Jump to content
SAU Community

Recommended Posts

Hey y'all! :)

Just wanted to share what I've done to my stagea

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

Apart form that I changed LEDs to red, just something for myself.

post-65692-1254388614_thumb.jpg

post-65692-1254388673_thumb.jpg

post-65692-1254388746_thumb.jpg

post-65692-1254388808_thumb.jpg

post-65692-1254388888_thumb.jpg

Hey y'all! :)

Just wanted to share what I've done to my stagea

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

Apart form that I changed LEDs to red, just something for myself.

post-65692-1254388614_thumb.jpg

post-65692-1254388673_thumb.jpg

post-65692-1254388746_thumb.jpg

post-65692-1254388808_thumb.jpg

post-65692-1254388888_thumb.jpg

Cool, so the G35 is obviously quite compatible, since you are viewing fuel usage info etc. I thought you had to re-chip the stereo... nice

needs modification? or straight fit? with all the navi working fine?

will i be able to get maps put on this unit? or same story again with no car in australia with the australian maps that will load on this unit?

needs modification? or straight fit? with all the navi working fine?

will i be able to get maps put on this unit? or same story again with no car in australia with the australian maps that will load on this unit?

same question..

i thought US goes by Miles not km's?

did you converit it over?

Basically just bought an infiniti G35 2003 model Stereo CD center console with navigation + DVD player and fitted it to my stagea.

whats so hard about it. he had a navi car to begin with and bolted the USDM gear into it. the cruise unit came from me.

I wasn't :cool:

if you can put a band expander into it then you are pretty much done. out with one section and in with the other. the navi unit plugs in. there are a few spare leads left over from the TV side of things but thats it. the LED's - pass. too many and way too fiddly for the average punter.

only minor downer is the lack of AM. FM is useable.

chipping the radio was something I was working on and I cannot get the thing to stop drifting off the station..

Edited by Chris Rogers
still the same issue. no maps.

Aren't the US and JAP navi systems different though?

I thought that the Japan system is a Xanavi... not sure about the US system, but maybe something over here uses the same type of navi? Toyota maybe??

similar chassis though it runs a different software mapping engine to anything here.

vlad's idea fixed the most common bugbears of these cars. he did lose the TV option though. (I'm assuming he had it in the first place.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Based off what you’ve said here, I think I’ve figured out a good bit of what I’ve done wrong -  So on the line going from the PCV valve to carbon canister, there’s a T joint that is pretty much right next to that lower port - I hadn’t noticed that the hose in the diagram was curved to attach onto the carb, so I was putting that line for the lower port onto the PCV line / carbon canister line instead. I’m going to have a flick through the manual again tomorrow and should hopefully find a diagram that’ll show me where that T joint should be connected to. Timing also 100% needs to be sorted out as well, should be able to tackle that tomorrow as well. Definitely feel like I should be on the right track now though. 
    • The screw is for idle (pilot circuit) mixture adjustment. Else, I'm confused ~ the diagram shows 2 carby ports, and the intake manifold port, but you're suggesting the "2nd port on the back of the carb that isn’t mentioned in the diagrams" ...yet, both carby ports are shown...que?... ...in any event, that port should be connected, but if not (like it is now), it's unlikely to cause a backfire out the carby (it would introduce false air and give you a fast/lean idle) ...sounds more like timing issues/spark plug wire routing responsible for the backfiring.    
    • That's fair, I can see both points. I get enthusiastic when I see the FS section has a new post and want to see what interesting thing someone is selling. Then I get deflated it's a bump of a 10 year old post. Ha ha
    • Couple of litres of moonshine from his southern cousins would do it...
×
×
  • Create New...