Jump to content
SAU Community

Recommended Posts

i have been questioned on the way im running in the new engine and that its a bit soft with 10psi and 5krpm rev limit.

would anyone recommend against raising the limiter to 8krpm for its last 300km before final tune? or best leave it as is

trying to get jims time is impossible

  • Replies 477
  • Created
  • Last Reply

Top Posters In This Topic

Just aquired 4 more RB30's to add to my collection and Phil at Argo has a pallet of rods available to me.

should be able to stack the pallet back on the rack for him after mine is built...lol

just think about the added torque u will have to lift that pallet

bigger is better haaa! i know from personal experience

i have been questioned on the way im running in the new engine and that its a bit soft with 10psi and 5krpm rev limit.

18-20psi and 7500rpm straight away and full power rpm within 500-750km max with 2 oil changes.

IMO more boost is more important than more rpm but 10psi and 5000rpm is being real soft on it.

I'd have had a basic mineral oil in there too and only go to full synthetic well AFTER you have done full power mapping.

Rob

18-20psi and 7500rpm straight away and full power rpm within 500-750km max with 2 oil changes.

IMO more boost is more important than more rpm but 10psi and 5000rpm is being real soft on it.

I'd have had a basic mineral oil in there too and only go to full synthetic well AFTER you have done full power mapping.

Rob

i finally spoke to crd and the reason why they want me to run-in soft is because they didnt build the bottom end hence being very precautious. at the very least the engine is being well respected and just about impossible to fail in its early stages which is a good thing

everyone has their own method to their madness

From what i'v read the majority of bedding in happens within the first drive (or best bit of the hone wears away) that is the most critical time to get the rings bedded in, after that you've missed the biggest opportunity. After that it's recommended to use mineral oil for a while to let the rest fully wear in.

If you stuff up the first bit you can never fix it up. unless re-hone and rings.

i have been questioned on the way im running in the new engine and that its a bit soft with 10psi and 5krpm rev limit.

would anyone recommend against raising the limiter to 8krpm for its last 300km before final tune? or best leave it as is

trying to get jims time is impossible

Marko, I'd recommend against raising the limit, only because the engine hasn't been tuned at those sort of revs so you really have no idea what it will be doing fuel or timing-wise above the revs it was set up at.

Marko, I'd recommend against raising the limit, only because the engine hasn't been tuned at those sort of revs so you really have no idea what it will be doing fuel or timing-wise above the revs it was set up at.

i agree greg which is why i decided to leave it as is until i get the full power tune

im undecided whether i should update my exhaust...i have a hks superdrager & as some would know the exhaust increases in diameter.

i.e. starts @ 3.25" just after the front pipes, steps to 3.5" then goes to 3.75" under the diff to the back of the car.

im tempted to leave it as is for the final tune & if it becomes a restriction i'll then probably update the 3.25" piece to 3.5".

rob - u had the best idea by asking my tuner to drop the exhaust when its on the dyno to see if there is much of a difference

im thinking out loud.

Edited by Marko R1

So its basically a GT-RS sized turbo.

Ill be suprised aswel if you dont crack the 400's.

As an example, my GT-RS's @ 18psi netted 371kw's. My head doesnt flow anywhere near the amount yours does. Thats also cams not dialled in.

That tune took all of 45mins and was quite rich. It was done in a hurry as i had to drive it interstate literally straight away. I know with the cams done, decent boost and timing it wouldve cracked the 4's - so you should be a shoe in to the 4's

After all the SMS's, PMs and emails i expect at least an SMS as soon as its off the dyno and you've taken it around the block :blink:

well i worked out if i made 270.9awkw @ 6800rpm;

theoretically @ 8500rpm it will make 338.62awkw (if i use the formula of 39.84awkw per 1000rpm).

before anyone rips me apart, i know that the power level is not consistent across every 1000rpm & the power may even drop off higher in the rpm hence this is just an average number & 'guesstimate'

...this is calculated @ 10psi with cams @ 0degrees.

with more than double the boost & tuned cams it 'should' piss in over 400awkw :blink:

now where's that flux capacity & white coat!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...