Jump to content
SAU Community

Recommended Posts

Just got the prices for servicing from Von Bibra yesterday

10000km - $600

20000Km - $600

30000Km - $2500

Pre and Post race day

Pre race day - $450

this includes

1. Wheel alignment

2. Download of computer information

3. Engine oil level reduction

4. Brake fluid level reduction and bleeding of system

5. Power steering fluid level reduction

6. Aluminum tape over wheel weights

Post race day - $600

1. Wheel alignment

2. Brake fluid changed

3. Download of computer informaiton

4. Top up of power steering fluid

5. Removal of wheel weight protection tape

?? Transmission oil change (cost not covered)

?? brake rotors and pads change (cost not covered)

I wonder whether they mind me taking my RX7 for the GTR trackday instead :blink:

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/
Share on other sites

Considering the 10K service is an oil and filter change with a few "inspections" seems a bit steep to me even when we're not talking trans fluid change...... Would love to know what they charge for oil. I used to supply my own oil to the Subaru service dept, save money and still get a better oil than what they would have been providing.

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4758600
Share on other sites

Pre track inspection is not mandatory. For the post

track day inspection, about $370 is for flushing brake fluid. Bugger that. Surely they can't enforce that for engine transmission warranty. That leaves $220 for hooking it up to the computer and poking around under the car. That's what I'll argue for.

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4765099
Share on other sites

Pre track inspection is not mandatory. For the post

track day inspection, about $370 is for flushing brake fluid. Bugger that. Surely they can't enforce that for engine transmission warranty. That leaves $220 for hooking it up to the computer and poking around under the car. That's what I'll argue for.

I thought both pre and post track inspeciton are compulsory?

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4768433
Share on other sites

Pre and Post race day

Pre race day - $450

this includes

1. Wheel alignment

2. Download of computer information

3. Engine oil level reduction

4. Brake fluid level reduction and bleeding of system

5. Power steering fluid level reduction

6. Aluminum tape over wheel weights

:huh:

Umm, why are they REDUCING the important fluids in your car before a track day? That just seems a bit silly to me...

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4768958
Share on other sites

:huh:

Umm, why are they REDUCING the important fluids in your car before a track day? That just seems a bit silly to me...

Weight saving strategy? ha ha

There is probably some method behind the madness. But i would put i in the same bucket as nitrogen filled tyres. Basically a wank for casual weekend warrior stuff.

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4769151
Share on other sites

:)

Umm, why are they REDUCING the important fluids in your car before a track day? That just seems a bit silly to me...

Engine fluid is reduced to decrease oil pressure, as when racing the oil temperature rises and the increased oil pressure could potentially burst pipes

:blush:

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4770309
Share on other sites

Engine fluid is reduced to decrease oil pressure, as when racing the oil temperature rises and the increased oil pressure could potentially burst pipes

:)

I would have thought increased oil temp would reduce viscosity and therefore reduce oil pressure. Oil pressure is usually managed by a regulator/bypass system when oil is cold and by engine clearances when engine is hot.... Also how would reducing the oil level reduce oil pressure short of reducing it so far the oil pickup doesnt "pick up". Which I hazard would create a catastrophic reduction in oil pressure. My only concern with reducing the oil level is the risk of oil surge under hard braking/cornering. However I cannot imagine running the car at the H level will create excessive windage that will aerate the oil. I imagine the Nissan engineers looked after that with good sump baffling etc. I'd always erron the side of more full than more empty...I'm sure Martin could shed some light on this topic...

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4770722
Share on other sites

Lol do they ever top the oil back up or do they just take more and more out every track day you go to until your engine siezes? Its so stupid that they can get away charging rediculous prices for the exact same stuff that is done to any car for a lot less. I have been servicing my car for quite a few years now and it costs me 1/3 that of what most places want to do simple tasks. Here is a question, do JRM R35's get no support in aus? Like if you need any factory work done will they refuse your car because it was imported?

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4772091
Share on other sites

Lol do they ever top the oil back up or do they just take more and more out every track day you go to until your engine siezes? Its so stupid that they can get away charging rediculous prices for the exact same stuff that is done to any car for a lot less. I have been servicing my car for quite a few years now and it costs me 1/3 that of what most places want to do simple tasks. Here is a question, do JRM R35's get no support in aus? Like if you need any factory work done will they refuse your car because it was imported?

that's where the post-inspection comes in ..... open up the oil filler cap, pour in the oil and voila $600 please ...... i think both Moorooka and GC dealer says they dont deal with JDM cars, but i maybe if ur willing to pay more? money talks

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4773191
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...