Jump to content
SAU Community

Recommended Posts

Hi guys, have heard that the standard r34gtt cooler fits straight in place of the stock r33 cooler. Can anyone confirm this for me?

Also, I have read that the stock r33 cooler is efficient up to 180rwkw, the r34 cooler is supposedly thicker and more efficient, does anyone know how much power its good for?

Link to comment
https://www.sau.com.au/forums/topic/27956-r34gtt-cooler-into-r33/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hi gts,

yeh I realise its not going to give the gains that a FMIC will but at 1/10 of the price (approx $150 for 2nd hand) it seems to me to be fairly decent value, unless someone knows otherwise.

how much better than r33 one, does anyone have any figures on it (Ive tried a search couple of times but Ive only found general statements bout efficiency).

hey chief i bolted an R34 cooler into mine, straight swap, no problems.

the thicker core may be a slight disadvantage over wider/thinner cores but when the cooler is ducted correctly it shouldn't be a drama. no increase (discernable) in lag is a big advantage and if you are using it as a road car then most I/C's probably work as heat sinks so the extra 60% ?? vol is an improvement.

Responsiveness may beat kW in many situations.

i have no hard figures on the improvements.

i have one on my R33 with the r34 ducting etc to the cooler and the car is also mdded and hasnt pinged or anything strange,

and doesnt seem to care too much

i could notice on my previous R33 when enough was enough and you had to let it cool. so yeah for the small price its worth it, and if you can set up a decent water spray for a few dollars more then thats alot more efficient that stock but yeah still no FMIC

damn right, they are cheap if you sell the old one, but the best bet is to ensure that you have proper ducting of air onto the cooler by sealing all sides and proper venting into the wheel arch. the wheel arch has a negative pressure (as i understand it) therefore you will get good airflow and velocities thru the cooler (remembering it is a thicker core than the '33) if you take the time to cut and mesh this section.

Agreed, its not a perfect solution for peak HP but for most road applications the responsiveness should leave you ahead. Read rev210's posts if you want some validation from a more authoritative source.

  • 11 months later...

Hi guys,

Sorry to bring up an old thread, but I though I would just post my feelings on this topic again.

I just bought and installed an R34 gtt intercooler on my car, I would say that based on my initial impressions, I think it was worth it. :D

Dont get me wrong, Im not seeing masssive differences in power, but I can defiinately feel a significant difference between the new cooler and stock one.

It feels like your upping the boost 0.1bar (or so) more.l As far as actual power differences go I have no idea what sort of improvement I have achieved, but I think that to really notice any difference, you would have to improve power levels by at least 5% so Im assuming were looking at 8-10rwkw.

This is all at 0.7bar mind you, so Im not sure if that makes any difference.

Does anyone have or heard of any real figures on improvements with this sort of upgrade? Would be interested to know.

  • 2 months later...

Hey people, I'm looking at doing this mod if my car doesn't sell quick enough, just to get some extra power :)

How much boost would the R34 intercooler be able to cope with? Note this would be for short bursts just to dart through traffic etc.

12psi? 10psi? I have a good turbo :D

Hey people, I'm looking at doing this mod if my car doesn't sell quick enough, just to get some extra power :)

How much boost on standard turbo would the R34 intercooler be able to cope with? Note this would be for short bursts just to dart through traffic etc.

12psi? 10psi? I have a good turbo :D

12-13psi

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...