discopotato03 Posted September 26, 2009 Share Posted September 26, 2009 (edited) I can't agree with you there . Garretts own GT30 and GT35 (small frame GT BB versions) maps show you that the flow rates are similar between the GT30 turbine in their 1.06 A/R turbine housing and the GT35 turbine in their bored out 0.82 A/R GT30 turbine housing . The links to the turbine maps . http://www.turbobygarrett.com/turbobygarre...amp;3turb_e.jpg http://www.turbobygarrett.com/turbobygarre...8-allturb_e.jpg It looks to me like the GT30 turbine in the 1.06 housing size has less restriction in the lower pressure ratio zone than the GT35 has in the 0.82 housing . The fact that the three lines in the 35's map are a gentle curve rather than a sharp rise to a point and flat lining tells me that the GT35 turbine is too big for the GT30 family turbine housings . Purpose built (OEM) GT35 turbine based turbos use GT40 family turbine housings and not surprisingly their GT40 compressors live in GT40 compressor housings . Cheers A . Edited September 26, 2009 by discopotato03 Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4848718 Share on other sites More sharing options...
Al Posted September 26, 2009 Share Posted September 26, 2009 All i say is that i love my combo the way it is! It's a 525hp turbo and i'm squeezing 330rwkw out of it, so i'm pretty sure i'm maxing it out; hence why the boost drops as the rpms increase. Once max flow, of a turbo, is reached; any increase in rpm needs to result in a decrease in boost, as you can't have more than maximum flow. (hope that makes sense) When i'm making over 235rwkw and over 8600N of tractive torque @100km/h, what do i have to complain about Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4848742 Share on other sites More sharing options...
conan7772 Posted October 8, 2009 Author Share Posted October 8, 2009 Just fitted the GT3076R to an RB25/30.Engine management is Haltech S2000, closed loop boost control. Turbo kit came with standard Garrett 5psi actuator. Can only peak briefly at 18psi then drops to 15. 310 rwkw max. Really would like 330 - 340 Another example here is Als. Pretty much a similar engine to mine, injector sizes, cams, only he opted for the 15psi actuator. However Al only gained an extra 2 psi across the graph, and our curves are identical, same peak and drop, but he's got 20 kw more. Is this the typical symptom of the IW 3076 ? or is it still crap actuators ? If I was to fit a large can 18 psi actuator, could I achieve 21 psi flat line. Also wouldn't mind boost to come on a little earlier Please don't tell me to go External wastegate. Cheers. Just ordered the 18psi Large can Garrett actuator from ATP. Currently 310 rwkw with GT3076R RB25/30 555 cc injectors, 256 Poncams, 044, Haltech S2000, Plasmaman 72mm TB Anyone wanna predict the kws with an extra 6 or 7 psi. Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4869471 Share on other sites More sharing options...
TiTAN Posted October 8, 2009 Share Posted October 8, 2009 as with AL's setup unless you run it on E85/race fuel these turbos are unlikely to see anymore than 320-330kw. NYTSKY has 360kw but is using E85 and a huge fuel system to support it. Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4870195 Share on other sites More sharing options...
JonnoHR31 Posted October 9, 2009 Share Posted October 9, 2009 Hate to thread hijack but better than starting a new one. Does anyone have any pics of their dump/front setup with a iw gt30? I've got a bellmouth one at the moment but it seams way too restrictive, looking for ideas for a new one. Thanks Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4871894 Share on other sites More sharing options...
conan7772 Posted November 23, 2009 Author Share Posted November 23, 2009 (edited) Just ordered the 18psi Large can Garrett actuator from ATP.Currently 310 rwkw with GT3076R RB25/30 555 cc injectors, 256 Poncams, 044, Haltech S2000, Plasmaman 72mm TB Anyone wanna predict the kws with an extra 6 or 7 psi. PROBLEM SOLVED Large can actuator fitted. Had to re-thread it to attach it to my lever. No big deal. Holding 22 psi flat as f$#@ Could get 24 out of it but injectors are maxed. Full boost also 700 rpm sooner than before, response is just brilliant. 336.7 rwkw and 1120 Nm Gets up and goes like a 15 year old boy havin his first root. Edited November 23, 2009 by conan7772 Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4952276 Share on other sites More sharing options...
TiTAN Posted November 23, 2009 Share Posted November 23, 2009 when did they make an 8cyl RB? Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4952320 Share on other sites More sharing options...
discopotato03 Posted November 23, 2009 Share Posted November 23, 2009 When Olden was looking for a replacement for their 308 . Sort of VL Nissan thing - never took off . Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4952335 Share on other sites More sharing options...
Lithium Posted November 23, 2009 Share Posted November 23, 2009 Nice work!! Thats very good going, my large can actuator is due to arrive this week Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4952540 Share on other sites More sharing options...
dano4127 Posted November 24, 2009 Share Posted November 24, 2009 what do these actuators cost? Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4952944 Share on other sites More sharing options...
conan7772 Posted November 24, 2009 Author Share Posted November 24, 2009 what do these actuators cost? $59 US plus $20 freight from the states. Couldn't find any in Oz ATP have em. Rated at 18psi but we can dial it down to 14. The large can is better for response and tunability. Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4953043 Share on other sites More sharing options...
dano4127 Posted November 24, 2009 Share Posted November 24, 2009 $59 US plus $20 freight from the states.Couldn't find any in Oz ATP have em. Rated at 18psi but we can dial it down to 14. The large can is better for response and tunability. Got a link? Would this suit a Ford GT35? Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4953078 Share on other sites More sharing options...
conan7772 Posted November 24, 2009 Author Share Posted November 24, 2009 Got a link? Would this suit a Ford GT35? Yeah it's totally universal. Goto ATP Turbo.com search 18 psi actuator item is WGT-022 Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4953828 Share on other sites More sharing options...
dano4127 Posted November 25, 2009 Share Posted November 25, 2009 Sweet thanks mate!!! Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4954624 Share on other sites More sharing options...
SLAPS Posted November 25, 2009 Share Posted November 25, 2009 (edited) PROBLEM SOLVED Large can actuator fitted. Had to re-thread it to attach it to my lever. No big deal. Holding 22 psi flat as f$#@ Could get 24 out of it but injectors are maxed. Full boost also 700 rpm sooner than before, response is just brilliant. 336.7 rwkw and 1120 Nm Gets up and goes like a 15 year old boy havin his first root. Top work conan. I saw the same issue with mine before/after cams. Held the same max 17psi regardless that it was making 30rwkw more. Big head actuator problem solvered. Also saw the same on a mates GT35r .82 at around 300rwkw even though a GT35r at 300rwkw is hardly working. Stiffer actuators are the way to go on IW turbos. Edited November 25, 2009 by SLAPS Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4955405 Share on other sites More sharing options...
limpus Posted November 25, 2009 Share Posted November 25, 2009 $59 US plus $20 freight from the states.Couldn't find any in Oz ATP have em. Rated at 18psi but we can dial it down to 14. The large can is better for response and tunability. Hi mate, I'm running a 3076r too and was wondering if the above mentioned actuator is a straight fit replacement? Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4955541 Share on other sites More sharing options...
SLAPS Posted November 25, 2009 Share Posted November 25, 2009 Depends on the setup... Std exh manifold will require a slight kink to be placed in the rod. Aftermarket.. well that depends on your specific setup. The 18psi large can actuator has a straight rod - have a look at yours and see if there is a kink in the rod or if its straight. As for bolt up. Providing there is clearance it will bolt up. Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4955550 Share on other sites More sharing options...
limpus Posted November 25, 2009 Share Posted November 25, 2009 Depends on the setup... Std exh manifold will require a slight kink to be placed in the rod.Aftermarket.. well that depends on your specific setup. The 18psi large can actuator has a straight rod - have a look at yours and see if there is a kink in the rod or if its straight. As for bolt up. Providing there is clearance it will bolt up. Thanks mate, My 3076R has a bent rod and i'm using a custom low mount manifold...how would i be able to use the straight rod 18psi actuator in this case? Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4955715 Share on other sites More sharing options...
dano4127 Posted November 26, 2009 Share Posted November 26, 2009 ok so shipping from ATP is $95 - f**k that!!! Is that what you paid conan? It would cost them $20us max for express I spoke to MTQ they have a "small can" 19psi actuator there for $135 does that sound like it would do the job? I am getting my car tuned in a couple of weeks and want to try remove every possible weakness before it goes on the rollers RB30DET with internal gate XR6 GT35R currently holding 15psi with the standard actuator but next tune i want to up it to 22psi so thinking I will need the higher PSI actuator What is the benefit of "Large Can" ? Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4957327 Share on other sites More sharing options...
conan7772 Posted November 26, 2009 Author Share Posted November 26, 2009 ok so shipping from ATP is $95 - f**k that!!! Is that what you paid conan? It would cost them $20us max for expressI spoke to MTQ they have a "small can" 19psi actuator there for $135 does that sound like it would do the job? I am getting my car tuned in a couple of weeks and want to try remove every possible weakness before it goes on the rollers RB30DET with internal gate XR6 GT35R currently holding 15psi with the standard actuator but next tune i want to up it to 22psi so thinking I will need the higher PSI actuator What is the benefit of "Large Can" ? No mate, send ATP an email to sales, say that you want this item and ask for a standard freight to Australia. Forget tracking or registered postage. It's only an $60 item I mentioned the excessive shipping for such a small item and they returned to me with $20 US for shipping. Ask for a full invoice with instructions for payment and that's it. Large can holds higher boost pressures more accurately, provides better response and tunability. You won't be disappointed and the cost is bugger all. Took 10 days to arrive. We can tune it from 14 to 24 psi flat line. That's pretty damn good tunability for an actuator. We had to cut the straight rod and re-thread it to connect to my waste gate lever. I'll take some pics tomorrow... Link to comment https://www.sau.com.au/forums/topic/289241-gt3076r-iw-need-help-to-achieve-21-psi-flat-line/page/2/#findComment-4957450 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now