Jump to content
SAU Community

Recommended Posts

Hi guys, have heard that the standard r34gtt cooler fits straight in place of the stock r33 cooler. Can anyone confirm this for me?

Also, I have read that the stock r33 cooler is efficient up to 180rwkw, the r34 cooler is supposedly thicker and more efficient, does anyone know how much power its good for?

Link to comment
https://www.sau.com.au/forums/topic/27956-r34gtt-cooler-into-r33/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hi gts,

yeh I realise its not going to give the gains that a FMIC will but at 1/10 of the price (approx $150 for 2nd hand) it seems to me to be fairly decent value, unless someone knows otherwise.

how much better than r33 one, does anyone have any figures on it (Ive tried a search couple of times but Ive only found general statements bout efficiency).

hey chief i bolted an R34 cooler into mine, straight swap, no problems.

the thicker core may be a slight disadvantage over wider/thinner cores but when the cooler is ducted correctly it shouldn't be a drama. no increase (discernable) in lag is a big advantage and if you are using it as a road car then most I/C's probably work as heat sinks so the extra 60% ?? vol is an improvement.

Responsiveness may beat kW in many situations.

i have no hard figures on the improvements.

i have one on my R33 with the r34 ducting etc to the cooler and the car is also mdded and hasnt pinged or anything strange,

and doesnt seem to care too much

i could notice on my previous R33 when enough was enough and you had to let it cool. so yeah for the small price its worth it, and if you can set up a decent water spray for a few dollars more then thats alot more efficient that stock but yeah still no FMIC

damn right, they are cheap if you sell the old one, but the best bet is to ensure that you have proper ducting of air onto the cooler by sealing all sides and proper venting into the wheel arch. the wheel arch has a negative pressure (as i understand it) therefore you will get good airflow and velocities thru the cooler (remembering it is a thicker core than the '33) if you take the time to cut and mesh this section.

Agreed, its not a perfect solution for peak HP but for most road applications the responsiveness should leave you ahead. Read rev210's posts if you want some validation from a more authoritative source.

  • 11 months later...

Hi guys,

Sorry to bring up an old thread, but I though I would just post my feelings on this topic again.

I just bought and installed an R34 gtt intercooler on my car, I would say that based on my initial impressions, I think it was worth it. :D

Dont get me wrong, Im not seeing masssive differences in power, but I can defiinately feel a significant difference between the new cooler and stock one.

It feels like your upping the boost 0.1bar (or so) more.l As far as actual power differences go I have no idea what sort of improvement I have achieved, but I think that to really notice any difference, you would have to improve power levels by at least 5% so Im assuming were looking at 8-10rwkw.

This is all at 0.7bar mind you, so Im not sure if that makes any difference.

Does anyone have or heard of any real figures on improvements with this sort of upgrade? Would be interested to know.

  • 2 months later...

Hey people, I'm looking at doing this mod if my car doesn't sell quick enough, just to get some extra power :)

How much boost would the R34 intercooler be able to cope with? Note this would be for short bursts just to dart through traffic etc.

12psi? 10psi? I have a good turbo :D

Hey people, I'm looking at doing this mod if my car doesn't sell quick enough, just to get some extra power :)

How much boost on standard turbo would the R34 intercooler be able to cope with? Note this would be for short bursts just to dart through traffic etc.

12psi? 10psi? I have a good turbo :D

12-13psi

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...