Marko R1 Posted August 28, 2009 Share Posted August 28, 2009 tuning my pfc alone, i spent $1400 Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4794967 Share on other sites More sharing options...
s13_Skyline_inside Posted August 29, 2009 Share Posted August 29, 2009 as sais haltec platinum for the rb30 retail at 2k or so without a tune, and wholesale isnt exactly under 1600 so theres alot of the 5k there, you could just swap over the block and go from there Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4795724 Share on other sites More sharing options...
astrotristan Posted August 29, 2009 Share Posted August 29, 2009 just a thought to add.. i think there is a reason there arent an abundance of cheep 300kw rb30s driving around.. post up the quote mate when u get it Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4795817 Share on other sites More sharing options...
Duncan Posted August 30, 2009 Share Posted August 30, 2009 as for driving a 300kw car, unfortunately 400 is the new 200, and like arseholes everyone has one now. the fact is 300kw is damn fast and there are very very few times you can use more than 300kw. as for getting it built for $5k as trent said it is possible, and it's not necessarily impossible. But you will need to do stuff the cheap way....which I'm always happy to do:D Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4797301 Share on other sites More sharing options...
TiTAN Posted August 30, 2009 Share Posted August 30, 2009 The difference there duncan is that you are happy to do it the cheap way because you know you are going to break it anyway, he doesnt want it to break Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4797496 Share on other sites More sharing options...
rb2? Posted August 31, 2009 Author Share Posted August 31, 2009 yeah im after a reliable build, ive been doing a lot of researching and brainstorming aswel tryin spend the money wisely. Had another talk to the workshop that offered me the price but not quite 100% on his 2nd bits, as i have been through that path already. No sunset on the horizon yet, i just wonna spend the money on all the right places guys... Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4798834 Share on other sites More sharing options...
psi Posted August 31, 2009 Share Posted August 31, 2009 If your slap happy.. RB30 bottem end $100 (or less) Not rebuilt Holset turbo 2nd hand $500 (HX35 or HX40) use standard manifold ECU and tuning $2500~3500ish?? Do you see where i'm going with this?? Sure, it wont be pritty, it will take a reasonable amount of abuse and costs will be very low. ..and the best bit, everybodies jaw will hit the floor when you tell them how much it DIDN'T cost! That will always be priceless! Be no means the best way of building good power.. but, with some 'out side the box' thinking, do-able. Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4798845 Share on other sites More sharing options...
TiTAN Posted August 31, 2009 Share Posted August 31, 2009 the issue there is he has said he wants a RELIABLE build for 300kw and you just cant assure that with a stock 200,000k motor that you haven't even opened. Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4798882 Share on other sites More sharing options...
boostin31 Posted September 1, 2009 Share Posted September 1, 2009 If your slap happy..RB30 bottem end $100 (or less) Not rebuilt Holset turbo 2nd hand $500 (HX35 or HX40) use standard manifold ECU and tuning $2500~3500ish?? Do you see where i'm going with this?? Sure, it wont be pritty, it will take a reasonable amount of abuse and costs will be very low. ..and the best bit, everybodies jaw will hit the floor when you tell them how much it DIDN'T cost! That will always be priceless! Be no means the best way of building good power.. but, with some 'out side the box' thinking, do-able. Spot on mate, what is this rebuilding the bottom end shit? just slap the head on the stock 30 bottom end and away you go! Probably pick up a 3540 for 1200, a 2nd hand microtech or wolf for around a thousy, tune set you back 600 or so bucks then injectors and a pump about another thousand. its very doable for that price range, especially if you do the work yourself the issue there is he has said he wants a RELIABLE build for 300kw and you just cant assure that with a stock 200,000k motor that you haven't even opened. People have been making waaaaay more than 300kw on stock 30 bottom ends with hundreds of thousands of k's on them! Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4800974 Share on other sites More sharing options...
TiTAN Posted September 1, 2009 Share Posted September 1, 2009 Some people have been lucky enough to make more than 300kw on the stock bottom end and others have not been as fortunate. there is no guarantee that the stock bottom end will hold as is. Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4801130 Share on other sites More sharing options...
Duncan Posted September 1, 2009 Share Posted September 1, 2009 ahh I don't think there is any such things as a guarantee that any bottom end will ever hold Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4801984 Share on other sites More sharing options...
Marko R1 Posted September 1, 2009 Share Posted September 1, 2009 Some people have been lucky enough to make more than 300kw on the stock bottom end and others have not been as fortunate. there is no guarantee that the stock bottom end will hold as is. my 1st rb26 bottom end let go after a few mths on 362awkw, aust delivered gtr with only 90000km my recent rb26 also let go after a few mths on 320awkw both engines were stock so be prepared for the day when it happens, it is inevitable Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4802447 Share on other sites More sharing options...
psi Posted September 2, 2009 Share Posted September 2, 2009 every known mechanical device has a breaking point. Some engines are just freaks (either way) and live forever or break with no known (or understood) reason. So, I go straight back to my last statement! Sure, you can spend large lumps of $$ on an engine that only makes 300kw, and yes it will keep doing that until it is worn out. or, you can just say 'bugger it' its gonna break sooner or later and save the extra $$ and do it again in 6 months or 6 years time if or when the things goes bang. So, to answer the question, yes, it is possable. May not be the way I would do it.. or you.. or half the guys on here. But do-able none the less... Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4804270 Share on other sites More sharing options...
GT-RZ Posted September 2, 2009 Share Posted September 2, 2009 But if you do it that way just pray that it doesn't destroy something that will cost you allot more to fix next time. you can get bargains on rods and pistons these days and if i was to leave it stock id at least be getting new rings/bearings and a hone. Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4805056 Share on other sites More sharing options...
CEF11E Posted September 3, 2009 Share Posted September 3, 2009 As PSI said it can be done and mine is an example. standard bottom rebuilt with new bearings, rings and seals. $800 RB25DE VCT head - $500 oil lines, tensioners, timing belt - $300 RB 25 hiflowed injectors - $350 Z32 AFM - $250 Holset HX35 - $500 Standard manifold modified to take external gate - $350 Custom dump pipe, piping and silicon joiners - $300 coilpacks, pick your brand these days - $400 ECU remapping - $500 Fuel pump - $200 all this costs just short of 4.5g and is the bare bones prices. you will make 300rwkw with these mods and it will be reliable but I wouldn't want to push it much further. this is a ball tearer of an engine/turbo combo! this does not count the gearbox you will smash or the expensive clutch. nor will you get 300rwkw to the ground neatly without a mechanical lsd Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4805884 Share on other sites More sharing options...
zebra Posted September 3, 2009 Share Posted September 3, 2009 My main concern with a elcheapo rb30 built at 300rwkws would be having it live at the track...might last 10years on the street but could go pop within the first lap on a track...and I dont see the need to have 300rwkws in a car if its only going to see the street. The OP said he drifted..how much 300rwkw limiter bashing will a stock 30 take? not that much i would say Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4805899 Share on other sites More sharing options...
GT-RZ Posted September 3, 2009 Share Posted September 3, 2009 I agree i think the drift engines get a really bad time! Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4806250 Share on other sites More sharing options...
CEF11E Posted September 3, 2009 Share Posted September 3, 2009 depends, Limiter bashing kills oil pumps and you really dont need to rev a 30 that hard. setting the limiter to 6300 is fine even for long tracks (not often you see over 230kmph) and for drift you simply use a good oil pump in them not an rb30e item. Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4806286 Share on other sites More sharing options...
zebra Posted September 3, 2009 Share Posted September 3, 2009 true, but a "good" oil pump is over $1200 Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4806290 Share on other sites More sharing options...
4dr taxi man Posted September 6, 2009 Share Posted September 6, 2009 hey im doing the same thing atm, ive already stripped the rb30e and i reccon i can build a 250rwkw 25/30 for 5grand or under. but im a mechanic and my dads a fitter and turner so we can make so much gear ourselves its just the time factor of making manifolds and cooler pluming and exhaust but itle be done i reccon ill have my whole track car going within 6 months. ill keep u posted on how my build is going if u like? Link to comment https://www.sau.com.au/forums/topic/285171-5k-300kw/page/2/#findComment-4810570 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now