Jump to content
SAU Community

Recommended Posts

whats the 910 for? are you using it for a lift pump? you will need at least two if you are using it for a main pump.

will you make anzac day or is it too soon?

ool, thanks for that Matt :)

Well 2 Dunlop Slicks turned up at my work yesterday :laugh: Thanks to a Mr John Pelingon

aswell as a Bosch 910 External fuel pump and bracket, So im sorting out fuel lines and stuff now...might have to modify my surge tank though as the 910 has a 13.5mm feed fitting and my surge tank is 3/8 from memory.

So now im just waiting on another SAU NSW'er to sell his rims so i can grab 4 more Dunlop slicks.

So really all I have to do is tidy a bit of wiring, dry-ice the interior and mount the harness and ill be out on track:

Oh that reminds me...does anyone know of a bolt in Harness bar for the skylines?

Thanks

Andrew

  • Replies 340
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

whats the 910 for? are you using it for a lift pump? you will need at least two if you are using it for a main pump.

will you make anzac day or is it too soon?

Dammit, Dont say that..i was under the impression that the 910 would flow enough for what i need.

Might have to get a 2nd one then :)

Unsure on Anzac day atm ill be at wakefild the day before marshalling for MRA.

I will let you know asap though :_)

whats the 910 for? are you using it for a lift pump? you will need at least two if you are using it for a main pump.

will you make anzac day or is it too soon?

Isn't the 910 the new 044? If so on pulp it should handle it fine.

  • 3 weeks later...

A New toy turned up today, Thanks to stevo :P

Also going to play with the car a bit on the weekend, going to make up some ign coil mounts, and buy some ign leads to suit the holden v6 coils ill run for a little while.

I may have a chance to look at the harness mounts.

LT12s5.jpg

LT12s1.jpg

Plazmaman make a good looking water to air kit

I'm using one on the supra when I get around to modding that. I'm looking forward to stable inlet temps! Also I'm a huge fanboy of throttle response so reducing intercooler pipe length can't hurt that at all

I don't actually, if memory serves me I had to get one from a computer store, or maybe microtech direct. Hard to remember that long ago sorry

I like the plazaman heat exchangers better though, but for the price difference it's probably not worth the effort and expense of mixing and matching kits!

I've just had a big look around the house for it, definatly not here

the plazaman ones look like the heat exchanger has a better design and better sizes, also their pumps look really, really good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...