Jump to content
SAU Community

Recommended Posts

Hey Guys

tried searching with not much luck

im trying to source a split front/dump pipe for factory turbo setup on R34 GTT to complete my exhaust

i've read stuff about bos importing and AM performance, are they still around? does xforce do a split pipe for r34 gtt?

any help with my options currently would be great

contact details a bonus!

check justjap.com or import monster or rampant imports

thanks but that wasn't much help

justjap already checked, only have JJR belmouth front/dump pipe for r34 GTT, not interested in that

import monster got nothing for wat im after at the moment

rampant imports is now import monster so that was a dead end.

thanks anyway

anyone.....?

1st one had issues, this is my second one, im not getting another one only to find the same problem or maybe diff problems

i work mon - friday so can only go down there sats, and if it doesn't work, then i have to wait another week to go back and return it etc...

im over that part

buddy seriously lol

i have the jjr stainless front and dump pipe connected to a catco 3 inch hi flow cat and a custon cat back exhaust which me and my mate handbuilt. i have had a lot of issues with other products from jjr but the exhaust pipe was great.

u dont need a split dump pipe

ps just dont use there gaskets lol

Edited by GUN_METAL_GTR32
buddy seriously lol

i have the jjr stainless front and dump pipe connected to a catco 3 inch hi flow cat and a custon cat back exhaust which me and my mate handbuilt. i have had a lot of issues with other products from jjr but the exhaust pipe was great.

u dont need a split dump pipe

ps just dont use there gaskets lol

lol dude i kno i don't need a split dump pipe, right now i would jst be happy to find a front/dump pipe that fits... i jst want my exhaust complete

and fair enuff u didn't have issues with the jjr front/dump pipe, i have no doubt many have gone out with no issues

but this is my personal experience, and no doubt if u tried a product, had to return it and get a replacement and it still wasn't right 2nd time round, im sure you would be looking elsewhere aswell, 45minute drive for me each time to return it unecessarily

Edited by vudoo
  • 1 year later...

Hey mate, how did you go with this?

I wasnt happy with the just jap dump/front pipe either, the bellmouth part had quite a large lump in it which would slow flow down considerably, plus the guys installing it were constantly complaining saying it didnt fit nicely.

I am also looking for other options.

Bit pricey but was considering these two:

http://www.justjap.com/store/product.php?productid=18666&cat=0&page=5

http://www.justjap.com/store/product.php?productid=18454&cat=&page=1

$800 just for a dump and front pipe setup OUCH!

Does anyone in melb make up good custom ones?

I have one (BOS importing) that I will need to sell, but it's for a 4 door - not sure if they are the same as the 2 door versions.

It has served me very well but I need to replace it as I am changing turbo's.

Hey Guys

tried searching with not much luck

im trying to source a split front/dump pipe for factory turbo setup on R34 GTT to complete my exhaust

i've read stuff about bos importing and AM performance, are they still around? does xforce do a split pipe for r34 gtt?

any help with my options currently would be great

contact details a bonus!

I have one (BOS importing) that I will need to sell, but it's for a 4 door - not sure if they are the same as the 2 door versions.

It has served me very well but I need to replace it as I am changing turbo's.

I am definitely interested. Looking on the Just Jap site the difference is only for the catback, not for the dump/front pipe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...