Jump to content
SAU Community

Recommended Posts

I think there was another post about this floating around, but stumbled upon this article on the actual car as well as some rather top photos (unfortunately pretty small ones).

Kid's Heart R35 Wagon

2009-gtr-f34-nissan-fe-500-2.jpg

(Apologies if the article has been posted before, a quick search didn't come up with anything...)

Link to comment
https://www.sau.com.au/forums/topic/287316-kids-heart-gtr-m35-wagon-article/
Share on other sites

Seen the pics before, never read the article, so thanks for that.

i now need some quality "alone" time after this little tidbit..

Kids Heart could have built this off the all-wheel-drive M35 Stagea, which comes with a turbocharged, 276-hp 2.5-liter VQ25DET V6. But because the people at Kids Heart are truly wild at heart, they've stuck with the rear-wheel-drive Stagea and look forward to replacing its prosaic Nissan VQ35 V6 with a turbocharged RB26DETT inline-6 from the previous-generation GT-R R34, making this car eminently driftable.

hmm 10k for the conversion...

Wonder if they would come here to do it for $17k???

Just needs a VQ35dett :)

Interesting article, but I wonder how accurate it is...

"This project begins with the current M35 Stagea"

Nope. M35 Stagea's ceased production in 2007.

That is the 2001-2004 Stagea.

"...they've stuck with the rear-wheel-drive Stagea and look forward to replacing its prosaic Nissan VQ35 V6..."

Nope.

That is a VQ25dd...

I know, I am being anal... but I would like to think that if someone writes an article, they would get their facts straight (or do a little research).

Should be interesting to see how they mate up the RB26 and which transmission they use.

a quick notch of the firewall and it would be fine. The C34 has a dash about half the depth of a M35 so no problems there. I cant say I think the handling would be up for much though, with all that extra cast iron hanging forward of the front axle. Still, it would be good to see, in the way that the S1 drift "ute" was cool.

lets do it

10K just for the body right?

10k for the conversion, but I guess it would cost that for the parts and shipping.

Would look bloody ace in your yellow... err I mean gold. :)

Edited by iamhe77
yup

most car magazines/websites are horrendously inaccurate! No one checks anything these days........

i remember when i had my feature, and i got the copy of the mag sent to me in the mail, i start

reading it and im like wtf, thats not how it went, no he didnt do that part!

It was all totally wrong but i guess they have to "edit" it to make it sound more interesting than it

is!

sounds like a car magazine!!

my mate had a car featured also, he wasnt even listed as the owner!!!! the guy that TOOK the car to the shoot they had as the owner. useless people really

sounds like a car magazine!!

Yeh especially when they give credit to the wrong people, i get annoyed when someone plays

a big part in a build but only got a small mention or they put down that someone else did part

of the work that they didnt even do!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...