Jump to content
SAU Community

Recommended Posts

Hey all

I need a cheap helmet in the east/inner east. To suit low speed shit such as DECA. Have a cage which it would impact in a crash, dunno how much difference that is too trim...

On a tight budget for now, if I start doing higher speed stuff(Just plan on doing DECA's and maybe some beginner drift days and some driver training days) I would look into a higher quality helmet(once I sell the Stagea).

So, Where close-ish to Toorak(or CBD where I work) can i get once of these $135ish helmets I have heard of people speaking of?

Thanks,

Ryan

Edited by RB_Ryan
Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/
Share on other sites

dunno man. most bike shops sell a KBC model thats about the 179 buck range. shit doesn't fit right me though. so have decided to save a bit more and shop with a higher budget. places i looked at are all around dande or revolution racegear who are in nunawading/mitcham

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4731019
Share on other sites

you can have mine if you want - i think i paid something like 230 for it, but only been used twice. PM me if you want it.

edit - willing to let it go for about $150 - and I bought it from Mick Hone Motorcycles

have to pass sorry, could of borrowed a helmet for the day, but i am a bit funny about my head being inside things that get sweated in...

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4731162
Share on other sites

have to pass sorry, could of borrowed a helmet for the day, but i am a bit funny about my head being inside things that get sweated in...

its cos im black isnt it! ;)

j/k - yeah its all cool man. If you change your mind, let me know.

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4731225
Share on other sites

Elizabeth street has a few motorbike stores...RXT brand helmets (full face) can be had for about $100-$150, and that was a while ago so might be more/less now...Can also get them on EBay. They'll do the job.

thats what i was thinking, and i work just near there

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4731241
Share on other sites

It might be a bit different in cars because you have other protections to help you out (seatbelt/harness, rollcage etc.), but I still wouldn't be skimping on a helmet. You can't buy another head. The helmet I bought for my motorbike cost $400-500 and that was by motorbike standards good value. Should never buy second hand either...no offence to people selling their helmets but a buyer will never know what the helmet has been involved in - and after a single serious hit with a helmet you are supposed to replace it (even dropping it from a metre on a hard surface can damage it) with a new one because the impact absorbing structure is a once off thing.

Alot of manufacturers also recommend you don't paint or put decals on your helmet unless they are approved materials because there are chemicals and adhesives that can seep through and damage it.

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4731898
Share on other sites

As long as they meet the Aus standard, your fine safety wise.

Where the more expensive helmutts come into play is comfortableness, weight, and that kinda thing.

Pickup a $100 helmutt and then a $700 one and you'll see what i mean. Then press the foam etc inside it and again you'll see :P

Also the cheaper ones dont generally 'conform' as well as the more expensive ones. You really should only ever wear your own helmet as overtime the foam form fits to your head etc.

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4731913
Share on other sites

As long as they meet the Aus standard, your fine safety wise.

Where the more expensive helmutts come into play is comfortableness, weight, and that kinda thing.

Pickup a $100 helmutt and then a $700 one and you'll see what i mean. Then press the foam etc inside it and again you'll see :P

Also the cheaper ones dont generally 'conform' as well as the more expensive ones. You really should only ever wear your own helmet as overtime the foam form fits to your head etc.

This post pretty much sums it up.

Wind and road noise is also a factor when you buy a motorbike helmet. The more expensive they are the more noise they reduce.

As long as the helmet meets Aus standards you'll be fine.

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4732218
Share on other sites

Thanks Ash, answered my question... I went into one of the bike shops on Elizabeth street today and when I asked if these $150 helmets were actually any good, he just pointed to the Aus Standard sticker. That in addition to Ash's advice and I think I have myself a nice cheap helmet.

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4732756
Share on other sites

As long as they meet the Aus standard, your fine safety wise.

Where the more expensive helmutts come into play is comfortableness, weight, and that kinda thing.

Pickup a $100 helmutt and then a $700 one and you'll see what i mean. Then press the foam etc inside it and again you'll see :D

Also the cheaper ones dont generally 'conform' as well as the more expensive ones. You really should only ever wear your own helmet as overtime the foam form fits to your head etc.

+1. i was looking 4 helmets with a $200 budget. then got bored and tried on a shoei. am now saving

Link to comment
https://www.sau.com.au/forums/topic/280414-helmets/#findComment-4733095
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...