Jump to content
SAU Community

Recommended Posts

Hi guys,

I put an 040 in the car a few months ago. Ran fresh wiring, new relay etc etc

Up until today, you could just hear it humming/sucking away. From inside the car you could just hear over the exhaust & from the outside you could barely hear the pump at all.

Today it has started whining/buzzing and it is significantly louder than normal. Should I be worried?

Edited by Yeedogga
Link to comment
https://www.sau.com.au/forums/topic/289920-bosch-040-just-got-more-noisy/
Share on other sites

if it makes you feel better, my 040 makes a hell of a lot of noise, all the time. gurgles, buzzes, whining...

very noisy pump. car has always been fine though, been running it for a year or two now.

I don't have a gauge so I haven't been able to tell. Car seems to be running fine though.

Mate go get an autometer gauge that you can put in your engine bay they're like $20 and hook it up to your regulator, its such a cheap mod for important information if you're running more than base fuel pressure.

Check your tank for shit!

Pull the pump out and inspect it for black dusty crap on the bottom. If that or anything else is on the strainer of the pump you need to remove the tank and have it cleaned.

My 044 went this way too, exact same symtoms. Started also getting fluctuating pressure.

Ripped it out and went a 023, still never figured out why it died. Was a genuine 044 too, strainer was clean, good wiring etc.

There just getting so hit/miss now it's not funny.

I really don't think it's anything to worry about, my 044 has been like this for a couple of years now with no issues what-so-ever.

My guess as to WHY is that it's probably working harder to pump the thinner hotter fuel around. It's basically because there is excess fuel travelling to a hot engine bay and back. Standard, our cars run a control module that drops voltage to the fuel pump at idle, these tend to get removed when aftermarket fuel pumps go in.

Edited by bubba
if it makes you feel better, my 040 makes a hell of a lot of noise, all the time. gurgles, buzzes, whining...

very noisy pump. car has always been fine though, been running it for a year or two now.

Same with mine. Mine has a very loud buzz & grgule sound since day 1 of getting it installed when my stock one died. The exhaust noise covers the pump noise up inside the car, however outside its very noticeable when you are near the rear of the car.

Being fine for about close to a year now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...