Guilt-toy In Georgia (former Soviet Union)

[Guilt-Toy]

the engine build room is in the far rear of the shop, il get some pics in the next day or so. it does not get dirty or dusty in there.

[Guilt-Toy]

Nissan TB48, forged internals only, Vipec v88 ecu.

COMPLETLY stock head which as pretty much the same VCT as an RB25DET! stock cams springs everything. 2 bar boost. its got a borg warner turbo of some sort.

I managed a max 794rwhp the power figure shown was toned a little for street use.

Crazy customer... I call him "Mr crazy" in arabic

[NYTSKY]

Thats awesome!

[Guilt-Toy]

Soooo... Alot has been happening the last week... I tuned the 2012 V8 VK56DET Nissan Patrol with the Vipec V88, Customer is VERY happy with it considering its only on 5psi boost...

Anyway he calls me the next morning and said I have to go with him because he is building a drift car, and he wants one a RB done by me...

So we go for a drive to the jap part of the UAE, 1.2 hours drive and then he hands over a wad of cash for this baby...

Anyway little did I know that the car he was building he already purchased, a 2004 Nissan 350z. He handed me the car and I drove it around for a few days... Now we removed the engine from the half cut and the 350z, but found the 26 had alot of end float in it and the crank is shagged... ahhh well.. no matter we will rebuild it!

[Guilt-Toy]

So after changing the cams in my old RB30DET i started to suffer some misfiring, Paul from Red R Racing mentioned that I am starving the top end of oil with my sydney kid restrictor configuration and i should open one back up again, so I decided to do just that and also get some valve springs from performance springs in QLD.

got the springs and decided to take the engine out of the car, lucky I did because the week before I kinda tried a 3rd gear anti lag launch and kinda fried the clutch up pretty bad and as suspected it was stuffed. My Jim Berry full monte race clutch done me very very well! 4 years of abuse and in the last 3 months of its life it ran a 10.8 second quarter!

Anyway the clutch was shagged, quick call to Jim Berry and he let me in on some of his secrets of the clutch that was built for me, and how I can get the flywheel back to new again by making a new insert for it! so i got the parts and sent it off to the local machine shop, and what do you know! they managed to pull it off! I re-machined the pressure plate which was still clamping good and Jim made me a new clutch plate after i read the numbers off the old one and got it to me here in the UAE in less then 5 days including shipping time! What a champion!!!! Thanks Jim !!!

I removed the head from the old RB30DET I screwed together back in 2007, and what was inside came as quite a shock!

160,000+ km , 4 years, 3 countries, 2 cars, 3 turbo's... 10.8 second quarter @ 135mph (done months before i opened it) All kinds of different fuels, aussie 95 98, e85, Georgian pump gas 91 and 98 octane with god knows how much vodka spirits mixed in to get the octane up, and even Q16 VP racing fuel and UAE fuel which is really good....

The funny thing is this old RB30DET traveled more on the road then it did by ship!

Specs of the engine is

ACL Forged Pistons

Precision Motorsports Rods

ACL Race Bearings

Crank Collar and N1 oil pump.

Not even 1 sign of detonation or knock marks or anything, the pistons were in perfect condition with just alot of carbon build up, the head was perfect also, no marks scratches or anything I was in pure disbelief that after all this time the engine was still going strong and really if i did not change the cams it would never have needed to be opened anyway!

The head gasket was in such good condition that I RE-USED IT!!

You can tell alot about a tune on a engine that has blown up after opening it and looking inside,

so you can tell alot about a tuner by opening his own daily / drift / drag / world traveled RB30DET and take a look inside! =)

Remember this car was fully street legal / emissions tested and engineered before it left the country!

So we started work on the Suspension parts, Parts ordered.

Installation time!

I got alot of work on setting up the suspension, I have added sooo many adjustments down there and have no frigging idea what to do with them and nobody here knows either, I guess thats one way that I learn best... get in there and just do it yourself. always interested in you guys suggestions and opinions on whats the best drift / track / street setup if you would like to share... *hint hint*

Will post up some more stuff soon, Been sooo busy these days its just been crazy!

Some good news though, I am going to come home for a visit holiday from around mid december to mid january, and could be available for some tuning to the right guys, drop me a PM if you are interested.

[TiTAN]

if you happen to be down in Canberra during that time i wouldn't mind a bit of a retune and bump the boost to ~26psi maybe more .

[Trozzle]

if you happen to be down in Canberra during that time i wouldn't mind a bit of a retune and bump the boost to ~26psi maybe more .

I like this.

[Guilt-Toy]

Can not find a crank.... they all go to the scrap yards....

So.....

Picture says a thousand words =)

[DVS JEZ]

Looks powerful

[zebra]

What do you need a crank for?

[TiTAN]

the customers car that has a f**ked 26 crank.

[zebra]

ahhh I see

[TiTAN]

anyone else interested in getting their car tuned while Guilt-Toy is in the country?

[Trozzle]

I wouldn't mind sorting some more midrange lol. Not worth the time though

[Guilt-Toy]

i am back in Australia! and wow that 14 hour flight was hard.... damn

[wolverine]

Welcome home to winter GT.

[Guilt-Toy]

yeah about that.. what is the go? i cannot understand it?

[NYTSKY]

Welcome back Anthony!

[wolverine]

yeah about that.. what is the go? i cannot understand it?

None of us understand it either.

[JonnoHR31]

Welcome home to winter GT.

come to perth, winter compared to last year but still 30+