Jump to content
SAU Community

Recommended Posts

Hey y'all! :)

Just wanted to share what I've done to my stagea

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

Apart form that I changed LEDs to red, just something for myself.

post-65692-1254388614_thumb.jpg

post-65692-1254388673_thumb.jpg

post-65692-1254388746_thumb.jpg

post-65692-1254388808_thumb.jpg

post-65692-1254388888_thumb.jpg

Hey y'all! :)

Just wanted to share what I've done to my stagea

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

Apart form that I changed LEDs to red, just something for myself.

post-65692-1254388614_thumb.jpg

post-65692-1254388673_thumb.jpg

post-65692-1254388746_thumb.jpg

post-65692-1254388808_thumb.jpg

post-65692-1254388888_thumb.jpg

Cool, so the G35 is obviously quite compatible, since you are viewing fuel usage info etc. I thought you had to re-chip the stereo... nice

needs modification? or straight fit? with all the navi working fine?

will i be able to get maps put on this unit? or same story again with no car in australia with the australian maps that will load on this unit?

needs modification? or straight fit? with all the navi working fine?

will i be able to get maps put on this unit? or same story again with no car in australia with the australian maps that will load on this unit?

same question..

i thought US goes by Miles not km's?

did you converit it over?

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

whats so hard about it. he had a navi car to begin with and bolted the USDM gear into it. the cruise unit came from me.

I wasn't :cool:

if you can put a band expander into it then you are pretty much done. out with one section and in with the other. the navi unit plugs in. there are a few spare leads left over from the TV side of things but thats it. the LED's - pass. too many and way too fiddly for the average punter.

only minor downer is the lack of AM. FM is useable.

chipping the radio was something I was working on and I cannot get the thing to stop drifting off the station..

Edited by Chris Rogers
still the same issue. no maps.

Aren't the US and JAP navi systems different though?

I thought that the Japan system is a Xanavi... not sure about the US system, but maybe something over here uses the same type of navi? Toyota maybe??

similar chassis though it runs a different software mapping engine to anything here.

vlad's idea fixed the most common bugbears of these cars. he did lose the TV option though. (I'm assuming he had it in the first place.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...