Jump to content
SAU Community

Recommended Posts

Hi guys just thought I would give you a heads up incase you damage you lower spoiler and need to get it replaced. I had my bumper scratched including the lower spoiler by a Valet car park attendant. They agreed to cover the costs, however the quote I have got to get this done is amazing:

Front Bumper: $2768 (Supply Only)

Front Bumper Lower Spoiler: $2058 (Supply only)

This is without painting. Total repair is $7440.00 with painting, fitting etc. Makes the $999 ebay one quite attractive.

The scratch is not that bad, but the car was new before they did it and as such it is going to be new after the repair.

Lesson: Treat the car with care...repairs are expensive

lol, hope you get to keep the old one too.... then you now have a "track" front end and a "road" front end. or should that be "valet" front end and "Jeff" front end....

I've scratched the bottom of my front lower (lip) spoiler, and i am sure lots more scratches to come!

Out of interest, do you have a part number for the lip spoiler and where can you get them (direct from Nissan?)

Hi guys just thought I would give you a heads up incase you damage you lower spoiler and need to get it replaced. I had my bumper scratched including the lower spoiler by a Valet car park attendant. They agreed to cover the costs, however the quote I have got to get this done is amazing:

Front Bumper: $2768 (Supply Only)

Front Bumper Lower Spoiler: $2058 (Supply only)

This is without painting. Total repair is $7440.00 with painting, fitting etc. Makes the $999 ebay one quite attractive.

The scratch is not that bad, but the car was new before they did it and as such it is going to be new after the repair.

Lesson: Treat the car with care...repairs are expensive

If I ever damage my Lower Spoiler, or maybe even sooner, I am bying a CF one-piece for less than half that price to match my new rear wing and bonnet scoops.

If we added up all the component replacement parts Nissan deems so precious, this car would be worth $10 Million in a knocked down form. Then you pay the dealer $200 per hour to put it all together and it will take them a year....

post-62393-1247205364_thumb.jpg

If I ever damage my Lower Spoiler, or maybe even sooner, I am bying a CF one-piece for less than half that price to match my new rear wing and bonnet scoops.

If we added up all the component replacement parts Nissan deems so precious, this car would be worth $10 Million in a knocked down form. Then you pay the dealer $200 per hour to put it all together and it will take them a year....

post-62393-1247205364_thumb.jpg

whose carbon goodies are those? quality ok?

whose carbon goodies are those? quality ok?

Quality and fit are good. Bonnet scoops on already, rear wing will be done on Saturday.

I will post better pictures in full daylight tomorrow.

I will give everyone vendor details and prices once I know these things actually fit. I don't want to give them any more

business until these pieces are confirmed 100%.

They "cunningly" replicate everything with quite an amazing degree of accuracy and perfect finish at 1/3 -1/2 the price of Mine's, Zele etc..

I don't necessarily want all their CF gear at once, but they have Front Spoilers, Bonnets, Boot Lids, two types of rear wing (OEM type you see here and elevated Mine's-type without centre post and brake light), Front Fenders, Fender vents, Engine Covers, Radiator Covers, Side Skirts, the lot!

post-62393-1247230227_thumb.jpg

post-62393-1247230258_thumb.jpg

post-62393-1247230291_thumb.jpg

Edited by GT-Ricer

Carbon looks great on these cars. I just saw a huge pile of carbon bits waiting to go on a new R35 here in Adelaide.

The guy has purchased just about everything from the password JDM catalog & will look awesome when finished.

Quality and fit are good. Bonnet scoops on already, rear wing will be done on Saturday.

I will post better pictures in full daylight tomorrow.

I will give everyone vendor details and prices once I know these things actually fit. I don't want to give them any more

business until these pieces are confirmed 100%.

They "cunningly" replicate everything with quite an amazing degree of accuracy and perfect finish at 1/3 -1/2 the price of Mine's, Zele etc..

I don't necessarily want all their CF gear at once, but they have Front Spoilers, Bonnets, Boot Lids, two types of rear wing (OEM type you see here and elevated Mine's-type without centre post and brake light), Front Fenders, Fender vents, Engine Covers, Radiator Covers, Side Skirts, the lot!

post-62393-1247230227_thumb.jpg

post-62393-1247230258_thumb.jpg

post-62393-1247230291_thumb.jpg

CF wing on now.

post-62393-1247405416_thumb.jpg

post-62393-1247405597_thumb.jpg

I would never let a vallet take my r35 in the first place. I don't care, Ill eitehr take my daily to a place that has vallet parking or park somewhere else, where I know its safe.

I am usualy that way, but it was a last minute business meeting at a 5 star hotel in the City. I have never had issues before, however to their credit they owned up straight away and showed me where they had damaged the car, they did not wait for me to find it.

I do have a range of cars I could have taken, however I love to drive the R35, it has become my everyday car now...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...