Jump to content
SAU Community

Recommended Posts

plug 1

plug 3

plug 6

all died... after only having them in the car about a week... sam tells me its cause they dont perform under high boost... wish i had known that before :cheers:

I'd replace them all. Are you sure it's not due to detonation though, that is what normally kills plugs. I ran platinums in my car, making over 400rwhp at 18psi and there were fine. I now run BCP7ES plugs, which seem to be working very well, and there much cheaper:D

yeah it happend at calder... at first i was only running 10psi which ran a 14.08 then we decided to up it to about 13psi to get into the high 13s... this is where they melted down... 3/4 down the strip POP and black smoke... still ran a 15.4 after backing down the rest of the qtr haha nice one sam

for now ive replaced them with another 3 platinums as the dipshit at autobarn didnt know what coppers to use and the only thing his book had was platinums... i only put the others in about 2 weeks ago so they are pretty much new... just took it around the block at 9psi hitting 8500rpm around the corners and had no apparent issues... will leave the boost at the level its on incase my guage isnt showing the proper boost levels (only have ableed valve so have to rely on the guage)... looks like its time to take it to the dyno and make sure the guage is accurate.

What happened to the rest of the plug ?? Did it just melt or did it go through the valve/exhaust/turbo etc -

Nasty stuff !

I've seen other threads with other (Unigroup guys) saying that this has happened them numerous times with Iridium plus !!!

Damn I'm not gonna let this happen in my new engine !!!

Hmmmm

Looking at these plugs the mixture looks okay. No clogging soot or leaning out light tan colour.

Looks like the piston is hitting the electrode ?

If you look at the higher boost racing plugs they have the electrode way deep in the body of the plug and ewither side gap or small gap.

These seem not to ?

gordon - thats not the code of the plugs that were in there b4... i thought i kept them so i could put them in if i had any trouble with the platinums... guess i didnt.

this is the first time in over a year of having the car that this has happend... this is also the first time since owning the car ive changed the plugs... the last ones looked like they had been in their for a long time but still looked reasonably healthy. Ive run my car with 16psi without any issues on em...

i think i might pop into BMT and put it on the dyno and check the boost levels cause i think my guage isnt working properly...

oh well.. it was a costly mystery... probably one which i wont ever find out the actual cause.

yeah i think they have died in the arse again... after i put them in they ran fine... closed off the bleed valve so that it was running "stock" boost and gave it a nice run around the cheltenham rd area and now it sounds like a WRX (very bubbly and unstable.... not smooth like normal...) so more fun for me tomorow pulling everything apart and checking the plugs again.

if they have died AGAIN im taking them back and demanding my money back because that is 9 plugs ive gone thru ($180) in less than a month which is bullshit considering this is the "recommended" plug according to them.

coppers here i come!! (yet another $60)... think i might try the bosch super 4s out... no need to gap them then.

Get the NGK BKR7E. I have a set of them in my car. Very good plugs! NGK Tech said they are a better choice than the BCPR7s because of the V-grooved electrode and also more suited to Nissan heads (something about grounding). Tho the BCPR are still not bad...

The BKRs same price as the BCPRs aswell...

And stay away from the bosch plugs. Stick with NGK. They make the best plugs in the world..

Just wondering what kind of GAP the plugs had?

Have a read through the technical tips here http://www.ngkspark.com.au/ there is some VERY useful info about plugs, gapping, heat ranges etc.

FYI, this site recommends Platinums as the standard factory plug for my car, not sure about 32's or 33's though.

That site is better than www.ngk.com.au as this one doesnt have any skyline imports listed just the local 31's etc.

Well worth a read through the tech tips if you wanna know a bit more about ignition / spark plugs etc.

maybe add to sticky list :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...