Jump to content
SAU Community

Recommended Posts

just bought a nitrous system for 700 buks, second hand but never been used. come with a 25lb bottle and bottle warmer!!

Planning on hooking it to my rb20 "32 A.S.A.P

Just wondering on the power increase figures?? It come with a 150hp "jet" and a 200hp "jet"

I no what the jet does and so on but im wondering it this will give me an instant extra 150-200hp?

And mostly will the motor be able to handle this NOS!

Link to comment
https://www.sau.com.au/forums/topic/288873-nitrous/
Share on other sites

What is currently done to the car? We talking a wet kit or a dry kit? What brand? Lol i wouldnt be putting such high jets into the car if it is fairly standard, that is a lot of nitrous and fuel and if you don't know what you are doing you will kill it instantly. Use a 75HP shot and see how you go, work your way up. Make sure your injectors and pump are good. Do you know much about nitrous? By the sounds of things i don't think you do. Take it to some one that knows what they are doing, if not you will do some damage...

Power figures vary from engine to engine, but in essence yes, it will give those approximate numbers if the fuel jet and nitrous jet are the right sizes.

Edited by PM-R33
Link to comment
https://www.sau.com.au/forums/topic/288873-nitrous/#findComment-4838070
Share on other sites

there is a place in ballarat that refills the bottle

getting DR DRIFT to do the install and potential tune and its only guna be used for racing purpose only.

And na i dont need nos to get past the 180, because its hits 180 in 3rd with an auto....

Link to comment
https://www.sau.com.au/forums/topic/288873-nitrous/#findComment-4839383
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...