Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

btw if i do a manual conversion do i need to change anything to my papers?

Yes, you need to notify VicRoads. If your make/model came with that gearbox from factory (as is the case) that's I as far I know - no engineering, inspection etc. required. Can someone else confirm this though?

called them just now.they are gona get back to me.hopefully i will get the similar price.

@v28vx37.if you get a better quote from someone please let me know thanks.

No worries, will do. Let us know if you end up getting this done at Advanced and how you go.

they called me back and gave me the same quote as well.they said it will take 2 days.but they said there is no warranty or anything on the gearbox.i will get that done i guess just depends on how long it take to sell my r32.going to post it up tomorrow. hahah.

i am still not clear about the vicroads thing so i will call them and let you know.if u have any update plz pm me.thanks.

might be using 33 parts though?

though i understand its just the bell housing, ask if push/pull clutch.

My quote was with an R34 gearbox so I'd assume Deathvalley's is the same, but good to check.

Edited by V28VX37

i think it is from a r34 not a r33.

the price breakdown actually was 1900 for the gearbox and he sais 700-800 for puting it on.but then i said i m not just geting a quote i m going to do it so give me a better price. he said its a bit negotiable.

so i m thinking 2400-2500.

but i saw a lot of gearboxes for sell for 1500 on ebay and gumtree and if labour costs 500-600 that should be a cheaper option.but i am not sure if that is good way to get this thing done.

what do you guys say?

... the price breakdown actually was 1900 for the gearbox and he sais 700-800 for puting it on. ...

I think you mean 1900 for the conversion kit, including the gearbox?

Keep in mind conversions are more than just bolting on a gearbox. Pedal box, clutch master and slave, ecu, dash trim etc.

Indeed, there's quite a few parts that are needed for this.

The lack of warranty is a concern, but then again it's a used box... Hmm. I wonder if anyone does gearbox inspections in Melb? More $$ again though but I'd really hate put a busted box in and pay for the box and labour twice.

It's really hard to inspect a gearbox beyond the drained oil and the feel of the box when driving. You can pull extension housing off, but most gearbox mechanics won't want to touch it further than that. They are one of those...once you pull it apart...you can upset it and create more problems/sounds than it had before. A thorough inspection would require you to replace the bearings and seals in it, i.e. essentially a recondition anyway.

Be wary that a lot of second hand boxes can have shockproof oil put in them, to silence cranky synchros etc.

It's really hard to inspect a gearbox beyond the drained oil and the feel of the box when driving. You can pull extension housing off, but most gearbox mechanics won't want to touch it further than that. They are one of those...once you pull it apart...you can upset it and create more problems/sounds than it had before. A thorough inspection would require you to replace the bearings and seals in it, i.e. essentially a recondition anyway.

Be wary that a lot of second hand boxes can have shockproof oil put in them, to silence cranky synchros etc.

Interesting, thanks for this tips. So there isn't much else one can do besides trusting the seller's word that it's a good condition box? What does a recondition cost?

the guy did tell me that if he puts in a gearbox and sees that its not in perfect condition he will straight away change it and put in a new one.but then again its not much of an assurance so i guess we just have to take the mechanics word for it.

Interesting, thanks for the update. I've sought quotes from a couple of other places but haven't heard back much, I don't think many workshops are overly keen on conversions...

If you decide to go ahead with it test and make sure all mechanical and electrical features work 100% after the conversion: ABS, TCS, VCT, custom tune, boost control, speedo, air con, alarm, low idle 800rpm, no warning lights in dash etc.

  • 1 month later...

@v28vx37 sure mate.i will keep you updated.if u get a better quote from some one else please also let me know.i put up my 32 for sell yesterday.hopefully it will sell so and i will be able to go forward with the conversion.

How'd you get on with this Deathvalley?

I called Advanced Jap Auto again this week and apparently they have recently sold their last conversion kit so back to the drawing board. I can't find anyone else in Melb who would do a drive-in-drive-out job, so I'm now thinking I'll need to collect the parts off eBay and/or forums and just get someone to do the install. Might save a couple of $ but more messy that way..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...