Jump to content
SAU Community

Recommended Posts

Just got the prices for servicing from Von Bibra yesterday

10000km - $600

20000Km - $600

30000Km - $2500

Pre and Post race day

Pre race day - $450

this includes

1. Wheel alignment

2. Download of computer information

3. Engine oil level reduction

4. Brake fluid level reduction and bleeding of system

5. Power steering fluid level reduction

6. Aluminum tape over wheel weights

Post race day - $600

1. Wheel alignment

2. Brake fluid changed

3. Download of computer informaiton

4. Top up of power steering fluid

5. Removal of wheel weight protection tape

?? Transmission oil change (cost not covered)

?? brake rotors and pads change (cost not covered)

I wonder whether they mind me taking my RX7 for the GTR trackday instead :blink:

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/
Share on other sites

Considering the 10K service is an oil and filter change with a few "inspections" seems a bit steep to me even when we're not talking trans fluid change...... Would love to know what they charge for oil. I used to supply my own oil to the Subaru service dept, save money and still get a better oil than what they would have been providing.

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4758600
Share on other sites

Pre track inspection is not mandatory. For the post

track day inspection, about $370 is for flushing brake fluid. Bugger that. Surely they can't enforce that for engine transmission warranty. That leaves $220 for hooking it up to the computer and poking around under the car. That's what I'll argue for.

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4765099
Share on other sites

Pre track inspection is not mandatory. For the post

track day inspection, about $370 is for flushing brake fluid. Bugger that. Surely they can't enforce that for engine transmission warranty. That leaves $220 for hooking it up to the computer and poking around under the car. That's what I'll argue for.

I thought both pre and post track inspeciton are compulsory?

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4768433
Share on other sites

Pre and Post race day

Pre race day - $450

this includes

1. Wheel alignment

2. Download of computer information

3. Engine oil level reduction

4. Brake fluid level reduction and bleeding of system

5. Power steering fluid level reduction

6. Aluminum tape over wheel weights

:huh:

Umm, why are they REDUCING the important fluids in your car before a track day? That just seems a bit silly to me...

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4768958
Share on other sites

:huh:

Umm, why are they REDUCING the important fluids in your car before a track day? That just seems a bit silly to me...

Weight saving strategy? ha ha

There is probably some method behind the madness. But i would put i in the same bucket as nitrogen filled tyres. Basically a wank for casual weekend warrior stuff.

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4769151
Share on other sites

:)

Umm, why are they REDUCING the important fluids in your car before a track day? That just seems a bit silly to me...

Engine fluid is reduced to decrease oil pressure, as when racing the oil temperature rises and the increased oil pressure could potentially burst pipes

:blush:

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4770309
Share on other sites

Engine fluid is reduced to decrease oil pressure, as when racing the oil temperature rises and the increased oil pressure could potentially burst pipes

:)

I would have thought increased oil temp would reduce viscosity and therefore reduce oil pressure. Oil pressure is usually managed by a regulator/bypass system when oil is cold and by engine clearances when engine is hot.... Also how would reducing the oil level reduce oil pressure short of reducing it so far the oil pickup doesnt "pick up". Which I hazard would create a catastrophic reduction in oil pressure. My only concern with reducing the oil level is the risk of oil surge under hard braking/cornering. However I cannot imagine running the car at the H level will create excessive windage that will aerate the oil. I imagine the Nissan engineers looked after that with good sump baffling etc. I'd always erron the side of more full than more empty...I'm sure Martin could shed some light on this topic...

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4770722
Share on other sites

Lol do they ever top the oil back up or do they just take more and more out every track day you go to until your engine siezes? Its so stupid that they can get away charging rediculous prices for the exact same stuff that is done to any car for a lot less. I have been servicing my car for quite a few years now and it costs me 1/3 that of what most places want to do simple tasks. Here is a question, do JRM R35's get no support in aus? Like if you need any factory work done will they refuse your car because it was imported?

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4772091
Share on other sites

Lol do they ever top the oil back up or do they just take more and more out every track day you go to until your engine siezes? Its so stupid that they can get away charging rediculous prices for the exact same stuff that is done to any car for a lot less. I have been servicing my car for quite a few years now and it costs me 1/3 that of what most places want to do simple tasks. Here is a question, do JRM R35's get no support in aus? Like if you need any factory work done will they refuse your car because it was imported?

that's where the post-inspection comes in ..... open up the oil filler cap, pour in the oil and voila $600 please ...... i think both Moorooka and GC dealer says they dont deal with JDM cars, but i maybe if ur willing to pay more? money talks

Link to comment
https://www.sau.com.au/forums/topic/282658-servicing-fees/#findComment-4773191
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...