Jump to content
SAU Community

Help Me Diagnose My Faulty Coil.

PIOTREK

By PIOTREK,
in General Maintenance

 Share

Recommended Posts

PIOTREK Proficient

PIOTREK

Posted
Posted

As the topic indicated i have misfire at about 5.5k rpm and have got a second coil pack that i want to fit. However i only want to change the faulty coil. How do i diagnose which is the faulty one?

I would rather not run the car 5 cylinders red line the crap out of it

Any ideas?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/289958-help-me-diagnose-my-faulty-coil/
Share on other sites
madbung Grand Master

madbung

Posted
Posted

Usually the problem is a hairline crack in the coilpack body which allows the spark to follow the path of least resistance and arc to the head. Remove coil cover, move car to a dark place, start car, get someone to rev it while you try to spot which coil is arcing out....replace.

PIOTREK Proficient

PIOTREK

Posted
  • Author
Posted

Moodles2 can you please elaborate on your post. You saying to buy a cable and run it from the ecu to the COMP and i need the program? Where can i download/ buy the cable?

I'm not sure if it will spit out any fault codes cause the check engine light doesn't come on, it is only really mild miss fire but still need to fix it!

iseekool Veteran

iseekool

Posted
Posted

If you have an R34 - Better get a set of new coils (splitfire brand). Once one coils starts to fail the others will not be too far behind.

Best get a new set it will save you hassle especially if you drive far from home alot.

Moodles2 Grand Master

Moodles2

Posted
Posted
Moodles2 can you please elaborate on your post. You saying to buy a cable and run it from the ecu to the COMP and i need the program? Where can i download/ buy the cable?

I'm not sure if it will spit out any fault codes cause the check engine light doesn't come on, it is only really mild miss fire but still need to fix it!

This only applys if you still have the stock ECU. Your Skyline has a fuse box under the steering wheel, inside is the Consult port (aka diagnostic port). With a Consult USB cable (http://ecutalk.com/interface.aspx) you can connect a PC or laptop and read sensor values, do active tests etc as long as you have PC software like OBD ScanTech (free) or Nissan DataScan (commercial), this is a screen shot of Nissan DataScan (commercial version not the cut down evaluation version) with the page to cut off spark to cylinders, effectively disabling them.

datascanactivetest.JPG

mad082 Grand Master

mad082

Posted
Posted

the problem with using the consult method is it isn't that reliable for what he wants to find out. at idle the weak coil may be firing fine and simply switching of cylinders won't find the dodgy coil.

swapping the coils out 1 by 1 will give the most accurate results, however if more than 1 coil is failing then it won't help much.

also, before you start swapping coils around, how old are you plugs, what gap are they, what heat range and what type are they? if you plugs are getting old and worn then they may be the problem and not the coils. in my case when i had a missfire it was caused by the plugs and not the coils.

PIOTREK Proficient

PIOTREK

Posted
  • Author
Posted (edited)

far out i'm confused! lol yer well tonight i'm gonna pull it all apart and see wats happening under there :thumbsup:

Only problem is that it doesn't constantly miss! Last night on the way home it was running fine on full bost and the the red line, but the day before it was missing!

is the r33 series 1 coil pack the same as the series 2?

Edited by P1OTR
Benzino33 Experienced

Benzino33

Posted
Posted
s1 has a seperate ignitor pack (same as r32). series 2 have it built into the coils (same as r34).

Thats right, I put r32 gtr coils in mine wen I had a miss. But does that mean all rb26 coilpacks are the same? or will the r33gtr ones be like the series 2 coils?

Benzino33 Experienced

Benzino33

Posted
Posted
so in short i can't put an series 2 coil in a series 1?

nah man u cant, they simply wont ignite.there will b no connection.

series 2's hav their own igniters on each coil pack but a series one only has the one firing up all 6

Benzino33 Experienced

Benzino33

Posted
Posted
the r33 gtr coils i have seen were like the s1 and r32, but i don't know what year series gtr it was.

ah true,,how many series 33gtrs are there? and wat r the differences

Benzino33 Experienced

Benzino33

Posted
Posted
I have a set of s1 coils somewhere, what side of town are you Peter.

hey, he's mate of mine, he's down Narre side.

Ey Piotr,i got 4 good spare coils if u need, but if ur closer Madbung, go ahead

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Fuark, at least the motor survived. What brand was the fitting that snapped?
    • GTSBoy
      Anyone running the VQ37VHR with forced induction?

      By GTSBoy · Posted

      Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • GTSBoy
      Starter motor replacment teeth count.

      By GTSBoy · Posted

      Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...