Jump to content
SAU Community

Recommended Posts

hey guys,

I've just gotten back from holidays in Queensland (got to drive a friend of a friends 260RS). When I got home, I found a bat (or flying fox or something) has then a crap on my car. I went to wash my car tonight and it didn't wash off....so it looks like its been on there for about 2 days

does anyone have tips on getting it off

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/
Share on other sites

Be VERY careful with washing-up detergent. I would say do NOT use anything with detergent in it (it can damage your paint), but if you are going to wash it off straight away, you should get away with it.... The hot water is a good idea, but I'd honestly still prefer to use a car-washing soap.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4699710
Share on other sites

^what he said

Also, try Meguiars Clay Bar system, just make sure you use the quick detailer (waterless car wash stuff) with the clay bar. It should take out the caustics too, which is what will damage the paint :) Good luck and let us know how it goes

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4699812
Share on other sites

Depending on the type of bat.... mallet and chisel?

I get some pretty nasty bird crap on my car that those stupid high pressure car washes fail to remove (oh, but they'll rip the lower door strips alright :P ), I have been successful with the Maguiars Gold Car wash and the "mesh" side of my car mitt (it is one of those noodle ones from Autobarn).

I usually use cold water, but if they are particularly stubborn, warm water with the Gold wash/mitt combo works every time :)

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4700148
Share on other sites

sorry to hijack a bit here just thought while we were on the topic of cleaning, does anyone have any kind of idea what i could use to spray the back of the car with to degrease or lift some of the crap the exhaust leaves? Some kind of detergent that will break it up so scrubbing it off isn't such a work out?

cheers

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4700245
Share on other sites

sorry to hijack a bit here just thought while we were on the topic of cleaning, does anyone have any kind of idea what i could use to spray the back of the car with to degrease or lift some of the crap the exhaust leaves? Some kind of detergent that will break it up so scrubbing it off isn't such a work out?

cheers

need your self a citrus based wash man, pm me and ill give you some details,

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4701561
Share on other sites

A little kerosene in warm water is a good solvent, or some isopropanol wipes are a good option.

CBC also have sell industrial cleaning wipes which worked wonders at removing the rusty water stains from all over the engine bay on our 1200 ute - they are a general purpose cleaner that can be used on various surfaces and also your skin.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4703824
Share on other sites

^what he said

Also, try Meguiars Clay Bar system, just make sure you use the quick detailer (waterless car wash stuff) with the clay bar. It should take out the caustics too, which is what will damage the paint :( Good luck and let us know how it goes

+1 for the clay bar......best product to get paint back to excellent condition.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4704983
Share on other sites

I find for stubborn bird crap, I soak a regular sponge in water and then plonk it on top of the crap - leave it there for 10 mins and the crap will suck the water in and pretty much fall off the paint once it's rehydrated :rofl:

i do it similar to this but i just use a clean old rag. let soak for 15mins or so, then wash and polish the car straight after. always remember to get bat crap off asap.

Link to comment
https://www.sau.com.au/forums/topic/278047-damn-bats/#findComment-4707803
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...