Jump to content
SAU Community

Recommended Posts

car (2003 m35) drives fine in normal mode, hubby accidentally knocked it in snow mode i got in and it shudders big time when you turn the steering wheel.

is this normal???

does anyone know what is wrong with it if it isnt?

please HELP!!

thanks.

Link to comment
https://www.sau.com.au/forums/topic/289031-shuddering-stagea/
Share on other sites

Are you in reverse, "D" or a gear (tiptronic mode)?

I ask because mine used to do it (2 years ago) when reversing very slowly.

Changed to a good quality transmission oil and all was fine.

Just started doing it again recently... but I know I was low on trans oil as I was on my way to get some more.

Maybe check/change your transmission oil for starters?

Is it shuddering like torque steer shuddering?

Snow mode engages the 4wd, like a centre diff lock, and makes the car drive off in 3rd or 4th gear. All of this would make the car shudder at low speeds especailly in a tight bend, but I think it all disengages above 40Kph.

If you drive the car in Syncro or Snow mode on dry hard surfaced roads the car will shudder like hell when you turn the steering wheel. That is the dif locks going "shit" the wheels are turning at different speeds.

Yes, very normal.

If it does it when you are NOT in Syncro or Snow mode it is a problem.

Cheers

Andy

Snow mode engages the 4wd, like a centre diff lock, and makes the car drive off in 3rd or 4th gear. All of this would make the car shudder at low speeds especailly in a tight bend, but I think it all disengages above 40Kph.

Snow mode makes it start in 2nd gear and reduces boost and drops out above 40kph.

If you drive the car in Syncro or Snow mode on dry hard surfaced roads the car will shudder like hell when you turn the steering wheel. That is the dif locks going "shit" the wheels are turning at different speeds.

Yes, very normal.

If it does it when you are NOT in Syncro or Snow mode it is a problem.

Cheers

Andy

WAS a problem. :P

If you drive the car in Syncro or Snow mode on dry hard surfaced roads the car will shudder like hell when you turn the steering wheel. That is the dif locks going "shit" the wheels are turning at different speeds.

Yes, very normal.

If it does it when you are NOT in Syncro or Snow mode it is a problem.

Cheers

Andy

thanks Andy,

i was starting to think it was a problem it drives perfectly when not accidently clicked on snow or syncro.

sweet. now i can breathe easy lol.

thanks again guys :(

I did it the first night I had my stagea :( . But it's not a diff lock (stagea's don't have a centre diff to lock) but it puts the torque split 50/50 (front and rear) which at low speeds will cause a shudder while turning on dry ground. Do the M35's have a seperate button to engage the 50/50 torque split like the C34's or does just engaging snow mode do it for you? I don't believe just engaging snow mode in the C34's causes the 50/50 toruqe split to kick in too unless you hit that button as well.

I did it the first night I had my stagea :( . But it's not a diff lock (stagea's don't have a centre diff to lock) but it puts the torque split 50/50 (front and rear) which at low speeds will cause a shudder while turning on dry ground. Do the M35's have a seperate button to engage the 50/50 torque split like the C34's or does just engaging snow mode do it for you? I don't believe just engaging snow mode in the C34's causes the 50/50 toruqe split to kick in too unless you hit that button as well.

The M35 has a single button that is a rocker type switch. One way gives Syncro mode, which is 50/50 split but only to 40kmh. The other way is Snow mode and this does the same as Sncro but also makes the car start in 2nd gear, limits boost and cuts out at 40kph.

  • 1 year later...

The M35 has a single button that is a rocker type switch. One way gives Syncro mode, which is 50/50 split but only to 40kmh. The other way is Snow mode and this does the same as Sncro but also makes the car start in 2nd gear, limits boost and cuts out at 40kph.

When is it advisable to use Syncro mode?

When is it NOT advisable to use Syncro mode?

Can damage eventually be done somehow to the engine or transmission ?

I experienced shudder on the third drive I had which was very disturbing, but reading the posts my car is acting normally

I get some weird shuddering when i am turning right at low speeds, not left only right... series 2 c34

If you are talking about getting a sound like a ball bearing rolling around a tin can and shuddering when turning full lock in one direction could be a cv shaft rooted, thats what was causing mine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...