Jump to content
SAU Community

Recommended Posts

I thought it may be helpful for some if I put up some pictures that show the easy way to identify a ceramic turbo over a steel wheeled variety. This may be helpful if buying used turbos or if you are unsure if your car has allready been fitted with steel wheel turbo(s). Pull off the front pipe and with an inspection mirror and a torch, and a bit of holding your tounge the right way, you will be able to see it.

GTRturbo4.jpg

Pic 1 - (above) This is a ceramic exhaust turbine - notice the double hex (12 point) end on the turbine.

Speedchaser02.jpg

Pic 2 - (above) This is a steel / inconel exhaust turbine - note the single hex (6 point) end on the turbine

t28exhaust.jpg

Pic 3 - (above) Also a steel / inconel exhaust turbine - note the triangle end on the turbine

The above is true for Garrett Turbochargers as found on Nissan Skylines RB20, RB25 and RB26 - with the exception of the N1 GTR and Nismo Built cars, all R32, R33 and R34 skylines were fitted with ceramic turbo(s) from factory. Hope this post is helpful!

Edited by Antimatter
easier way is to see if a small magnet sticks to it than remembering those lol

Have you confirmed this works yourself? There was some talk that the alloy used for turbines is not magnetic, but i cant remember if it ever got confirmed or denied.

Have you confirmed this works yourself? There was some talk that the alloy used for turbines is not magnetic, but i cant remember if it ever got confirmed or denied.

Inconel wheels dont attract a magnet. I assumed they would till I bought Nismo turbo's. When a magnet did not stick I sh#t myself thinking I had been ripped then I did some research. I can confirm the old turbos on my GTR did have 12 point head on the shaft and the Nismos had 6 point confirming this is a great guide...

Cheers

Lee

Confirmed - magnet trick does NOT work.

As someone else suggested - Inconel (the steel that turbine wheels are made of) is not magnetic. I.e. You will not be able to identify a turbine as steel with a magnet.

Can anyone confirm if the Garrett GT3037R is steel wheeled? I've been looking around for info on this for ages and cannot find my exact turbo on the net. Heres some pics of the turbo. Sorry i dont have any of the rear wheel.

post-28482-1246247368_thumb.jpg post-28482-1246247389_thumb.jpg

  • 4 years later...
  • 1 year later...

Resurrecting an old thread, but is there anyway to identify the exhaust wheel while turbos fitted to the car?

I've tried using a mirror to see the id plate, but no luck, thought about a boroscope to put up the downpipe but I think the turbo elbos have to sharp a bend.

I don't really want to strip the turbos down, what with all thew work involved. All I can assume is the ceramic wheels are still there so don't want to increase boost.

Thanks in advance. :cheers:

  • 8 months later...

I, too, am going to resurrect an old thread. Same question as ms33, can you check for ceramic/steel exhaust wheel while turbos are mounted? And the photos above are no longer hosted, so if anyone has a picture depicting the 6 vs 12 points he's referring to, that'd be great. Thanks!

Umm....pics 1 and 3 work fine for me. if you can see them then the rest is self explanatory.

You're right. Just checked on my phone. Work computer must've been blocking the host site. Thanks. Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...