make a new connection there and tighten real good and pray -throttle body assembly is slightly stuck for the first throttle pedal input after sitting for a while I'm always open to suggestions and advice from more experienced people, I'm sure half of this list is easily dealt with and just requires some time and effort to sort out properly. Once I have some proper pictures of the car I will post some in this thread, I just have to remember to take some more once I get the chance to. Will post updates when I have news on anything, I want to try to keep this thread as kind of a logbook as well. Ultimately my goal for this car is to just enjoy it. An engine rebuild is probably going to happen sometime as well, because it is old after all. It will never be fully new again, I am just not that rich. But I want it to look good, work well and not rot away while I drive it. I'm probably gonna spend a lot of money on this journey, hopefully not an unreasonable amount.
×
×
  • Create New...