Jump to content
SAU Community

Recommended Posts

hey just wanted to get an opinion of what u think i should an can do to my r33gtst with $2000.00.. has got greddy bov, hks pod, 3'' exaust from dump back an is boosted to 12psi already..! was thinking of frontmount an dump.. uping boost to 15psi.. i can get that done for around $1500.00.. so still got alittle to play with untill such time.. what do u think? dont want to do all that much to it but..!??? should that give me a good power gain..?

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/
Share on other sites

adding a dump pipe won't increase the boost unless it is a poor design and doesn't alloy the wastegate to flow properly.

unless you have an aftermarket ecu you won't be able to run 15psi anyway, although you would gain power from doing it, but you may find your turbo doesn't last very long before it goes on a diet (and the exhaust wheel comes off the turbo and makes friends with your catalytic converter)

if a dump pipe is costing you $1500, i really suggest you find a new place to shop unless you get a shag every night for a week from a really hot chick with it. just get a cheap split dump pipe for about $100. i had one on my 33 and it worked fine.

i would also get a fmic kit, especially if you are running 12psi through the stock one. the stock cooler will suffer heat soak after only a few hard accelerations and basically won't be doing much cooling after that.

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4669810
Share on other sites

adding a dump pipe won't increase the boost unless it is a poor design and doesn't alloy the wastegate to flow properly.

unless you have an aftermarket ecu you won't be able to run 15psi anyway, although you would gain power from doing it, but you may find your turbo doesn't last very long before it goes on a diet (and the exhaust wheel comes off the turbo and makes friends with your catalytic converter)

if a dump pipe is costing you $1500, i really suggest you find a new place to shop unless you get a shag every night for a week from a really hot chick with it. just get a cheap split dump pipe for about $100. i had one on my 33 and it worked fine.

i would also get a fmic kit, especially if you are running 12psi through the stock one. the stock cooler will suffer heat soak after only a few hard accelerations and basically won't be doing much cooling after that.

nah..! that price includes the dump,r33 front mount and fitted an a service..! not to bad.. cheap. think ill keep the 12psi but.. dont want to kill the turbo.. yet!

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4670098
Share on other sites

$2k?

I would spend 600 on a stage 2 advanced driving course and 1400 on a set of track tyres. you've already got everything else you need to go quick in the car

u dont think i need a front mount an dump pipe to give that little extra..?

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4670107
Share on other sites

you do NEED a front mount. as mad082 mentioned earlier that the stock cooler will be suffering from heat soak.

get the dump pipe.

go get a nistune done as well and that will keep you happy for the time being.

yer i think that is the go for sure.. do u think that will give me close to 200rwkw..? thats really all iam aiming for off this car.?

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4670312
Share on other sites

the issue with the stock turbo is the ceramic exhaust wheel. when they are highflowed they usually have a steel wheel put on (as where it sits is made larger so needs a larger wheel). the limit to what you can run then is then down to mods and what pressure it stops making power, but would be well above 15psi

Link to comment
https://www.sau.com.au/forums/topic/275677-new-mods/#findComment-4673653
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...