Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

My ceffy's become my daily. Looking into liquified LPG injection. Got a kit stuck in QLD that I've gotta bring down to melb before I can paint it and put it on. Gotta find some hubcentric spacers to bring out my front wheels a lil, and fit a pair of S14 LCA's, steering rack spacers, and S2 tail lights i've got for it.

mines got rb25 turbo on, but doing it all properly, not just slappin' it on, made up silicon intake pipe with some aluminium reinforcing throughout

made up a custom airbox with ducting

chucking on split/screamer for some truck loving

bought some work ryvers, 17's with +35 offset with 15mm spacers on front (rears stick out wicked ways)

chuckin a 044 pump in

should be a mean little 20

Mine just sits in the garage gathering dust. only seem to drive once a fortnight...

Not even worth having really.

Put my new steerin wheel on....Does anyone know how to reset the steering angle sensor??

Stupid Hicas

sitting in the paddock with no engine or box,

waiting for my crank and sump, so we can assemble the engine and get it up and running finally!!

gate wait to hear the turbo spool and gate crack open!

once thats done its onto the body work,that will be another task in itself!

Mines in the driveway with a broken window reg on the drivers door. Got a multitude of parts sitting in boxes but no where near enough motivation to get the jack underneath the car. Also trying to save for a house deposit makes me consider things like selling the cefiro and getting a track only rig.

Mine just sits in the garage gathering dust. only seem to drive once a fortnight...

Not even worth having really.

Put my new steerin wheel on....Does anyone know how to reset the steering angle sensor??

Stupid Hicas

If you figure out how to align up the steering angle sensor without CONSULT, let me know - I got the same issue with my HICAS being out of whack cos the steering sensor isn't centered properly ;)

mines my daily....thinking of getting rid of the minispool and going back to LSD.....for some reason i always need tyres for the back :angry: . Hoping for something after the tax is done so i can get a remap, malpassi and retune...still hunting that 200kw.....auto trans is still performing flawlessly too

...still got it - it's in the shed.

RB26 head acquired, 6boost manifold, tial wastegate, new gt3076r, plus a few little odds and ends... Car is completely stripped (again) had full cams roll cage welded in which also extended through the firewall to the strut towers and engine bay seam welded... now to get off my lazy ass and get sanding cleaning to paint interior and get sunroof hole welded up..........

all in good time. just need more moneyzzzz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...