Jump to content
SAU Community

Recommended Posts

....... 'waits for MIKE to chime in' .......lol

lol

this is my current height with tein coilovers which i think is perfect. i still have some adjustment left in the them, could probably go another 20mm lower all round if i wanted to. my current eyebrow heights are ~320mm

that being said my new coilovers just arrived waiting to be fitted.. 2 way height adjustable racing gear jobbies :D - decided base height adjustable was deff a better option to keep spring rates decent.. if you really want when i fit them next week i can take some photos of just how low they can go?

100_0844.jpg

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

lol

this is my current height with tein coilovers which i think is perfect. i still have some adjustment left in the them, could probably go another 20mm lower all round if i wanted to. my current eyebrow heights are ~320mm

that being said my new coilovers just arrived waiting to be fitted.. 2 way height adjustable racing gear jobbies :D - decided base height adjustable was deff a better option to keep spring rates decent.. if you really want when i fit them next week i can take some photos of just how low they can go?

That is the answer I wanted and the look. Thanks

Correct me if I am wrong, I believe you have Tein HA's in your car?

How much clearance between the lower platform and the wheel? I do not think I will have clearance issue's as I need to fit 25mm spacers to the r34 GTR wheels (to make them 18x9 +5) to fill out the GTR front end. It will also make the front end track the same as the rear.

What are the new shocks? Price? Pm me if you want.

I have a call into Bilstein for availaiblty and details.

So you are on the lowest setting on the bilsteins? But what height/length are the teins. Are they lowered or standard height?

Bit hard to compare. The lowest setting on the bilsteins might be low enough for me, but until you quote the ride height measurement, it is a bit hard to compare.

Not really tring to make the car useless, just trying to fill out the guards.

In sydneykid's group buy, he was setting the car the at 350mm. I believe mine sits higher than that, but I have ran out of adjustment to lower it further, hence the need for asked info. What shocks and what measurement are people using?

My heights are 350mm front and 360mm rear. I don't think the shocks are on the lowest setting but you can machine more grooves if necesary. The shocks are WGNC34 specific Bilsteins but relabelled as Nismo:

front: Nismo 56110-RSC45 ENP

rear: Nismo 53210- RSC45 ENP

Springs are Tein lowering springs:

front: Tein F-SIN78-010311-HCC

rear: Tein R-SIN79-010382-HCC

As far as appearances go some cars seem lower to the ground because of the body kits. I have 17x8in wheels and the extra width looks better. If you are getting more power you could probably run bigger wheels (as in bigger rolling circumference) which would raise your gearing (no good for drags but probably good for everything else).

...Bob

That is the answer I wanted and the look. Thanks

Correct me if I am wrong, I believe you have Tein HA's in your car?

How much clearance between the lower platform and the wheel? I do not think I will have clearance issue's as I need to fit 25mm spacers to the r34 GTR wheels (to make them 18x9 +5) to fill out the GTR front end. It will also make the front end track the same as the rear.

What are the new shocks? Price? Pm me if you want.

I have a call into Bilstein for availaiblty and details.

these are the new ones http://www.c-red.com.au/index.php/newparts...nd/category/rg/

you'll have oodles of inner clearance with a 9+5. it'll sit almost identicle to the outside of my wheels and you'll have an extra 15mm of room on the inside

sounds like your boat is going to look mighty nice when you're finished.. low offset, ride height.. win in my books :blink:

these are the new ones http://www.c-red.com.au/index.php/newparts...nd/category/rg/

you'll have oodles of inner clearance with a 9+5. it'll sit almost identicle to the outside of my wheels and you'll have an extra 15mm of room on the inside

sounds like your boat is going to look mighty nice when you're finished.. low offset, ride height.. win in my books :blink:

Only the fronts wheels will be +5, the rears will stay at +30.

Have been looking at new volk GTC's in 18 or 19's. Would be able to order different offsets and get max front dish/rim because should not have too much caliper clearance issues.

Mike, do you the difference between face 1 and 2. one is for high caliper clearance

Price back for bilsteins. Shocks only with extra groves $1265 set. Still would need springs to suit.

Mine is Running Abflug coilovers, and the wheels are 19's. I've since raised the front about an inch as i was sick up it bottoming out on little bumps as its my daily.

I have 34 gtr vspec lower diffuser, fibreglass copy. Not sure how long it will last thuo.

Needs to be lower than that one

I need measurements to back how low your car is guy's. If it sometimes scraps or hits something, that's all good and well.

I want it be lower, so need to make sure I buy the right coilovers that fit the job!

Only C34's need apply.

:D

i no its too low but feck it looks good :P... thats teins 1/4 wound up with helper springs :S... had to lower it onto the old rotors to get the jack out :) my nokia n95 just fits under the front bar lol

post-47249-1245333605_thumb.jpg

:D

i no its too low but feck it looks good :P... thats teins 1/4 wound up with helper springs :S... had to lower it onto the old rotors to get the jack out :) my nokia n95 just fits under the front bar lol

Just need to fit some spacers to fill the guards out and it would be perfect :D

What model Teins? HA's??

:P

i no its too low but feck it looks good :)... thats teins 1/4 wound up with helper springs :S... had to lower it onto the old rotors to get the jack out :) my nokia n95 just fits under the front bar lol

Yeah it needs spacers to fill the guards so its not falcondore spec :down:.... Sure as hell the rear coils I adjusted didnt get wound up a 1/4 of the way! more like 1.5cm of thread!

Darrin I think heir HR's?

To bloody low,

I want some adjustable gear, i dont have any new photos but this gives an idea. It doesnt look that low when you compare it to the others. Still sh*ts me tho. Especially on sharp hills.

post-62319-1245390946_thumb.jpg

I used to have a company car that was an 07 commodore. Surprisingly it was never phased by any speed bumps, kerbs or road islands. That bad boy just went up and over with no problem at all. Company cars can do anything.

Company cars can do anything.

Cop cars can do more. My 2 best mates are cops. Some of the stories

One mate, 3 weeks into the job put a 1 week old commadore into a creek chasing someone on a dirt road. They opened the doors, drained it and drove it for a few months then it got sold at auction to some poor mum and dad.

To bloody low,

I want some adjustable gear, i dont have any new photos but this gives an idea. It doesnt look that low when you compare it to the others. Still sh*ts me tho. Especially on sharp hills.

post-62319-1245390946_thumb.jpg

I used to have a company car that was an 07 commodore. Surprisingly it was never phased by any speed bumps, kerbs or road islands. That bad boy just went up and over with no problem at all. Company cars can do anything.

Looks pretty standard height wise.

How high do you want it?

If you are having an issue with that ride height, I would suggest that you forget all about a 3" turbo back exhaust!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...