Project 'gozila'...

[Piggaz]

Ah Marko you found one! Nice work!!

When you bringing her around? haha

-5's and Steve. He has bought a set however they are not going on yet. Im tossing up the idea of throwing a set on -5's on mine.

[Marko R1]

paul - if i dump the rb26/30 in the red gtr, i can sell you my -5s?

[Piggaz]

How much work have they done?

[Marko R1]

only 5000km

[J - Rad]

I say swap the wheels over. Nismo LMGTs are alot more era specific and "GT-R-ish" than the DTM rushes (that's what they look like). Plus the white will work well with black.

[Marko R1]

I say swap the wheels over. Nismo LMGTs are alot more era specific and "GT-R-ish" than the DTM rushes (that's what they look like). Plus the white will work well with black.

i agree - im keeping the lm gt1's & selling the dtm rush wheels with the red gtr

[Piggaz]

First things first Marko.... Get rid of that dirty yellow and black number plate. Yuck! haha

[Marko R1]

First things first Marko.... Get rid of that dirty yellow and black number plate. Yuck! haha

yeah mate - my black & silver GO21LA plates are going straight on it

[rockabilly]

there,s -5 everywhere for sale, only problem is they are in oz............lol

[Marko R1]

i have a question...if my rb26 with -5s is making 334awkw @ 19psi, what can i expect at a higher boost of say 24psi?

is there a formula i can refer to which approximates kw increase per psi added?

[Simonster]

Rough rule of thumb, if she's still making at least 10hp per psi added, she's still reasonably efficient. When it drop below 10, it's time to think about stopping.

[Marko R1]

thanks - i thought there would be a rule of thumb of some sort

[Marko R1]

im going to pull out the 26 & drop in my 26/30 in the red gtr...i dont want to cut the bonnet again, hurts just thinking about it

anyway, who has had any success in lowering the engine to negate modifying the bonnet?

ive done some research & have decided to slot my engine mounts & EITHER raise the back of the gearbox in order to drop the front of the engine OR maybe even adding some small spacers between the cross member & chassis rails. any guidance is much appreciated!

thanks to those who have given me advice to date, you know who you are

[jangles]

the whole geometry thing is out the window anyway!

put some 10mm spacers in your subframe... think there was a thread where someone did it?

[Marko R1]

yes - that is what i was thinking, here is the pic!

this with slotting engine mounts should work.

[TiTAN]

put an RB25 cam gear cover on it?

[r33_racer]

Dont run a cam cover.... Gives it that racing look

[TiTAN]

Dont run a cam cover.... Gives it that racing look

inlet cam or exhaust cam cover? i think thats a bad idea

[r33_racer]

lol I meant front timing cover, or cam gear cover. My bad.

[Marko R1]

lol I meant front timing cover, or cam gear cover. My bad.

ive never run the front cam cover. looks much better without it, i agree

anyone tried the rb25 engine covers?