Jump to content
SAU Community

Recommended Posts

Got picked up last night for blue lights on my number plate but thats not the problem.

I got told i can't have 19" rims or higher. I said "what?" The cop says no car is now aloud to have anything larger then 18's since 4 weeks ago.

And he told me i can have neons on under my car at all times when driving as long as you can't see the GLOBE. Crazy!

Any one know more?

Link to comment
https://www.sau.com.au/forums/topic/289550-19s-and-up-now-illegel/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

^^ That's what I've thought for a while now, you're not allowed to go beyond 2" bigger than factory (unless you can use bigger rims, smaller tyres, to maintain the same circumference and not affect the speedo reading).

Good excuse to get those low-rider utes and bling show cars off the roads.

Yeh im pretty sure you will find the cop was either misinformed or he was just trying to find an excuse to sticker you. Did you actually get stickered or did he just let you know? If you did get stickered, i would go to the pits and find out the story, as im pretty sure Nic is right when he says they are legal up to 2" bigger, and then you have to use smaller profile tyres to maintain rolling diameter. If it turns out the cop was wrong, then i would make a complaint, cops really need to know what they are talking about when they go around handing out stickers and we pretty much end up paying a $150 fine trying to get it over the pits

Don't stress.. I am well known by tha cops. With how much of my time is spent dealing with tha cops, I had to of studied up on the law. How it was - anything larger than 2" from stock needed to be mentioned on the modification of vehicle form and be inspected at DPI. I can't say that this pig is wrong coz i haven't seen such sh*t, but the amount of times I correct the cops because they talk so much bullsh*t.. and having cars made factory with 20'z.. my guess is that he/she is dribblin sh*t to shake up the high performance scene! Honestly not worth talkin about, otherwise they HAVE made a difference. Although, they are very tight on this with the mini trucks because utes must have load tested wheels as they are commercial vehicles.

I was once pulled over for blue neon on my number plate and blue parkies in my headlight. The law states that your vehicle must have your number plate illuminated ( does not mention colour ). Therefore, I was made to change my parkies on the spot to avoid yellow sticker ( which only a dumb*ss wouldn't have ). And lived happily ever after!

Thirty FO

He said anyone with higher would get a warning then have a week or something to change them. He also said it's not illegel to sell them so dealers and tyrer shops can sell them.

I guess it's only a matter of time before the word gets around and people start getting pulled over more.

He did quote the law to me.

Lodge a complaint, a big one, make his boss's asshole bleed, then word will get around to not be a retarded cowboy.

Seriously guys, dont just take this shit and go over the pits, if you get stickered for legal mods of factory shit, give some verbal fireworks to WAPOL, preferably higher up, they did after all just cost you a day off work + money.

Edited by Nic_A31
He said anyone with higher would get a warning then have a week or something to change them. He also said it's not illegel to sell them so dealers and tyrer shops can sell them.

I guess it's only a matter of time before the word gets around and people start getting pulled over more.

He did quote the law to me.

He's just talking crap, I can guarantee that 19"+ rims are still legal.

Do you really think the DPI could change the law and not make some kind of announcement for the tens of thousands of car owners in WA with larger 19"+ rims.

On top of that don't you think the first people they'd need to tell is manufacturers and car dealers to inform them that every car they sell will now be conflicting with West Australian road laws. I'm pretty sure somebody buying a brand new GTR with 20" rims is probably going to want to know that his car isn't actually allowed on WA roads.

Seriously, the laws are: you can't have wheels any larger/smaller than 2 inches in diameter and then the same goes for rim widths.

If the law changes, you'll probably hear it from some more reputable source than some rogue traffic cop who decides to make up some crap to give you a yellow. When I got pulled over for an RBT not long after I got my car, I had a chat to a Senior Constable who I asked a few questions about what was and wasn't illegal, all the questions I asked were basic, straightforward things that anybody on these forums could answer; and he didn't know the answer to any of them. He had no idea if my pod filter needed to be secured, covered or if I was even allowed to have one. Most traffic cops don't know all the rules and a lot of the time they'll just be using their own personal judgment to decide if a car should be given a yellow sticker.

And spell illegal correctly.

:D

Oh and he's right about the neons, they're allowed, but you need to make sure you can't see the bare lights from pretty much any angle. And they can't be in colour combinations that could confuse drivers in terms of stop lights/headlights or police colours.

So generally no bright red lights on the back, no combination of red/blue and keep them mounted high enough so all the body kit/side skirting covers the lights apropriately.

Or even easier, take them out and throw them in the bin and you'll get pulled over much less often and avoid the chance of getting a yellow from a cop who's "best judgment" is flawed in respects to the Australian Design Laws.

Well seeing as you started two threads on the same subject:

You've been duped by a cop who "thinks" he can pull one over you. Ahh country cops, so "up with the times".

We are all governed by a national ruling NCOP14 http://www.infrastructure.gov.au/roads/veh...ng_3Feb2006.pdf

In summary we can not increase tyre width by more than 30% over stock (OEM) or placard.

So Front can go from 225 out to max 292 (rounded to nearest avail size 285)

Rear can go from 245 out to 318 ( or 315 next avail size).

You can have any size Ø rim as long as you maintain aspect ratio and the overall diameter of the tyre is not more than 15mm larger than stock.

Also the tyres must be load rated to suit.

I suggest you print it out, highlight the parts pertinent and keep it with you and if he hassles you again, show him the error of his ways, then bend him over and shove it up his a**.

Hallelujah brudda.................

P.S. If you call DPI they will tell you all traffic cops should be using the NCOP rulings now, and not what is on the DPI site as it's old info.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...