Jump to content
SAU Community

Recommended Posts

How much power and so on do you want?

If you are looking for a good solid base to make 260-290rwkw from without opening the motor. RB25 is the choice.

If you want to make over 300rwkw, plany to rebuild and so on, the RB26 is the better 'base' to start with.

How much power and so on do you want?

If you are looking for a good solid base to make 260-290rwkw from without opening the motor. RB25 is the choice.

If you want to make over 300rwkw, plany to rebuild and so on, the RB26 is the better 'base' to start with.

dude...i dont have that kind of money to make the skyline a monster. 260-290KW is alright for me. Ill probably go rb25det s2 then. After i get that done, ill throw in a aftermarket turbo of some sorts. I should easily reach 200rwkw...you think?

why a NEO vs a standard RB25 when you're going to mod it anyway? I admit the NEO has much better fuel economy in stock form, but they seem to be more tempermental than the normal RB25, especially when it comes to strange things like spark plugs :S

What do you ultimately want to do with the car?

IMO an RB25DET NEO is better than an RB26DETT for a moderately tuned street car. For a serious track car, RB26 has all the performance parts readily available to make big power.

i plan to make it a quick street tuner, since its my only car. After im done with the engine, i'll probably start working on the forced induction, then the internals. Looks come last...

What do you ultimately want to do with the car?

IMO an RB25DET NEO is better than an RB26DETT for a moderately tuned street car. For a serious track car, RB26 has all the performance parts readily available to make big power.

RB26= ITBs= throttle response. run N1 turbos for an undetectable 300rwkw. RB25 cant have an undetectable 300rwkw turbo :P

RB26= ITBs= throttle response. run N1 turbos for an undetectable 300rwkw. RB25 cant have an undetectable 300rwkw turbo ;)

RB25 will be fine and if you get bored of it you can always pick up an RB30 bottom end.

RB25 will be fine and if you get bored of it you can always pick up an RB30 bottom end.

So an Rb25 with a 3071/3076, or an RB30 bottom end is going to be EPA legal/cop friendly? an engineered RB26 swap would be... just because your laws arent as tight as ours now, doesnt mean they wont be in future...

So an Rb25 with a 3071/3076, or an RB30 bottom end is going to be EPA legal/cop friendly? an engineered RB26 swap would be... just because your laws arent as tight as ours now, doesnt mean they wont be in future...

I though that depending on the year of the R32 GTST you would be able to get an RB30 block that could be engineered as well as it would be newer or more current.

Also if a car is engineered in the past and the rules change the car is still legal due to the previous certification.

the need for it to be epa legal / cop friendly may also depend on your driving style and choice of location too.

Nissan never made a 25/30 - therefore you cannot have one without emissions testing in some states.

Other states it is basically impossible (vic), to ever have it approved.

A 3ltr conversion, on its own merits, is against ADR's from the start without the above.

Can't you get about 240rwkw out of a 26 with just a bit more boost?

P.S. my 25/30 is legal :yes: and with the new IM240 testing they are trying to implement here, means I should be able to get the high mounted, externally gated GT35R passed too aslong as it passes emissions testing :cool:

GCG hi-flow, 250-260rwkw, standard size.

Problem solved in my book.

Another dumb Q...GCG..Is that a brand or an abbrieviation like OMG

DW..i googled it...Soooo...how much we looking at..$$$$$

Edited by doozooby
GCG hi-flow, 250-260rwkw, standard size.

Problem solved in my book.

True, I had sort of forgotten about highflows as my current car has a HKS lowmount :D

Another dumb Q...GCG..Is that a brand or an abbrieviation like OMG

DW..i googled it...Soooo...how much we looking at..$$$$$

http://www.gcg.com.au/

True, I had sort of forgotten about highflows as my current car has a HKS lowmount :blush:

http://www.gcg.com.au/

sorry too keep going on rb25 head/rb30 short block no need for rb26 head($3000) rb25 head 450-500$ flow and diemensions very similar. rb 26 valve covers fit easy. rb 30 bottom 25 head ITS turbo = fun .just done one 657hp 21psi kind of wish i didnt very hard to drive but fun. dont be harsh im new here. if you were that way inclined! >_<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...