Jump to content
SAU Community

Recommended Posts

I am going with the Haltech Interceptor in about a month....as for the Injectors, I am keeping them standard at the moment....hoping I don't have to change them as I am only going for about 200 - 210 killers wasps at the wheels with this motor :laugh:

Standard injectors are good for supplying fuel at 1.3bar (19psi) that I know of.

Will be going with the eManage Ultimate... eventually.

Will be interesting to see what the OE injectors can handle. Would like to see 230-250awkw in time.

Definitely think that 200awkw would be possible without further mods.

Edited by iamhe77
Standard injectors are good for supplying fuel at 1.3bar (19psi) that I know of.

Will be going with the eManage Ultimate... eventually.

Will be interesting to see what the OE injectors can handle. Would like to see 230-250awkw in time.

Definitely think that 200awkw would be possible without further mods.

I was hoping you had fitted the Emanage by now, I didnt want to be the first... Seems to be the best option according to Status tuning. :laugh:

I was hoping you had fitted the Emanage by now, I didnt want to be the first... Seems to be the best option according to Status tuning. :laugh:

Would have liked to, but more important stuff keeps popping up.

Will be next though... but next will be in a few months I would think.

I am going with the Haltech Interceptor in about a month....as for the Injectors, I am keeping them standard at the moment....hoping I don't have to change them as I am only going for about 200 - 210 killers wasps at the wheels with this motor :laugh:

haltech interceptor is a good option, they interrupt the signals before the ecu rather than after the ecu like the emanage does. Interceptor is like a top of the line more tunable safc/sitc setup. Do they have a plug n play option for the M35? I know they do for the 350z and I think also for the V35.

Do they have a plug n play option for the M35?

Nope.

Need a Universal Harness

Ideally I will have the eManage plugged into the Universal harness which is wired into a "field" harness which plugs into the ECU.

This way, I can unplug the eManage from the ECU without leaving a mess and plug the ECU loom back in, no problem. :laugh:

Edited by iamhe77
the emanage intercepts it before AND after the ECU, it depends on where the signal is coming or going.

i rekon an M35 plug and play would be hard to come by!

its only before on the AFM and after on the injectors for fuel adjustment, ignition is only done after. anyway, is the ViPec an option for the M35? it has been successfully installed on a S2 C34 which has the auto ecu bundled in with the engine ecu, it is a quite expensive option though.

I'll be going with an SAS ECU Remap, hopefully aiming for around 250 - 300 awkw.

Then again maybe I should be aiming for fuel efficiency :P

Don't think you will see 300awkw with just an exhaust, highflow and ECU remap.

I would be more than happy for SAS to prove me wrong though.

I think Steve has a typo....don't you mean approx 300 killer wasps at the crank?

LOL maybe, I just wanted to add 2 cents worth and get some change :(

It's just going to go fast ok :) and probably use the same amount of fuel it uses now :|

LOL maybe, I just wanted to add 2 cents worth and get some change :)

It's just going to go fast ok :) and probably use the same amount of fuel it uses now :|

Should use less bud.

I know a certain S2 with mild mods that has an eManage Ultimate installed.

Power was bumped up ~50awkw while giving the owner an extra 100kms or so per tank.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...