Jump to content
SAU Community

Recommended Posts

Hi guys im new to this forum

Starting on this new project..and would like your thoughts/comments.

Not going too crazy with the mods:

R33 Gtst gearbox

S14a rear diff

HKS 28/35 TURBOS

upgraded fuel system etc..

custom fab for intercooler and piping

Car is at Advan, expect a 4-6 month build, will post photos of the build

Link to comment
https://www.sau.com.au/forums/topic/284360-rb26-powered-s15/
Share on other sites

would like some feedback about the Hypertune plenum also......

may have issues clearing clutch master... ooh and say goodbye to the nice chassis balance you had with the SR :D

You can use a gtr style radiator cooler and piping kit, no need for custom if your budget is stretched. Here are some pics of the old setup (T517Z, GTR radiator, cooler kit and piping kit unmodified). I will post up the latest pics 2moro with the K5 and greddy plenum (which fouls the clutch slave badly).

20070522_6fffa7bb2343b5bfd85e4W2hae.jpg

20070522_21302eaff9157edb2abeQtGZXa.jpg

Edited by URAS
x2. Friend of mine has one with a monster turbo set up on it, he can barely make 1/2 throttle in 4th without it smoking the rears up.

Very cool, but IMHO very pointless if you cant enjoy that power.

Smoking 4th at 1/2 throttle could be a very enjoyable way to use the power..

x2. Friend of mine has one with a monster turbo set up on it, he can barely make 1/2 throttle in 4th without it smoking the rears up.

Very cool, but IMHO very pointless if you cant enjoy that power.

4th gear wheel spin at half throttle??? this i need to see to believe

4th gear wheel spin at half throttle??? this i need to see to believe

Ok i tell a tall tale slightly. It was on a damp racetrack :)

Every time he went passed i was waiting for full boost, gentle 2nd, gentle 3rd spool spool, 4th, spool spool smoke smoke sideways sideways, back off.

Put it into the kitty litter once and buried it up to the sills :)

Cant remember the exact specs, but it did have a reasonably large high mount. So im guessing the lag, and maybe sudden power doesnt help? Not sure.

It was very easy to keep up with him in my stock turbo R33. Most amazing thing to watch tho ever time he got on the power it just spun the wheels, made orgasmic noises and didnt get any further infront of me haha

I can believe it would turn tyres.

Mine would turn coming onto boost in 3rd with 370rwkw and that was just on the freeway, just as it ramped up - traction disappeared.

And my grip is quite good (280rwkw, never brakes traction at all unless im savage in 1st to 2nd gearchange)

So with 2835's you are looking at worse than what i was getting.

here are the pics with the larger plenum, rear of plenum fouls the clutch master and both require about 3mm worth of shaving (6mm total). I also slotted the engine mounts and carriers.

please bear in mind the car is dummied together for dynoing and is not complete and tidy.

post-34927-1251246306_thumb.jpg

post-34927-1251246357_thumb.jpg

Ok i tell a tall tale slightly. It was on a damp racetrack :P

Every time he went passed i was waiting for full boost, gentle 2nd, gentle 3rd spool spool, 4th, spool spool smoke smoke sideways sideways, back off.

This is the T51R SPL RB26 one that was at Taupo? Its not very sensible :) Yeah RWD with over 400rwkw without drag radials isn't a good idea, Ashleys 25t on normal road tyres had no traction in 1st, 2nd and 3rd and the increase in traction in 4th actually made it seem more dangerous than the lower gears. Something very unnerving about passing 160kph and the back end starting to wander!

This is the T51R SPL RB26 one that was at Taupo? Its not very sensible ;) Yeah RWD with over 400rwkw without drag radials isn't a good idea, Ashleys 25t on normal road tyres had no traction in 1st, 2nd and 3rd and the increase in traction in 4th actually made it seem more dangerous than the lower gears. Something very unnerving about passing 160kph and the back end starting to wander!

Yeah i guess thats the one Lith! White?

Dam impressive car. Looks amazing too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...