Jump to content
SAU Community

Recommended Posts

Hi guys just thought I would give you a heads up incase you damage you lower spoiler and need to get it replaced. I had my bumper scratched including the lower spoiler by a Valet car park attendant. They agreed to cover the costs, however the quote I have got to get this done is amazing:

Front Bumper: $2768 (Supply Only)

Front Bumper Lower Spoiler: $2058 (Supply only)

This is without painting. Total repair is $7440.00 with painting, fitting etc. Makes the $999 ebay one quite attractive.

The scratch is not that bad, but the car was new before they did it and as such it is going to be new after the repair.

Lesson: Treat the car with care...repairs are expensive

lol, hope you get to keep the old one too.... then you now have a "track" front end and a "road" front end. or should that be "valet" front end and "Jeff" front end....

I've scratched the bottom of my front lower (lip) spoiler, and i am sure lots more scratches to come!

Out of interest, do you have a part number for the lip spoiler and where can you get them (direct from Nissan?)

Hi guys just thought I would give you a heads up incase you damage you lower spoiler and need to get it replaced. I had my bumper scratched including the lower spoiler by a Valet car park attendant. They agreed to cover the costs, however the quote I have got to get this done is amazing:

Front Bumper: $2768 (Supply Only)

Front Bumper Lower Spoiler: $2058 (Supply only)

This is without painting. Total repair is $7440.00 with painting, fitting etc. Makes the $999 ebay one quite attractive.

The scratch is not that bad, but the car was new before they did it and as such it is going to be new after the repair.

Lesson: Treat the car with care...repairs are expensive

If I ever damage my Lower Spoiler, or maybe even sooner, I am bying a CF one-piece for less than half that price to match my new rear wing and bonnet scoops.

If we added up all the component replacement parts Nissan deems so precious, this car would be worth $10 Million in a knocked down form. Then you pay the dealer $200 per hour to put it all together and it will take them a year....

post-62393-1247205364_thumb.jpg

If I ever damage my Lower Spoiler, or maybe even sooner, I am bying a CF one-piece for less than half that price to match my new rear wing and bonnet scoops.

If we added up all the component replacement parts Nissan deems so precious, this car would be worth $10 Million in a knocked down form. Then you pay the dealer $200 per hour to put it all together and it will take them a year....

post-62393-1247205364_thumb.jpg

whose carbon goodies are those? quality ok?

whose carbon goodies are those? quality ok?

Quality and fit are good. Bonnet scoops on already, rear wing will be done on Saturday.

I will post better pictures in full daylight tomorrow.

I will give everyone vendor details and prices once I know these things actually fit. I don't want to give them any more

business until these pieces are confirmed 100%.

They "cunningly" replicate everything with quite an amazing degree of accuracy and perfect finish at 1/3 -1/2 the price of Mine's, Zele etc..

I don't necessarily want all their CF gear at once, but they have Front Spoilers, Bonnets, Boot Lids, two types of rear wing (OEM type you see here and elevated Mine's-type without centre post and brake light), Front Fenders, Fender vents, Engine Covers, Radiator Covers, Side Skirts, the lot!

post-62393-1247230227_thumb.jpg

post-62393-1247230258_thumb.jpg

post-62393-1247230291_thumb.jpg

Edited by GT-Ricer

Carbon looks great on these cars. I just saw a huge pile of carbon bits waiting to go on a new R35 here in Adelaide.

The guy has purchased just about everything from the password JDM catalog & will look awesome when finished.

Quality and fit are good. Bonnet scoops on already, rear wing will be done on Saturday.

I will post better pictures in full daylight tomorrow.

I will give everyone vendor details and prices once I know these things actually fit. I don't want to give them any more

business until these pieces are confirmed 100%.

They "cunningly" replicate everything with quite an amazing degree of accuracy and perfect finish at 1/3 -1/2 the price of Mine's, Zele etc..

I don't necessarily want all their CF gear at once, but they have Front Spoilers, Bonnets, Boot Lids, two types of rear wing (OEM type you see here and elevated Mine's-type without centre post and brake light), Front Fenders, Fender vents, Engine Covers, Radiator Covers, Side Skirts, the lot!

post-62393-1247230227_thumb.jpg

post-62393-1247230258_thumb.jpg

post-62393-1247230291_thumb.jpg

CF wing on now.

post-62393-1247405416_thumb.jpg

post-62393-1247405597_thumb.jpg

I would never let a vallet take my r35 in the first place. I don't care, Ill eitehr take my daily to a place that has vallet parking or park somewhere else, where I know its safe.

I am usualy that way, but it was a last minute business meeting at a 5 star hotel in the City. I have never had issues before, however to their credit they owned up straight away and showed me where they had damaged the car, they did not wait for me to find it.

I do have a range of cars I could have taken, however I love to drive the R35, it has become my everyday car now...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...