Jump to content
SAU Community

Recommended Posts

ive just blocked off my stock bov, NOT for the hektik flutterz yo but so i can use the gasket to trace out an adapter plate to mount a bov on my intercooler piping when i put that in.

so im gna be driving the car round like this for a few days, is it normal to get a rough idle with the bov blocked? and is it normal for my car to sound like a rex and feel really rough until about 2.5-3k rpm?

cheers!

Link to comment
https://www.sau.com.au/forums/topic/281813-my-skyline-sounds-like-a-wrx/
Share on other sites

You blocked off the return pipe from the BOV back to the intake right?

And as if it's not for hektik flutterz. You could just remove the gasket, trace it, and put it back on. But you have chosen to drive it around for a 'few days' like this. I'm calling you out as a ricer!

do u mean that smallish hose from the top of the bov to the side of the plenum? coz no i havnt touched that, all ive done is put a solid gasket between the bov and mount.

damn u cought me out ! lol i hate myself for saying this but it sounds awsome, its only for a few days but, i swear!

do u mean that smallish hose from the top of the bov to the side of the plenum? coz no i havnt touched that, all ive done is put a solid gasket between the bov and mount.

Thats part of your problem your problem, but he is talking about the Bov re-circ hose that goes down to the intake pipe.

i blocked off that top hose didnt really do much, the other hose was in a too tight position to block off. its onli gna be like this for a day so shud be alright

No, it'll foul the spark plugs.

There are two hoses. One large one (approx 1 inch diameter) that goes back in front of the turbo, and the vacuum hose that went to the top of the valve. You need to block both

thanks for the heads up :) i just ended up tracing the original gasket onto some cardboard on putting it back in, less hassles

also noticed a coilpack plug was disconected but it may have happened after wen i was fiddling round with the bov. the car did sound tuff hahaah but definatly didnt sound normal

, thanks guys

i am running a blocked off stock BOV and never had a problem at all.....al the hoses are still connected and in place as they were before.....all i did was put a metal plate in between the BOV and the mount.....flutters nicely and no problems.....mind you dont get any flutter when it hits 12psi only on low boost it will flutter

um.... why would you want to move the bov? the stock bov is in the ideal location. nice and close to the throttle body.

Yer i would of thought that. Using the stock posstion is good. You will need the plum back pipe from the bov to the intake in front of the turbo other wise yes it will run like a dog.

Ive tried this trick once before on my old RB20 and it didnt like it at all. Hooked the bov back up with plum back pipe, all good again.

I would stay with the origanal bov or do a search on ebay for a aftermarket one with plumback support.

You blocked off the return pipe from the BOV back to the intake right?

And as if it's not for hektik flutterz. You could just remove the gasket, trace it, and put it back on. But you have chosen to drive it around for a 'few days' like this. I'm calling you out as a ricer!

bov was the old rice now flutter.. hmm

Sigh@flutters, its the most annoying noise on the planet, specialy wene u see a nice skyline or any car realy and the accelorate near u and make that gay noise - fail

no actually it's more embarresing when my bov goes and everyone turns around and looks at u and says rice.

You would have solved your problem when you reconnected the coil pack as you car would have been running on 5 cylinders and misfiring.

The WRX sound of a skyline usually points to coilpacks or plugs as it is a misfiring sound.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...