Jump to content
SAU Community

Recommended Posts

hey just wanted to get an opinion of what u think i should an can do to my r33gtst with $2000.00.. has got greddy bov, hks pod, 3'' exaust from dump back an is boosted to 12psi already..! was thinking of frontmount an dump.. uping boost to 15psi.. i can get that done for around $1500.00.. so still got alittle to play with untill such time.. what do u think? dont want to do all that much to it but..!??? should that give me a good power gain..?

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/
Share on other sites

adding a dump pipe won't increase the boost unless it is a poor design and doesn't alloy the wastegate to flow properly.

unless you have an aftermarket ecu you won't be able to run 15psi anyway, although you would gain power from doing it, but you may find your turbo doesn't last very long before it goes on a diet (and the exhaust wheel comes off the turbo and makes friends with your catalytic converter)

if a dump pipe is costing you $1500, i really suggest you find a new place to shop unless you get a shag every night for a week from a really hot chick with it. just get a cheap split dump pipe for about $100. i had one on my 33 and it worked fine.

i would also get a fmic kit, especially if you are running 12psi through the stock one. the stock cooler will suffer heat soak after only a few hard accelerations and basically won't be doing much cooling after that.

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4669810
Share on other sites

adding a dump pipe won't increase the boost unless it is a poor design and doesn't alloy the wastegate to flow properly.

unless you have an aftermarket ecu you won't be able to run 15psi anyway, although you would gain power from doing it, but you may find your turbo doesn't last very long before it goes on a diet (and the exhaust wheel comes off the turbo and makes friends with your catalytic converter)

if a dump pipe is costing you $1500, i really suggest you find a new place to shop unless you get a shag every night for a week from a really hot chick with it. just get a cheap split dump pipe for about $100. i had one on my 33 and it worked fine.

i would also get a fmic kit, especially if you are running 12psi through the stock one. the stock cooler will suffer heat soak after only a few hard accelerations and basically won't be doing much cooling after that.

nah..! that price includes the dump,r33 front mount and fitted an a service..! not to bad.. cheap. think ill keep the 12psi but.. dont want to kill the turbo.. yet!

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4670098
Share on other sites

$2k?

I would spend 600 on a stage 2 advanced driving course and 1400 on a set of track tyres. you've already got everything else you need to go quick in the car

u dont think i need a front mount an dump pipe to give that little extra..?

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4670107
Share on other sites

you do NEED a front mount. as mad082 mentioned earlier that the stock cooler will be suffering from heat soak.

get the dump pipe.

go get a nistune done as well and that will keep you happy for the time being.

yer i think that is the go for sure.. do u think that will give me close to 200rwkw..? thats really all iam aiming for off this car.?

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4670312
Share on other sites

the issue with the stock turbo is the ceramic exhaust wheel. when they are highflowed they usually have a steel wheel put on (as where it sits is made larger so needs a larger wheel). the limit to what you can run then is then down to mods and what pressure it stops making power, but would be well above 15psi

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4673653
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...