Jump to content
SAU Community

Recommended Posts

Hey Guys

tried searching with not much luck

im trying to source a split front/dump pipe for factory turbo setup on R34 GTT to complete my exhaust

i've read stuff about bos importing and AM performance, are they still around? does xforce do a split pipe for r34 gtt?

any help with my options currently would be great

contact details a bonus!

check justjap.com or import monster or rampant imports

thanks but that wasn't much help

justjap already checked, only have JJR belmouth front/dump pipe for r34 GTT, not interested in that

import monster got nothing for wat im after at the moment

rampant imports is now import monster so that was a dead end.

thanks anyway

anyone.....?

1st one had issues, this is my second one, im not getting another one only to find the same problem or maybe diff problems

i work mon - friday so can only go down there sats, and if it doesn't work, then i have to wait another week to go back and return it etc...

im over that part

buddy seriously lol

i have the jjr stainless front and dump pipe connected to a catco 3 inch hi flow cat and a custon cat back exhaust which me and my mate handbuilt. i have had a lot of issues with other products from jjr but the exhaust pipe was great.

u dont need a split dump pipe

ps just dont use there gaskets lol

Edited by GUN_METAL_GTR32
buddy seriously lol

i have the jjr stainless front and dump pipe connected to a catco 3 inch hi flow cat and a custon cat back exhaust which me and my mate handbuilt. i have had a lot of issues with other products from jjr but the exhaust pipe was great.

u dont need a split dump pipe

ps just dont use there gaskets lol

lol dude i kno i don't need a split dump pipe, right now i would jst be happy to find a front/dump pipe that fits... i jst want my exhaust complete

and fair enuff u didn't have issues with the jjr front/dump pipe, i have no doubt many have gone out with no issues

but this is my personal experience, and no doubt if u tried a product, had to return it and get a replacement and it still wasn't right 2nd time round, im sure you would be looking elsewhere aswell, 45minute drive for me each time to return it unecessarily

Edited by vudoo
  • 1 year later...

Hey mate, how did you go with this?

I wasnt happy with the just jap dump/front pipe either, the bellmouth part had quite a large lump in it which would slow flow down considerably, plus the guys installing it were constantly complaining saying it didnt fit nicely.

I am also looking for other options.

Bit pricey but was considering these two:

http://www.justjap.com/store/product.php?productid=18666&cat=0&page=5

http://www.justjap.com/store/product.php?productid=18454&cat=&page=1

$800 just for a dump and front pipe setup OUCH!

Does anyone in melb make up good custom ones?

I have one (BOS importing) that I will need to sell, but it's for a 4 door - not sure if they are the same as the 2 door versions.

It has served me very well but I need to replace it as I am changing turbo's.

Hey Guys

tried searching with not much luck

im trying to source a split front/dump pipe for factory turbo setup on R34 GTT to complete my exhaust

i've read stuff about bos importing and AM performance, are they still around? does xforce do a split pipe for r34 gtt?

any help with my options currently would be great

contact details a bonus!

I have one (BOS importing) that I will need to sell, but it's for a 4 door - not sure if they are the same as the 2 door versions.

It has served me very well but I need to replace it as I am changing turbo's.

I am definitely interested. Looking on the Just Jap site the difference is only for the catback, not for the dump/front pipe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, I’ve just finished fitting the timing belt on my RB25, following the standard procedure: rotate the crank twice, release the tensioner, then tighten it down. The belt feels tight, and you can see that clearly in the picture below I’ve heard some people say it’s actually better for the belt to be slightly loose rather than too tight, as excessive tension can lead to snapping. So that’s in the back of my mind. What I’m seeing is this:  • At idle, the belt looks fine.  • But when cranking and especially when revving (around 3–4,000 RPM), there’s a momentary flap/flex or flicker in the belt, which I’ve tried to capture in the video. So my question is — based on what you see, is this slight belt movement something you’d consider normal, or am I just being OCD? Could this amount of movement cause sync issues? Or is it just a harmless bit of flex under load?   from what I know belt flap and flex is expected when crank spins up and pull cam with it Would appreciate any thoughts or similar experiences.     IMG_7656.mov IMG_7657.mov
    • I've replaced the front brakes of my NA to 324 brembos and 350z calipers: i'm going for 225/40-18 up front and 245/35-18 in the back. I have Rays 7.5*19 ET35(225/35) in the front with 5mm spacers otherwise the calipers "lock up/ won't rotate". When i use the calculator i come up with 8*18 ET30 for 225/40...... but not sure i get problems with the calipers. Anyone riding around with 18 inch. that can confirm "that it'll fit"? In the back it's 7.5*9 ET30 (245/30) with the 5mm spacers, but there is no problem with the standard small brakes, so i want to take 8.5*18 ET25 (245/35).
    • Lol.. but then.. always come back to a JDM..
    • Glad to hear. If possible, get your tuner to check air's to make sure everything is still where it should be.
    • The problem with FB/Insta/Reddit etc comments relating to cars is simple. You get to ask a question once, and get one round of replies. For things that can actually be answered in a few lines of text, once, it's fine. After 6 hours, your original question is lost to the void. There are no follow ups, additional questions, anything. No project car is ever such a simple list of questions to ask. You need discussion.
×
×
  • Create New...