Jump to content
SAU Community

Recommended Posts

Nice brake kit!... drooooool

those 2500's will be fine, better pad for the street IMO... the 3000's just chew up your rotors when cold... you won't run out of braking with that setup:)

you don't need to learn to drive, you have a GTR, just point it where you want to go and step on the loud pedal! ;) ... best place to start would be on the Deca skid pan and I'm sure there are a bunch of people there who would love a close look at the car... it would be a weapon around the cones with its quick response

Pictorial of more HKS goodness...Hmmm.... 2.8L Step 2 capacity upgrade kit rated 588kw:

Forged Piston kit (nickel plated & piston surface has a final molybdenum coating):

39536356.jpg

52470659.jpg

Note the valve relief pre-machined on the piston top

48133825.jpg

82104185.jpg

61371416.jpg

H cross section connecting rods:

55479821.jpg

75229039.jpg

60110804.jpg

55171440.jpg

20697678.jpg

Fully forged & balanced counter crankshaft:

31629446.jpg

69826248.jpg

Sorry, I did not unwrap the crankshaft for some reason.

The fully balanced crankshaft makes the engine feel much smoother at high rpms, even at idle the engine noise and vibration is minimal.

Nice rod design. I like the extra material where the mating surfaces are between the rod and bearing cap. Makes for less material distortion to push the bearings out of round when the bolts are torqued to spec.

Are you aiming for over 500kw? Just wondering why you went for the step 2 pistons with the nickel coating. Having a ceramic coating instead would have been fine for less power and have been more streetable due to less heat transfer to the oil.

I'd like to see some before and after proof of the V-Cam system working (i.e. actually tuned correctly)... I'm in very close contact with the HKS tuner from Sydney and it's not just as simple as what you've put down.

Nice build.

If you are scared of nailing the loud pedal then you really need to take it to a place like Sandown and open the taps in the thing....just remember the middle pedal and get the thing slowed down as i am guessin the thing will be a bullet.

LOL, makes me laugh that Adam has a similar engine in a rwd GTSt....MADNESS!!!!!

GTRNUR Posted Yesterday, 11:22 PM

Are you aiming for over 500kw? Just wondering why you went for the step 2 pistons with the nickel coating. Having a ceramic coating instead would have been fine for less power and have been more streetable due to less heat transfer to the oil.

Hi GTRNUR,

I am aiming for good low end response rather than peak power, that's why a pair of Garrett's 2860-5s have been chosen rather than a big single banger. I am aiming for over 400rwKw.

I went for Step 2 because that's what Beno recommended. I know its a lame explanation. But every time I deviated from his recommendation I end up getting compromised result.

Roy Posted Today, 02:08 PM

Nice build.

If you are scared of nailing the loud pedal then you really need to take it to a place like Sandown and open the taps in the thing....just remember the middle pedal and get the thing slowed down as i am guessin the thing will be a bullet.

Thank Roy.

Sandown is definitely on agenda, maybe after a run or two at the drag strip first. I am still learning to launch the car properly. The problem is its not the thing to practice on public roads!

Cheers

Matt

I am aiming for good low end response rather than peak power, that's why a pair of Garrett's 2860-5s have been chosen rather than a big single banger. I am aiming for over 400rwKw.

I went for Step 2 because that's what Beno recommended. I know its a lame explanation. But every time I deviated from his recommendation I end up getting compromised result.

Not at all. The smartest thing you can do is put your trust in a builder with the skills of Ben at Racepace. Im sure he has his reasons for suggesting the step 2 kit. Perhaps for a simple a reason as planning for the future, or maybe the valve pockets accomodate more valve lift with the v-cam setup.

How long till the block machining and assembly starts? Are you intending to use your factory engine block or are you building up the RB28 in another N1 block?

Thanks for sharing,

Ian

Hey Ian,

Actually the build is all complete! :D This is more like a retrospective build thread. I guess I am keeping everyone in suspense.

The original NUR engine was kept as a long block and a brand new N1 block was purchased and machined.

Cheers

Matt

Ah... i suspected as much. That explains your comment about how scary fast it is a lot better. If it were that way before you undertook these changes you'd probably never drive the car after the build was finished.

Glad you kept the original engine intact as well.

Thanks for comments guys.

Let's showcase more parts:

Garretts GT 2860R - 707160-5 goodness:

19021152.jpg

85413105.jpg

47339041.jpg

52246082.jpg

27959788.jpg

Let's see how much boost these puppies can generate!

Nismo Twin plate super coppermix clutch, rated at 640ps:

51987984.jpg

90569937.jpg

18736025.jpg

41708694.jpg

24178582.jpg

I don't know why I did not take it out of the plastic bag for a decent photo :P

Nismo AFM:

19091296.jpg

Tomei Oil Pump:

87731862.jpg

93325818.jpg

37818530.jpg

Sard 700cc injectors:

83081948.jpg

13032030.jpg

So, that's pretty much a wrap up of all the parts for engine rebuild. Note absence of upgraded fuel pump, regulators, boost controller, fuel rail etc., as the stock items are considered to be good enough. Oh, actually I forgot the new N1 block, which I don't have any photos as the engine block was sent straight to machine shop.

wow this is an impressive car! Congratulations on an exceptional build so far.

Think you need the nismo's on there though, but after seeing the nismo's next to the 19" te37's they look small so time for some 19x10.5 lmgt4's...

Do you mind if i ask what you do? Feel free to tell me to bugger off though!

cheers, Tim

Found a photo of the new N1 block mounted on an engine stand:

dscf0188h.jpg

And out with the 'old' NUR engine:

36490074.jpg

If there is anyone interested in a genuine NUR long block with low mileage, then please pm me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...